April Hybrid Brewer - option to add April Large Filters
Regular price $114.00 Save $-114.00Seeking simplicity in the coffee brewing methodology, Patrik developed the hybrid brewer to find a way to have delicious coffee with a simply yet effective brewing method. Pair with the April Large Wave filters for a simple brew.
The April Brewer merges the best aspects of both immersion and drip brewing techniques. By combining these methods, the brewer offers versatility and a unique brewing experience, allowing users to experiment with different approaches to coffee preparation.
Using a flat bottom brew bed approach as a basis, the brewer is made from selected materials that not only ensure durability but also contribute to a consistent and repeatable brewing process. Its flatbed design is one of the standout features, as it promotes even water distribution over the coffee grounds. This helps achieve consistent extraction, which is key to making the brewer process repeatable. Highlighting sweetness and clarity, this consistent extraction process makes the brewer well-suited for commercial use.
Another advantage of the April Hybrid Brewer is its flexibility. Whether you’re brewing a single cup, preparing multiple servings, or wanting to use as a cupping device, the April Hybrid Brewer is designed to adapt to different volumes, making it equally effective for both personal use and sharing. Moreover, the brewer is approachable and easy to use, which opens up a wide range of brewing possibilities. This adaptability makes it an excellent choice for anyone from beginners who are just learning the basics of coffee brewing to seasoned baristas looking to fine-tune their craft.
Adding to its practicality, the April Hybrid Brewer is optimized for use with large April paper filters developed by April Coffee Roasters.
In essence, the April Hybrid Brewer strikes a balance between simplicity and performance, making it an ideal tool for coffee enthusiasts who value both ease of use and high-quality results.
Watch the video to get some recipe inspiration!
Material: Glass, Silicone, Plastic, and Metal
Style: Flat Bed - Immersion
Cup Profile: Sweet & Round
Color(s): Orange and Pink
Made in: Indonesia
Paper Filters: April Paper Filters L
Years in development, we are excited to make this immersion - drip hybrid brewer available to the US market.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Difluid R2 Extract TDS Meter
Regular price $229.00 Save $-229.00There's a certain satisfaction in knowing your coffee is doing exactly what you think it is. Not guessing. Not approximating. Knowing. The Difluid R2 Extract is built for that kind of certainty.
The R2 Extract measures total dissolved solids (TDS) in your brew — quickly, accurately, and without the fuss of traditional refractometers. Pair it with CoffeeOS and it goes further: logging your brews automatically, calculating extraction yield in real time, and mapping results directly onto the Brew Control Chart. The data you've always wanted, finally in a format that actually helps you act on it.
Most refractometers are delicate instruments built around a small sensor vulnerable to ambient light — requiring a lid, careful handling, and a fair amount of patience. The R2 Extract takes a different approach. Its larger CMOS sensor dramatically reduces the influence of external light, making it more accurate, more durable, and lid-free by design. It connects via Bluetooth and lives inside your workflow, not outside of it.
With a TDS range of 0–30%, the R2 Extract handles everything from a delicate filter to a concentrated espresso shot. For espresso, a quick filter before measuring keeps oils from interfering — though even unfiltered, the oversized sensor produces results that are notably more accurate than what you'd expect from conventional tools.
Calibration is equally straightforward: use distilled water for absolute comparability across setups, or your actual brew water for the most precise extraction calculations.
Whether you're dialing in at a café, developing a new roast, or simply trying to brew the same great cup twice — the R2 Extract gives you the feedback loop to make it happen. Repeatable results aren't an accident. They're a practice.
For calibrating your R2 TDS meter, use distilled or RO water to set the calibration to zero.
For understanding your brew TDS, also measure your water TDS to compare. To dial in your water, we recommend using our Apax Lab Mineral Concentrates.
Pairs with CoffeeOS. Works with filter and espresso. Bluetooth connected.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
SOLO Silicone Ring for Solo Drippers
Regular price $10.75 Save $-10.75Solo Silicone Ring is designed to be used for Solo Drippers, the the brewer component of the Solo Spin.
The semi-rigid silicone material is easy to attach to your Solo Spin, converting it from a hybrid to a pourover brewer.
Mix and Match your colors with Solo Spin and Solo Dripper!
Available in 3 colors. Mix and match to show your personality!
Dishwasher Friendly
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Timemore Icicle Cold Brewer
Regular price $33.00 Save $-33.00Cold brewing asks very little of you. Set it up, tuck it away, and let time do the work. The Icicle Cold Brewer is built for that rhythm: a geometric borosilicate glass vessel that quietly steeps tea, fruit infusions, or coffee overnight, ready to pour the moment you reach for it.
