Competitor Collections

This 8oz Mino ware latte bowl and saucer is shaped so steamed milk integrates fully with the espresso and leaves a wide, even surface for latte art.

The ORIGAMI Latte Bowl with Saucer Set (8oz) pairs ORIGAMI’s 8oz porcelain latte bowl with its matching saucer. Made in Japan in the Mino ware tradition, the bowl holds 250ml when full, sized for an 8oz latte or cappuccino, with a wide mouth that gives free-pour patterns room to set.

The Design of Flow Dynamics

ORIGAMI 6oz Latte Art Cup is designed with latte art in mind. Its rounded profile carries incoming milk down and around the cup as you pour, so it mixes through the espresso instead of sitting on top of it. A well-integrated base gives you a uniform color under the pattern and clean contrast against the white microfoam.

The wide, shallow form gives you more working surface than a tall cup. There is room for a stacked tulip or a rosetta with a full pull-through, and the low height lets you bring the pitcher spout close to the surface when it is time to draw.

The form of the ORIGAMI 8oz latte bowl is worked out around flow dynamics and comfort. The vessel shape guides how the milk stream enters the espresso and circulates through it during the pour, and the side wall thickness is set with lip contact at the rim in mind. The bowl shares its handle design with the ORIGAMI 3oz, 6oz, 8oz, and 10oz latte bowls, so mixed sizes on the same bar handle the same way during service.

Mino Ware Porcelain

The bowl is high-density Mino ware porcelain, part of a ceramic tradition with roughly 400 years of history in Japan’s Gifu Prefecture. It is fired for 12 hours at 2750°F. The dense body is durable enough for daily bar service and holds heat well, so the drink stays warm after it is served.

Product Details

Serving with the Latte Bowl and Saucer

The wide rim of this 250ml capacity cup leaves enough headroom for a full latte-art pour without crowding the pattern at the edge.

The saucer is the single ORIGAMI latte bowl saucer size shared across the 6oz, 8oz, and 10oz bowls. On a café bar, one saucer stock covers all three cup sizes.

The bowl is heat resistant up to 120°C (248°F) and safe in the microwave and dishwasher.

The Bowl and Saucer

•      Convection structure: The rounded interior moves milk around the bowl during the pour, so it integrates evenly with the espresso.

•      Wide pouring surface: The 98mm mouth and shallow body give free-pour patterns room to form, and they let you keep the spout close to the surface as you draw.

•      Shared handle and saucer: The handle matches the ORIGAMI 3oz, 6oz, 8oz, and 10oz latte bowls, and the saucer fits the 6oz, 8oz, and 10oz sizes.

The Porcelain Surface

Each bowl is glazed porcelain fired through a long kiln cycle. Depending on the color and the production run, the glaze can show fine texture or small pinholes, a natural result of how porcelain behaves in the kiln. Size and shape vary slightly from piece to piece for the same reason.

What’s in the Set

•      Latte Bowl: ORIGAMI Latte Bowl (8oz) x 1

•      Saucer: ORIGAMI Latte Bowl Saucer x 1

Specifications

Available in 2 colors

These 360/ 600cc Timemore Carafes are made of borosilicate glass. Choose clear or  with gray undertone.  You can view the true color of the coffee with clear option and the gray undertone gives this carafe a modern, sleek look.

Borosilicate glass has a very low coefficient of thermal expansion and is more resistant to thermal shock than regular glass products.

These Timemore Carafes features thick, geometric handles for an ergonomic grip, and a v-shaped lipped spout designed for a clean pour.

360cc: Volume indicator markings at 300cc

600cc: Volume indicator markings at 600cc/500cc/400cc

Max heat : 150ºC / 300º F

Care instructions:

Do not use directly on open flame

Dishwasher safe

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder or Wooden Holder

- One pack of original ORIGAMI SMALL dripper filter (100 sheets) by CAFEC Japan

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!   

WPM #21 Milk Pitcher — Blankenburg Edition, named by Kay Cheon, 2025 US Barista Champion A limited matte white edition named after Mark Blankenburg, the beloved milk delivery man behind Dune Coffee Roasters.

Color chosen by Kay Cheon, it is a quiet tribute to the people who make great coffee possible.

#21 Spout 17oz is a natural companion to the 10 oz and 22 oz Blankenburg for a complete bar flow setup. 

Pour with definition

The WPM #21 is built for baristas who want crisp, defined lines on medium to large cups. Its protruding round tip and wider vessel make it the go-to choice for 10 to 12 oz pours where precision and contrast matter most.

Slanted Top Design 

With dual volume indicators at 6 oz and 7.5 oz, the signature sloped rim gives you the same precise control WPM is known for, scaled for medium cup sizes. Tilt nearly horizontal before milk begins to flow, bringing the spout close to the surface for a gentler, more controlled pour every time.

Round Tip #21 Spout

Designed for defined, high-contrast output, the protruding round tip delivers crisp lines and a more horizontal flow that gives you greater surface coverage and expressive detail on larger canvases.

