SHOP NEWEST COFFEE GEAR

A round-spout latte art pitcher in matte black, sized for small milk based drinks and precise pour placement. The 10oz Latte Art Pitcher with Wide Spout in Black pairs WPM's signature slanted top with a compact, wide-diameter body, giving baristas a practical tool for macchiatos, cortados, and piccolos where careful placement matters more than volume.

Built on WPM's proven #26 pitcher body, this matte black edition combines a food-grade stainless steel interior with a durable powder-coated exterior. The result is a pitcher that holds its finish through daily service while keeping pours controlled at small volumes.

Why you'll love it

– Compact 10oz body sized for macchiato, cortado, and piccolo pours.

– WPM #06 round spout delivers a moderate, consistent flow for precise placement.

– Signature slanted top brings the milk stream closer to the crema surface, reducing the tilt needed to start a pour.

– Wide body diameter supports easier steaming and milk texturing despite the pitcher's compact size.

– Full handle accommodates multiple grip styles for comfort and stability.

– Matte black powder coated exterior resists dings and holds its shape under repeated daily use.

Recommended for

– Macchiato, cortado, and piccolo service.

– Precise milk placement in small-format pours.

– Hearts, stacked tulips, and wing base tulips.

– Baristas learning pattern control before moving to narrower or wider spout profiles.

Design philosophy

This pitcher reflects WPM's long-standing approach to latte art equipment: pair a reliable, well-tested body with a spout profile matched to a specific pour volume. The WPM #06 spout belongs to WPM's Push and Flow, Service Pour series, developed to keep milk flow moderate and consistent rather than fast, which suits smaller cups where overpouring is easy.

Fitted to the 10oz body, the same #06 spout reads proportionally wider than it does on larger pitchers, while keeping its round profile and predictable flow. The slanted top, a detail original to WPM's pitcher line, angles the stream toward the crema sooner, so the barista does not have to tilt the pitcher as far to begin a pour.

Design features

WPM #06 round spout

The #06 spout is part of WPM's Push and Flow, Service Pour lineup. It produces a moderate, consistent flow rather than a fast or narrow one, which gives baristas more time to place milk accurately in small cups. At this 10oz volume, the spout suits hearts, stacked tulips, and wing base tulips, and its forgiving flow makes it a practical starting point for beginner and beginner-plus baristas building pattern control.

Signature slanted top

The slanted top is original to WPM's pitcher design and directs the milk stream at an angle that reaches the crema surface sooner. This reduces the tilt needed to start the pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.

Wide body diameter

Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even in a pitcher sized for small pours.

Full handle

The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to the final finishing lines.

Matte black powder coated finish

The exterior is finished with a matte black powder coating over food-grade stainless steel. The coating resists dings and helps the pitcher hold its shape under the repeated handling of daily café use.

304 (18/8) stainless steel construction

The pitcher is built from 304 (18/8) food-grade stainless steel. The interior is left uncoated, keeping it food safe and easy to clean after each use.

Performance

Recommended drink sizes

The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. This keeps the milk volume matched to the cup, avoiding excess steamed milk left over after the pour.

Pouring characteristics

The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Combined with the slanted top, this supports precise placement and finer detail work at small pour volumes, including hearts, stacked tulips, and wing base tulips.

Workflow

The spout's moderate, forgiving flow makes it a practical choice for baristas at a beginner-plus skill level who are building pattern control. It also gives more experienced baristas a dependable option for small-format service pours where consistency matters more than flow rate.

Specifications

What's included

– 1 x 10oz Latte Art Pitcher with Wide Spout in Matte Black.

Care & maintenance

Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to keep the matte black finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk's acidity can wear down stainless steel's protective layer over time if residue is left to sit.

Frequently asked questions

What size drinks is this pitcher designed for?

The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.

What spout does this pitcher use, and what patterns does it support?

It uses the WPM #06 round spout from WPM's Push and Flow, Service Pour series. At this volume, it suits hearts, stacked tulips, and wing base tulips.

Is this pitcher suitable for beginners?

Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for learning pattern control before moving to narrower or wider spout profiles.

Does the wider body diameter affect steaming?

Yes. The wider diameter relative to the 10oz capacity gives milk more room to move during steaming, which supports smoother microfoam despite the pitcher's compact size.

How should I clean and maintain the finish?

Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte black exterior.

The 10oz Latte Art Pitcher with Wide Spout in Matte Black brings WPM's proven slanted top design to a compact, cup-matched size. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small-format pours in daily service or while building pattern control.

The WPM 10oz Latte Art Pitcher with Narrow Spout in Matte Black is built for small format espresso drinks that call for precise pour placement. Its narrow #07 spout slows the flow rate just enough to give baristas fine control when working in cups under 6oz. The matte black finish and wide-diameter body make it equally suited to daily service and focused practice sessions.