Made from borosilicate glass, it is light in the hand and resistant to thermal shock, moving from a cold fridge to a warm countertop without complaint. The frosted body gives you a confident, stable grip even as condensation forms on the outside.
The detail that sets the Timemore Icicle apart is in its filter. The über-long PP food-grade 300-mesh filter extends all the way to the base of the brewer, drawing flavour evenly from the full depth of your grounds, leaves, or fruit rather than just the top layer. At 300 mesh, it is fine enough to keep sediment out while remaining easy to clean. It is a quiet design decision that makes a real difference in the cup.
The lid of the Timemore Icicle Cold Brewer assembly layers a silicone-sealed bottle lid with a stainless steel top cap, creating a leakproof seal reliable enough to lay the brewer flat in the fridge or carry it on its side without a second thought. When you are ready to pour, a simple twist and lift is all it takes. No drips, no fumbling.
The Icicle Cold Brewer holds 600ml and brews cold brew coffee with as little as 30g of grounds, making it efficient as well as beautiful. It is available in two colourways: a clear frosted White with a stainless steel cap, and a smoked Black with a matte black finish.
The Timemore Icicle Cold Brewer has a tapered geometric form, wide at the base and narrow at the neck, with a frosted glass body that sits confidently on any surface. Embossed tick marks on the side indicate approximate fill levels at 300ml, 400ml, and 500ml, making it easy to calibrate your brew ratio without measuring equipment. The filter assembly screws into the neck and descends the full length of the body, ensuring even contact between water and grounds from top to bottom.
• Timemore Icicle Cold Brewer (borosilicate glass body, PP 300-mesh filter, full lid assembly)
• Manual, Warranty card, Certificate
• Full-length reach: PP food-grade 300-mesh filter extends to the base for thorough, even extraction
• Versatile: Compatible with coffee grounds, loose-leaf tea, and fruit infusions
• Leakproof lid: Silicone-sealed assembly with stainless steel cap. Twist to seal, lift to pour
Weight: 370g
Dimensions: 80mm (W base) x 54mm (W top) x 260mm (H)
Capacity: 600ml (tick marks at 300ml, 400ml, 500ml)
Material: Body: Borosilicate glass / Filter: Food-grade PP, 300 mesh / Lid assembly: PP, silicone, stainless steel, nylon
Care: TBC — confirm with supplier before publishing
Colourways: White (frosted glass, stainless steel cap), Black (smoked glass, matte black cap)
Coffee ratio: 30g ground coffee per brew (as indicated by brand)
In the box: Icicle Cold Brewer, Manual, Warranty, Certificate
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
All food safe material: PP, Silicon, Borosilicate Glass, Stainless steel
Weight: 360gram
Volume: 600ml
*Product includes user manual and brewing guide
DragonFly Design Center Conical Dripper Transit Base
Regular price $32.00 Save $-32.00A knob-controlled base for the DragonFly CT62 Transit Pro Dripper, letting it hold water for immersion or release it for drawdown
The Conical Dripper Transit Base from DragonFly Design Center is a knob-controlled base built for the DragonFly CT62 Transit Pro Dripper, available with a Black, White, Pink, or Purple knob. Turn the knob closed and the conical dripper becomes a full immersion brewer, holding the slurry for as long as your recipe calls for. Open it and the brew drains through the filter as a standard percolation pour over.
Setting the knob partway lets you meter the flow rate, so you can slow the drawdown without changing your grind size.
With the knob turned closed, water stays in contact with the grounds and extraction runs as immersion. Contact time is set by you, not by grind size and filter resistance. Turn the knob open and drawdown begins, finishing the brew as percolation, with water moving through the bed and the paper filter holding back fines and oils.
This makes hybrid recipes possible in a single brewer: a closed bloom for even saturation and degassing, an immersion phase to build body and extraction, then an open percolation finish for clarity. You can adjust the timing and balance of each phase on the fly, with no change to the dripper, filter, or grind.
The base comes apart in two sections joined by a magnetic connection, so it separates cleanly for rinsing and snaps back together for the next brew. Three feet keep it level on the server.
Set the CT62 Transit Pro Dripper on the base, place it over your server, and choose your starting configuration. With the knob closed, you control contact time directly. A closed bloom saturates the whole bed before any liquid drains, which reduces dry pockets and channeling and sets a foundation for even extraction.
With the knob open, the dripper behaves like a conventional conical pour over, and pour rate, pulse timing, and agitation drive the extraction.
The CT62 Transit Pro Dripper takes Size 02 conical paper filters.
• Knob control: A single knob opens and closes the flow path, moving between immersion and percolation mid-brew, with partial settings to adjust flow rate.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-controlled base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |

