SHOP NEWEST PRODUCTS

Hold Fast right side up, Pour Slow turned over: a sailor's steadiness, brought to the espresso bar.

There's a moment right before a pour starts, when the espresso has settled and the milk is ready, where everything about the art still comes down to the angle of the wrist. Get too close too soon and the crema breaks apart. Hold back too long and the lines blur before they ever form. The SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher was built for that exact window: a milk pitcher for pouring lattes, cappuccinos, and other espresso-based drinks, shaped with a slanted rim and round spout, in the "Hold Fast Pour Slow" design, so you can work close to the surface without losing control of the pour.

A Phrase Born at Sea

Hold Fast is old sailor language, once inked across the knuckles of dockhands as a reminder to grip steady when the water turned rough. It carries that same idea here: stay grounded, stay resilient, hold onto what matters even as everything else moves.

Pour Slow is the other half, and it doubles as a quiet nod to Slow Pour Supply. In coffee, it means precision and patience. In everything else, it means the same thing: move with care, savor the process, and let the small, deliberate moments count.

Matthew Tabor, Art Director of the Houston design studio Letterset, translated that balance of strength and softness into a single piece of turnabout lettering. Read right side up, it says Hold Fast. Turn the pitcher over, and the same lines resolve into Pour Slow. It's drawn in a seafarer style that borrows from the hand-painted plaques and ropework you'd find on an old ship's wheel, the same tradition Letterset works in through its sign painting. Read one way, it's a grip. Read the other, it's a reminder.

That same care carries into how the pitcher pours. WPM, the pitcher's manufacturer, built the slanted rim to set a defined exit angle for the milk, letting it tilt more horizontally and bring the spout within about a centimeter of the espresso before anything starts to flow. Poured this way, the contact between milk and espresso is less abrupt, and the resulting art holds brighter whites against deeper crema.

Product Details

The Pitcher and Spout

The body holds 15 oz (450 mL), sized for the 6 to 8 oz pours common to lattes and cappuccinos. An internal marking at the 6 oz line gives a consistent fill point every time, so the milk-to-espresso ratio stays steady from one drink to the next. The handle wraps fully around the base, shaped to sit comfortably across grip styles and hold steady through a long pour.

What's in the Box

SLOW POUR SUPPLY® x WPM 15oz Round Spout Latte Art Pitcher, "Hold Fast Pour Slow"  x 1

The Round Spout

Slanted Top: Sets a defined exit angle for the milk, letting the pitcher tilt further before the pour begins.

Round #06 Profile: Shaped for a medium line width, tuned for crisp rosettas, tulips, and hearts.

The Lettering

Turnabout Type: One design, two readings: right side up it reads "Hold Fast," turn the pitcher over and it reads "Pour Slow."

Seafarer Style: Hand-drawn lettering that nods to ship plaques and dockside signage, the same tradition the phrase itself comes from.

Hand-Painted Heritage: Drawn by Matthew Tabor of Letterset, a Houston studio that still practices traditional sign painting.

Weight: 235g

Material: Food-grade 304 (18/8) stainless steel

A collaborative release with Tokyo's LIWEI Coffee Stand, this limited edition pitcher is designed for both the working barista and the dedicated coffee enthusiast. Its round spout geometry produces softer, rounder line work and supports a more rapid flow rate, making it well-suited for free-flowing designs that require speed and fluidity in execution.

The slanted top design integrates dual volume indicators at 180 and 240 mL, enabling consistent milk-to-espresso ratio management across drink formats without interrupting workflow. The full handle accommodates a wide range of grip positions, maintaining comfort and stability throughout extended use.

Constructed from 304 18/8 stainless steel, the pitcher is built for long-term durability under daily service conditions.

Specifications

• Spout round-tip profile, optimized for soft-line technique and rapid pour rate
• Volume indicators two-point engraved scale at 180 / 240 mL
• Handle full-grip construction, compatible with multiple hand positions
• Material 304 18/8 stainless steel, uncoated food-safe interior
• Finish available in Navy Blue or Brushed Steel
• Edition limited release

The WPM 15oz Round Spout Latte Art Pitcher in Gloss White, “Latte Art with a Soul,” pairs WPM’s #06 round spout and slanted top with a gloss white body and a skull-and-lightning illustration. It is a milk pitcher sized for 6 to 8oz drinks, the range that covers flat whites, small lattes, and cappuccinos.

The Story Behind “Latte Art with a Soul”

Latte art usually gets talked about in terms of symmetry, contrast, and line definition. Anyone who has poured through a morning rush knows there is more to it than that. The name “Latte Art with a Soul” points at the part you cannot measure: the barista behind the pitcher, and the hundreds of practice pours that show up in a clean rosetta at 7am.

The illustration reads like a sheet of tattoo flash pinned up behind the bar. A black skull, drawn in profile with its jaw wide open, is the latte artist at full volume. White lightning bolts cut across the crown, the charge that hits when a pour finally comes together. A nail is driven into the side of the skull, a nod to the shorthand every barista knows for a pattern that lands exactly as planned: you nailed it.

Beneath the jaw, a single yellow bolt is the only color on the pitcher, set against bold black linework and the gloss white body. “LATTE ARTIST” runs horizontally beside the skull, so the pitcher says plainly who it was dedicated for.

How the #06 Round Spout Shapes Your Lines

The #06 is WPM’s round-profile spout. It lays down a medium-width ribbon of milk at a moderate, consistent flow rate, between #07 narrow spout #22 wide. A versatile spout for patterns like solid and ripple hearts, rosettas, stacked tulips, wing-base tulips, and swans.

Featuring original WPM slanted top design. The rim is angled rather than flat, which sets a defined exit point for the milk and lets you tilt the pitcher closer to horizontal before the pour begins. When it is time to draw, the spout can sit about a centimeter above the surface.

Pouring that close makes the first contact between milk and crema less abrupt. The microfoam rides on top instead of diving, so the pattern sets with brighter whites against a deeper brown base.

WPM pitchers are a regular sight on the competition stage, used by national latte art champions, barista champions, and Coffee Fest Latte Art World Championship Open winners.

Product Details

Steaming and Pouring with the 15oz

Fill to the 6oz indent on the interior wall before you steam. That volume leaves room for a short stretch to build air and a longer roll to polish it into glossy microfoam, without the milk climbing the spout as it expands. Starting from the same line each time keeps foam depth and the milk-to-espresso ratio repeatable from drink to drink.

The full handle wraps around the back of the body, so it holds securely whether you pinch high near the rim or grip lower for more leverage on the tilt.

Slow Pour Supply pairs the 15oz round spout pitcher with ORIGAMI latte bowls in its Barista Latte Art Sets, including the ORIGAMI Latte Bowl with Saucer Set (10oz).

The Spout and Body

•     #06 round spout: A medium line width at a moderate, consistent flow, for hearts, rosettas, and tulips with clean definition.

•     Slanted top: The angled rim lets the pitcher tilt further before milk exits, bringing the spout within about 1cm of the crema.

•     6oz volume indent: An internal marking for a measured fill, sized for 6 to 8oz cups.

What’s in the Box

•     Pitcher: WPM 15oz Round Spout Latte Art Pitcher in Gloss White, “Latte Art with a Soul” x 1

Specifications