Why you'll love it

- Narrow #07 spout profile reduces flow rate for precise placement in small cups.

- WPM's signature slanted top design directs milk to a single exit point for consistent pours.

- Wide-diameter body holds a full 10oz for proper steaming without volume constraints.

- Full loop handle accommodates multiple grip positions during the pour.

- Matte black powder coated exterior resists visible wear during regular use.

- Uncoated 304 18/8 stainless steel interior keeps the pitcher food safe and easy to clean.

Recommended for

- Macchiatos, cortados, and piccolo lattes served under 6oz.

- Baristas learning controlled pour placement on small format drinks.

- Fine line latte art patterns that depend on a steady, focused stream.

- Cafe service where consistency across small drinks matters.

Design philosophy

WPM designed the Model #27, known as the Small Blankenburg, specifically for milk drinks under 6oz. Rather than scaling down a larger pitcher, WPM paired a 10oz body with its narrow #07 spout so the flow rate matches the smaller pour target. This keeps the milk stream controlled instead of overwhelming a small cup.

The wide-diameter shape preserves enough interior volume for proper steaming even at this smaller capacity. Combined with WPM's slanted top, the result is a pitcher built around the specific demands of small format espresso drinks rather than a general-purpose design shrunk to fit.

Design features

WPM #07 narrow spout

The #07 spout has a narrow, lipped profile that reduces flow rate at the pour point. This gives baristas more time to react and adjust placement, which matters most when working with the limited surface area of a cup under 6oz.

Signature slanted top

WPM's slanted top design angles the pour edge instead of using a flat rim, directing the milk stream to a single exit point. This produces a more consistent stream shape from pour to pour, which supports repeatable pattern work.

Wide-diameter body

The body is wide relative to its 10oz capacity, which gives the pitcher enough interior room to steam properly without being constrained by a taller, narrower shape. This helps maintain steaming consistency even at the smaller volume.

Full loop handle

The full loop handle is sized to accommodate different grip positions, letting baristas adjust their hold as needed without losing control of the pour.

Performance

Pouring characteristics

The narrow #07 spout reduces flow rate compared to a wide or round spout, giving the barista more control over exactly where the milk lands. This makes it easier to build fine lines and maintain clean pattern edges.

Recommended drink sizes

The 10oz (300ml) capacity is sized for drinks under 6oz, including macchiatos, cortados, and piccolo lattes. At this size, the reduced flow rate of the narrow spout suits smaller volumes where placement accuracy matters more than pour speed.

Suitable patterns

The controlled, focused flow works well for ripple hearts, traditional rosettas, wing base tulips, hanging hearts, and swans. The steady stream also makes pour placement approachable for beginners while still supporting the precision needed as skill develops.

Specifications

What's included

- 1 x WPM 10oz Latte Art Pitcher with Narrow Spout in Black.

Care & maintenance

Hand wash with warm water and mild soap after each use, paying close attention to the interior where milk residue builds up. Dry the pitcher fully with a towel and store it right side up to prevent water spots. Avoid prolonged exposure to acidic milk residue, since this can wear down the protective layer on stainless steel over time.

Frequently asked questions

What cup sizes is this pitcher designed for?

It is designed for drinks under 6oz, including macchiatos, cortados, and piccolo lattes.

Why does the narrow spout matter at this size?

The narrow #07 spout reduces flow rate, giving more precise control over pour placement in a smaller cup than a wide or round spout would allow.

Is this pitcher suitable for beginners?

Yes. The steady, focused flow makes pour placement easier to learn, and it continues to support precision as pouring skill develops.

What is the exterior finish and does it affect performance?

The exterior is a matte black powder coating. It does not affect pouring performance and is intended to maintain a clean appearance during regular use.

A narrow spout latte art pitcher in brushed silver stainless steel, sized for small milk based drinks and detailed pour placement. The 10oz Latte Art Pitcher with Narrow Spout in Brushed Silver pairs WPM's signature slanted top with a compact, wide-diameter body, giving baristas a practical tool for cortados, piccolo lattes, Gibraltars, and macchiatos where fine line control matters more than volume.

Built on WPM's Model #27 pitcher body, this brushed silver edition leaves both the interior and exterior of the 304 (18/8) stainless steel uncoated. The result is a pitcher with a clean, commercial-grade finish that holds up to repeated daily washing without a coating to wear down.

WHY YOU'LL LOVE IT

- Compact 10oz body sized for cortado, piccolo latte, Gibraltar, and macchiato pours.

- Narrow spout profile slows the flow rate at the pour point for finer line control.

- Signature slanted top brings the milk stream closer to the crema surface, reducing the tilt needed to start a pour.

- Wide body diameter supports easier steaming and milk texturing despite the pitcher's compact size.

- Full handle accommodates multiple grip styles for comfort and stability.