• Knob control: A single knob opens and closes the flow path, switching between immersion and drawdown mid-brew.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel (component breakdown TBC) |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-operated switch base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml)
Regular price $95.75 Save $-95.75A 62° conical dripper sized for 1- 4 cup, with an internal groove structure that keeps the drawdown steady at larger doses
The CT62 Dripper 02 (390ml) from DragonFly Design Center is a new bone china conical dripper made for a larger, 1-4 cup brew. It carries the 62° angle, internal grooves, and exterior texture of the original CT62, with a taller body that raises capacity from 1 to 2 servings to 1 to 4. It is available in Black and White.

The cone is set at 62°, a proprietary angle DragonFly developed to give a broad, stable extraction range. It responds well to a centered pour or a wider circular spiral pour, so you can adjust your technique without the brew losing balance.
Inside, 24 grooves guide water down the wall. Instead of the raised ribs found in many conical drippers, the CT62 uses recessed channels, with an added ring of horizontal grooves near the base to regulate flow through the lower part of the cone.
DragonFly refined this channel design through repeated testing. The goal is a drawdown that holds a consistent pace from start to finish, which helps reduce clogging and the bitterness, astringency, and sourness that come with uneven extraction.
Set the DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml) and you have instantly transformed it to a hybrid brewer with variable flow rate.
The dripper sits over a cup or server for standard pour over brewing. At 390ml, it handles 1 to 4 servings, so the same brewer works for a single morning cup or a shared pot. It takes 1-4 cup paper filters.
Its base has an integrated raised ring that seats into the DragonFly Conical Dripper Transit Base. It also pairs with the DragonFly Conical Dripper Holder and Silicone Ring for a more secure, stable setup on the brew table.
The new bone china body is heat resistant to 120°C (248°F) and safe for dishwashers, microwave ovens, and dish dryers.
• 62° conical geometry: A proprietary angle that gives a wide working range and room to vary pour style.
• 24 recessed channels: Guide water downward along the wall in place of raised ribs, for a steadier drawdown.
• Horizontal groove ring: Sits near the base and regulates flow through the lower cone as the bed settles.

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (Shanwen Jia) from China's Tang Dynasty. The 62 refers to the interior cone angle.
The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.
The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

• Dripper: DragonFly CT62 Dripper 02 (390ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
CT62 Dripper 02 (390ml) |
|
Weight |
250g net (415g gross, packaged) |
|
Dimensions |
119mm top diameter x 34mm bottom diameter x 92mm height |
|
Material |
New bone china (新骨瓷), matte glaze finish |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
390ml, 1 to 4 servings |
|
Filter |
V60 size 02, Sibarist Cone M, HIFLUX Folding V 02, ORIGAMI Cup4 paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Cone Angle |
62° |
|
Internal Structure |
24 grooves, recessed channels, horizontal groove ring near the base |
|
Designer |
Jeff Shi |
|
Compatible Accessories |
DragonFly Conical Dripper Transit Base · DragonFly Conical Dripper Holder and Silicone Ring |
|
Color |
Black, White |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center Bamboo Flat Dripper Holder with Silicone Ring
Regular price $24.00 Save $-24.00A bamboo holder and silicone ring that keep the Tri-Spin FS Flat Dripper seated level and steady on the vessel
The Bamboo Flat Dripper Holder from DragonFly Design Center is a four-petal bamboo base made for DragonFly’s flat-bottom dripper series, including the Tri-Spin FS Flat Dripper (280ml). Paired with the Tri-Spin FS Flat Dripper Silicone Ring, it gives the dripper a secure hold for an even flow.
The holder is shaped from bamboo into a four-petal outline with softened curves. Each of the four outward points is a gentle arc, so the holder can be picked up, placed, or adjusted from any side. Bamboo keeps it light on the table and warm to the touch.
Set the Tri-Spin FS Flat Dripper Silicone Ring securely in the bamboo the holder to form proper contact point to keeps the brewer aligned and cuts down on sliding and rocking.
![]()
Place the silicone ring in the center of the bamboo holder, then set the dripper into the ring. The holder is made for DragonFly’s flat-bottom dripper series and fits the DragonFly Design Center Tri-Spin FS Flat Dripper (280ml).
![]()
• Four-petal bamboo holder: Four outward points shaped with gentle arcs for handling from any side.
• Silicone ring: Seats the dripper at the center of the holder for a close, stable fit.
• Dedicated fit: Sized for DragonFly flat-bottom drippers, including the Tri-Spin FS Flat Dripper (280ml).
• Bamboo Flat Dripper Holder variant: DragonFly Bamboo Flat Dripper Holder x 1
• Silicone Ring variant: DragonFly Tri-Spin FS Flat Dripper Silicone Ring x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Bamboo Flat Dripper Holder |
|
Weight |
60grams (Gross) 43g (Net) |
|
Dimensions |
130mm x 130mm x 10mm |
|
Material |
Holder: bamboo |
|
Care |
Rinse after use, wipe gently, and keep dry. |
|
Origin |
Made in China |
|
Variants |
DragonFly Bamboo Flat Dripper Holder · DragonFly Tri-Spin FS Flat Dripper Silicone Ring |
|
Compatible Dripper |
DragonFly Design Center Tri-Spin FS Flat Dripper (280ml) |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center Bamboo Conical Dripper Holder with Silicone Ring
Regular price $20.50 Save $-20.50A bamboo holder and silicone ring that keep the DragonFly conical dripper level and steady while you pour
A conical dripper does its best work when it sits level and stays put. If it shifts on the server as the kettle stream hits the bed, the slurry tilts and water favors one side of the cone.
The Bamboo Conical Dripper Holder from DragonFly Design Center is a flat bamboo base made for the DragonFly CT62 / SA62 Conical Dripper. With the DragonFly CT62 / SA62 Dripper Silicone Ring fitted in its center, it rests between dripper and server and holds the dripper steady through the brew.
The setup has two parts, each with its own job. The bamboo holder is the frame, and the CT62 / SA62 silicone ring sits inside it as the contact point for the dripper.
The ring is shaped to match the texture of the dripper's outer wall. Once the dripper is seated, it stays balanced in the ring instead of resting on a hard, fixed edge, and the silicone adds grip where contact matters most.
The outline of the holder is based on the traditional shanwenjia motif. One corner extends into a point that works as a handle, so you can lift and reposition the holder with three fingers.
Bamboo keeps the piece light and gives it a visible natural grain.
Fit the silicone ring into the center of the bamboo holder, rest the holder on your server, then seat the DragonFly Conical Dripper in the ring.
Both pieces are available as options on this page. The complete setup uses the holder as the frame and the ring as the fitted seat for the dripper.
• Bamboo holder: Lightweight bamboo with a natural grain finish, shaped with an extended corner for lifting.
• CT62 / SA62 silicone ring: Matches the texture of the dripper's outer wall to keep it seated and balanced.
• Food-contact silicone: Conforms to GB4806.11-2016, China's national food safety standard for rubber materials in food contact.
• Holder option: DragonFly Bamboo Conical Dripper Holder x 1
• Silicone ring option:
DragonFly CT62 Dripper Silicone Ring x 1
or
DragonFly SA62 Dripper Silicone Ring
|
Brand |
DragonFly Design Center |
|
Product Name |
Bamboo Conical Dripper Holder |
|
Weight |
46g net (63g gross, packaged) |
|
Dimensions |
114mm (W) x 129mm (D) x 10mm (H) |
|
Material |
Holder: bamboo. Silicone ring: food-grade silicone, conforming to GB4806.11-2016. |
|
Care |
Rinse with water after use, wipe with a soft cloth, and keep dry. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 / SA62 Conical Dripper |
|
Paired Component |
DragonFly CT62 / SA62 Dripper Silicone Ring |
|
Options |
CT62 Dripper Silicone Ring / SA62 Dripper Silicone Ring |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center 220 Flat-Bottom Paper Filter - 50 sheets
Regular price $14.25 Save $-14.25A 32gsm flat-bottom, 1-4 cup paper filter shaped for the DragonFly Tri-Spin FS Flat Dripper (390ml), for greater consistency with a deeper brew bed
The DragonFly 220 Flat-Bottom Paper Filter from DragonFly Design Center is a 32gsm virgin wood pulp filter made specifically for the DragonFly Tri-Spin FS Flat Dripper (390ml). Its pleated, cake-style form opens into a broad flat base matched to the dripper’s geometry, so the coffee bed builds deeper and more uniformly for consistent percolation. Each pack holds 50 filters.
The filter is designed to the specifications of 390ml Tri-Spin FS. The dripper’s 20 raised ribs hold the pleated walls in shape so the paper does not collapse against the brewer wall, while the flat base sits over the Tri-Spin hollowed base, which distributes outflow across several exit points instead of one central orifice.
With the paper seated evenly, the bed settles at a consistent depth and the water meets the same resistance on each brew. Flow rate and contact time stay repeatable, so when total brew time or extraction shifts, you can trace it to grind size, dose, or pour structure rather than the filter.
A deeper bed also lengthens the path water takes through the coffee, which extends contact time during percolation and supports a fuller extraction at a given grind setting.
Pre-wet the paper with hot water to seat it against the ribs and preheat the brewer, then discard the rinse water before dosing. You can do so by first adding a small amount directly to the center of the filter to set the base even. As the water moves up towards to folds, add more water in spiral motion to thoroughly rinse the paper.
Level the bed before the bloom for an even drawdown. Switch open for percolation, or switch closed for a full immersion steep before drawdown.
DragonFly Tri-Spin FS Flat Dripper (390ml).