- Uncoated 304 stainless steel interior and exterior resists the wear that powder-coated finishes can show over time.

RECOMMENDED FOR

- Cortado, piccolo latte, Gibraltar, and macchiato service.

- Fine line milk placement in small-format pours.

- Rosettas, stacked tulips, wing base tulips, and combination patterns.

- Baristas building precision pattern control before moving to wider spout profiles.

- Home baristas making single-shot milk drinks.

DESIGN PHILOSOPHY

This pitcher reflects WPM's long-standing approach to latte art equipment: pair a reliable, well-tested body with a spout profile matched to a specific pour volume and finish suited to daily commercial use. The Model #27 body is built around drinks served under 6oz, where a smaller pitcher keeps steamed milk volume matched to the cup instead of leaving excess milk after the pour.

The brushed silver finish leaves the 304 stainless steel uncoated on both the interior and exterior. Rather than adding a powder coat for color, this edition keeps the pitcher in its bare metal state, which suits busy commercial bars where a pitcher goes through frequent washing and handling.

DESIGN FEATURES

NARROW SPOUT

The narrow spout profile reduces the flow rate at the pour point, giving the barista more time and control when placing milk into a small cup. This makes it a practical choice for fine line work such as rosettas and stacked tulips, where precision matters more than speed.

SIGNATURE SLANTED TOP

The slanted top is original to WPM's pitcher design and angles the pour edge toward a single exit point rather than keeping it flat. This directs the milk stream closer to the crema surface sooner, reducing the tilt needed to start the pour and supporting finer detail work.

WIDE BODY DIAMETER

Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even in a pitcher sized for small pours.

FULL HANDLE

The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from the initial tilt to the final finishing lines.

BRUSHED SILVER STAINLESS STEEL FINISH

The pitcher is built from 304 (18/8) food-grade stainless steel that is left uncoated on both the interior and exterior. Without a powder coat, the brushed finish is well suited to commercial environments where pitchers see frequent handling and washing.

PERFORMANCE

RECOMMENDED DRINK SIZES

The 10oz (300ml) capacity is sized for cups under 6oz, including cortado, piccolo latte, Gibraltar, and macchiato. This keeps the milk volume matched to the cup, avoiding excess steamed milk left over after the pour.

POURING CHARACTERISTICS

The narrow spout produces a controlled, reduced flow rate that favors fine line placement over speed. Combined with the slanted top, this supports precise detail work at small pour volumes, including rosettas, stacked tulips, and wing base tulips.

WORKFLOW

The narrow spout's slower, more deliberate flow makes it a practical option for baristas building pattern control on small-format drinks. It also gives more experienced baristas a dependable tool for detailed service pours where line quality matters more than flow rate.

SPECIFICATIONS

WHAT'S INCLUDED

- 1 x 10oz Latte Art Pitcher with Narrow Spout in Brushed Silver.

CARE & MAINTENANCE

Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to prevent water spots on the uncoated stainless steel. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk's acidity can wear down stainless steel's protective layer over time if residue is left to sit.

FREQUENTLY ASKED QUESTIONS

WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?

The 10oz (300ml) capacity is designed for cups under 6oz, such as cortado, piccolo latte, Gibraltar, and macchiato.

WHAT MAKES THE NARROW SPOUT DIFFERENT FROM A ROUND OR WIDE SPOUT?

The narrow spout reduces the flow rate at the pour point, giving more time and control for fine line patterns like rosettas and stacked tulips, compared to the faster flow of a round or wide spout.

IS THIS PITCHER SUITABLE FOR BEGINNERS?

Yes, though its narrow spout and slower flow are especially useful for baristas working on fine line detail. Baristas newer to latte art may find a round spout more forgiving before moving to a narrow profile.

WHY IS THE EXTERIOR UNCOATED INSTEAD OF POWDER COATED?

The brushed silver finish leaves the 304 stainless steel bare on both the interior and exterior. This gives the pitcher a commercial-grade finish that holds up to frequent washing without a coating to wear down over time.

HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?

Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect the stainless steel surface.

The 10oz Latte Art Pitcher with Narrow Spout in Brushed Silver brings WPM's proven slanted top design to a compact, cup-matched size. Between the controlled flow of the narrow spout and the wider body diameter, it gives baristas a dependable tool for fine line pours in daily commercial service or while building pattern control.

This listing is for 6oz latte cup and saucer in the same color (1 cup and 1 saucer). 

Origami Porcelain cups are high density Mino-ware products that are fired for 12 hours under 2750˚F. The result is a durable product with high heat retaining properties.

All Origami products are designed with usage and comfort in mind - from flow dynamics to lip contact, the ORIGAMI team conducts extensive research on the shape of the vessel as well as thickness of the side walls. The result is the ultimate design to maximize the enjoyment from pouring to serving.