• Basis weight: 32gsm virgin wood pulp paper.
• Shape: Pleated, cake-style flat-bottom form matched to the Tri-Spin FS Flat Dripper (390ml).
• Food contact: Specified for direct and aqueous food contact, listed against GB 4806.1-2016, GB 4806.8-2022, GB 9685-2016, and GB 31603-2015.
Keep the box at room temperature in a dry place, away from direct light and strong odors. Stored this way, the filters have a shelf life of five years.
• Filters: DragonFly 220 Flat-Bottom Paper Filter x 50, boxed
|
Brand |
DragonFly Design Center |
|
Product Name |
220 Flat-Bottom Paper Filter |
|
Weight |
105.5 gram |
|
Dimensions |
4 x 4 x 5.5 inches |
|
Material |
Virgin wood pulp paper, 32gsm |
|
Care |
Store at room temperature in a dry place. Keep away from light and strong odors. |
|
Origin |
Made in China |
|
Paper Weight |
32gsm |
|
Quantity |
50 filters per pack |
|
Shape |
Flat-bottom, pleated cake-style |
|
Compatibility |
DragonFly Tri-Spin FS Flat Dripper (390ml) |
|
Shelf Life |
5 years |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Tri-Spin CT Flat Bottom Dripper - 255ml
Regular price $55.75 Save $-55.75The Tri-Spin CT Flat Dripper from DragonFly Design Center is a new bone china flat-bottom pour over dripper built to close that gap. It starts from the CT62 conical dripper and rebuilds it around a flat bottom, with a grooved inner wall and DragonFly's Tri-Spin base.
The inner wall is a flat surface cut with 12 long grooves and 12 short grooves. The filter paper adheres to a larger area of the wall, so there is less room for water to bypass the bed and more of each pour passes through the grounds.
The grooves act as flow guides and pressure relief channels, which keeps the drawdown smooth and the extraction even across the bed. The result is a even extracted cup with clear layers of sensory expression.
At the base, the Tri-Spin hollowed design with multiple grooves spreads the water's exit points to avoid concentration in the center. This reduces the risk of the clogging and helps water move through the whole bed. This matters even more with larger doses, where localized over-extraction is more likely.
DragonFly developed the CT Flat with competition brewing in mind, where a stable, repeatable extraction counts for more than speed.

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.
The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Paired with the DragonFly Flat-Bottom Transit Base, the dripper brews two ways. With the transit knob open, it runs as a flat-bottom pour over and gives a clean, filter-style cup. With the switch closed gives a fuller, immersion-style cup.
You can also choose to brew with a Bamboo Flat Dripper Holder – using it as a traditional pourover dripper.
It holds 255ml, brews 1 to 2 servings, and takes foldable flat-bottom filter paper or 185 flat-bottom paper filters.
• Groove structure: Twelve long and twelve short grooves on a flat inner wall let the filter sit closer to the wall while still guiding flow and relieving pressure.
• Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

• Dripper: DragonFly Tri-Spin CT Flat Dripper (255ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin CT Flat Dripper (255ml) |
|
Weight |
221g net (324g gross, packaged) |
|
Dimensions |
110mm top diameter x 60mm bottom diameter x 75mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
255ml, 1 to 2 servings |
|
Filter |
Foldable flat-bottom filter paper or 185 flat-bottom paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Compatible Accessories |
DragonFly Flat-Bottom Switch Base · DragonFly Flat-Bottom Bamboo Dripper Holder |
|
Color |
Black, White |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml
Regular price $55.75 Save $-55.75A flat-bottom pour over drains evenly when the coffee bed stays level and water can exit across the whole base. Uneven flow usually starts where the filter meets the brewer: the paper folds against the wall, fines collect in the center, and the middle of the bed slows while the edges drain through.
The Tri-Spin FS Flat Dripper from DragonFly Design Center, also known by its Chinese name 三旋空玄武 (Xuanwu), is a new bone china flat-bottom brewer designed to keep that flow even. Its transit base lets you brew as a standard pour over, or close the knob and steep as an immersion.
Inside the dripper, 20 raised ribs hold the filter paper off the wall so it keeps its shape through the brew. With the paper supported, water moves through the bed at a more consistent rate, and results vary less from one brew to the next.
The wall angle is set to keep the flow rate quick while still allowing a finer grind. A finer grind raises extraction yield, so a faster drawdown can still reach a full extraction and keep a clear, layered flavor.
At the base, DragonFly's Tri-Spin hollowed design spreads the water's exit points across the base rather than concentrating them in the center. This reduces clogging and keeps water moving through the whole bed instead of stalling in the middle, which matters most at larger doses where localized over-extraction is more likely.

The dripper received a German Design Award in 2026.
The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.
The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

With the Transit Base open, it brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the switch closed, water stays in contact with the grounds until you open it, which gives a fuller, immersion-style cup.
Immersion is a forgiving starting point while your pour technique is still developing. The open setting gives experienced brewers direct control over pour rhythm and timing.

You can also choose to brew with a Bamboo Dripper Holder – using it as a traditional pourover dripper.
DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml brews 1 to 2 servings, and takes 185 flat-bottom paper filters. It is available in Shell Pink, Black, and White.
• Rib structure: Twenty raised internal ribs support the filter paper and hold its shape through the brew.
• Tri-Spin hollowed base: Spreads the outflow across the base instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
• Dripper: DragonFly Tri-Spin FS Flat Dripper (280ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin FS Flat Dripper (280ml) |
|
Weight |
210g net (340g gross, packaged) |
|
Dimensions |
104mm top diameter x 60mm bottom diameter x 77mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
China |
|
Capacity |
280ml, 1 to 2 servings |
|
Filter |
185 flat-bottom paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Award |
German Design Award 2026 |
|
Color |
Shell Pink, Black, White |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center SA62 Saddle Dripper
Regular price $72.75 Save $-72.75Coming soon 10.9.26 - sign up for notification
A 62° conical bone china dripper with coral-pattern grooves, built for a quick, even drawdown for 1-2 Cup brew.
The SA62 Saddle Dripper from DragonFly Design Center is a new bone china conical dripper with a 62° wall angle and a grooved interior designed. It brews 1-2 cups with small conical filters and comes in Lilac, Grey, and Black.
Inside the SA62 Saddle Dripper, twelve long grooves run from the rim down to the outlet, evenly spaced around the wall. Eight shorter, curved grooves branch off them in a coral-like pattern, an original DragonFly design.

The groove pattern gives water more channels along the wall and toward the outlet. DragonFly designed it to speed up the flow rate and support an efficient extraction.
At the base, a ring lets the dripper sit on the DragonFly Transit Switch Base, so the same brewer can easily switch between a standard pour over and a hybrid setup.
For pourover, choose the DragonFly Bamboo Conical Dripper Holder with SA62 Silicone Ring for a traditional pourover and a snug fit.
The outer wall carries a repeating raised relief based on the saddle shape found in Tang Dynasty tri-color pottery (sancai): full, three-dimensional, and slightly upturned at the edges.
DragonFly arranges the relief in a regular pattern using a contemporary design language. It references the horse and saddle figures of Tang Dynasty ceramics, and marks 2026 as the Year of the Horse.

It takes Conical 01 and 02 size cone paper filters. Compatible with ORIGAMI 2Cup, Hiflux
High Fast Folding V01, and Sibarist Cone S.
Used on its own, it brews as a fast-flowing cone. Set on the Transit Switch Base, it pairs with DragonFly's switch system for more control over when the brew drains.
• Coral-pattern grooves: Twelve long grooves run top to bottom, with eight curved short grooves branching from them to speed up flow.
• 62° cone: The wall angle sets the shape of the coffee bed and fits standard V60 01 and 02 filters.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
• Dripper: DragonFly SA62 Saddle Dripper x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
SA62 Saddle Dripper |
|
Weight |
216g net (316g gross, packaged) |
|
Dimensions |
112mm top diameter x 34mm bottom diameter x 73mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 servings |
|
Filter |
Hario V60 01 or 02 paper filter |
|
Wall Angle |
62° |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Compatible Base |
DragonFly Transit Switch Base |
|
Color |
Lilac, Gray, Black |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
DragonFly Design Center “Caisson Ceiling” CC62 Dripper (with CT62 Groove)
Regular price $50.00 Save $-50.00Coming soon - sign up for notification
A 62° conical dripper with carved guide grooves, built to hold a steady drawdown from bloom to finish
On a small-dose cone, balance depends on how evenly the slurry drains. Water that bypasses the bed, or a flow that chokes near the outlet, pulls the cup toward under- or over-extraction.
The “Caisson Ceiling” CC62 Dripper from DragonFly Design Center is a new bone china conical dripper built on the CT62 interior, pairing a 62° cone with recessed guide grooves to keep the flow rate consistent through the brew. It brews 1-2 cups with small conical filters and comes in Pink and Green.
At 62°, the cone wall holds the paper in close contact, limiting bypass so the water you pour travels through the coffee bed rather than around it.
Where most conical drippers use raised ribs, the CC62 carves its channels into the wall. Water runs down these recessed longitudinal grooves, and a ring of channels at the base meters the outflow at the bottom of the cone.
The placement of that ring of channels, together with the shape and depth of the bottom cross-section, governs the final stage of the brew, when the bed settles toward the outlet. The result is a flow rate that neither rushes early nor stalls late, avoiding the bitterness and astringency of over-extraction and the sharp sourness of under-extraction.
It takes 1 to 2 cup cone filters, including ORIGAMI 1-2 cup filters, Sibarist Cone S, and Hiflux Folding V 01.
The new bone china body is heat resistant to 120°C (248°F) and dishwasher safe.
• 62° cone: Shared with the CT62, holding the paper close to the wall.
• Recessed longitudinal grooves: Carved into the wall in place of raised ribs.
• Transverse base ring: Regulates outflow at the bottom of the cone.
The exterior is based on a Chinese bamboo weaving technique, with strips interlaced horizontally and vertically in dense layers. Designed for the Year of the Snake, the weave’s outermost strip becomes a snake’s body.
Inverted and viewed from above, the pattern resembles a caisson ceiling, a structure that ancient Chinese architecture reserved for prestigious buildings. Like bamboo weaving, it is both structural and decorative, and the dripper takes its name from it.

• Dripper: DragonFly “Caisson Ceiling” CC62 Dripper x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
“Caisson Ceiling” CC62 Dripper (with CT62 Groove) |
|
Weight |
TBC |
|
Dimensions |
113mm top diameter x 30mm bottom diameter x 70mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 cups |
|
Filter |
1 to 2 cup cone filter: ORIGAMI 1-2 cup, Sibarist Cone S, Hiflux Folding V 01 |
|
Cone Angle |
62° |
|
Heat Resistance |
Up to 120°C (248°F) |
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
| Item | Price | Qty | Total | |
|---|---|---|---|---|
| Subtotal |
$0.00 |
|||
| Shipping | ||||
| Total | ||||