Ergonomic Handle and 304 Stainless Steel

Balanced for extended use and comfortable across grip styles, the pitcher is built to hold its shape through daily temperature swings and heavy commercial wear.

The original paper filters designed specifically for the Origami Dripper, crafted by CAFEC in Japan.

Unlike traditional filters, these are cut for a smooth, ridge-free conical shape that sits cleanly inside the dripper, allowing for even water flow and consistent extraction, whether you're pouring fast for a brighter cup or slow for something richer and fuller-bodied.

Details:

• Style: Conical, no ridges. Designed to complement the Origami Dripper's fluted exterior while keeping the interior smooth for unrestricted flow
• Size: CUP2, ideal for 1–2 cups brew
• Quantity: 100 sheets per pack
• Material: Virgin pulp. Unbleached, chlorine-free, and free of any papery off-taste, so nothing gets between you and the coffee's true flavor
• Origin: Made in Japan by CAFEC, a name trusted by specialty coffee brewers worldwide

 As a safety precaution, all filters are final sale and not returnable.

The original paper filters designed specifically for the Origami Dripper, crafted by CAFEC in Japan.

Unlike traditional filters, these are cut for a smooth, ridge-free conical shape that sits cleanly inside the dripper, allowing for even water flow and consistent extraction, whether you're pouring fast for a brighter cup or slow for something richer and fuller-bodied.

Details:

• Style: Conical, no ridges. Designed to complement the Origami Dripper's fluted exterior while keeping the interior smooth for unrestricted flow
• Size: CUP4, ideal for 1–4 cups brew
• Quantity: 100 sheets per pack
• Material: Virgin pulp. Unbleached, chlorine-free, and free of any papery off-taste, so nothing gets between you and the coffee's true flavor
• Origin: Made in Japan by CAFEC, a name trusted by specialty coffee brewers worldwide

The AS Resin dripper holder has grooves along the inner rim for stability. It sits the dripper higher and enables a more leveled bed.

The holder is made of styrene-acrylonitrile copolymer that are resistant to the boiling heat of hot water, and therefore is dishwasher friendly. 

Add this beautiful ORIGAMI Dripper holder in to your set up for a touch of modern aesthetics. This Dripper holder works for both small and medium ORIGAMI Drippers.

Material: Made in Japan. Matte transparent Acrylonitrile Styrene resin, high thermal resistance.

Diameter: 4 5/8" / Rim (Underside) 2 3/4"

Add this beautiful Acacia wood ORIGAMI Dripper holder to your set up for a touch of zen. This Dripper holder works for both small and medium ORIGAMI Drippers.

Material: Acacia Wood

Diameter: 4.75" / RIm (Underside) 2.5"

Cleaning Instructions: 

Routine Cleaning (after each use)

Wipe down the holder with a damp cloth to remove dust, drips, and debris. For coffee residue, a soft microfiber cloth slightly dampened with warm water is your best tool. Dry it immediately and thoroughly after wiping. 

What to avoid

Keep alcohol-based products and similar substances away from the wood, as these can draw moisture out and cause the wood to dry and crack. Wipe up any spills quickly. Never submerge the holder in water or run it through a dishwasher. Avoid detergent-based soaps that contain silicone or ammonia, as these can break down the outer layer of the wood and reduce its natural luster.

Conditioning (every 3-6 months)

Apply a wood oil such as tung or teak oil sparingly with a clean cloth, rubbing in the direction of the grain, and wipe away any excess to avoid a greasy finish.  This is especially important given the holder's regular exposure to moisture from brewing.

Storage and placement

Keep the holder away from extreme heat sources, and choose a position away from windows where direct sunlight could regularly hit it. After each brew session, allow it to air dry fully before setting it away.

This sensory cup is a collaboration between ORIGAMI JAPAN and World Brewers Cup Champion Du Jianing 2019.

The ORIGAMI Sensory Cup was subsequently featured again at the World Brewer's Cup Champions routine. World Brewer Cup Champion Carlos Medina's routine, making this cup a champions' choice three championships in a row.

The ORIGAMI Sensory Cup is designed to maximize the sensory experience. Its specially designed shape retains and captures the aroma of the coffee inside the cup.

Product Description

• Made in Japan with Minoware porcelain

• 360ml / 12oz in volume

• Perfect paring with Small / Medium ORIGAMI Dripper

Diameter x Height :  Φ89cm (3.5") × 106 (4.1")

Four hundred years of craft in your hands, for your morning cup.

The ORIGAMI Dripper Medium is sized for 1-4 cup brewing, for a brew prepared for sharing or at cafés preparing larger brews up to 40 grams dosage.

Handcrafted in Toki City, Gifu Prefecture, the ceramic heartland of Japan, the ORIGAMI Small Ceramic Dripper carries the same Mino-yaki porcelain tradition as its larger counterpart: a craft four to five hundred years old, practiced today by only a few dozen artisans. In your hands it is a brewer. In theirs it is a continuation of something much older.

The 20-fold interior works with both conical and wave style filters, giving you the freedom to brew to the cup you want, not the equipment you have. Conical filters encourage faster airflow and a brighter extraction. Wave filters settle the flow, producing something fuller and rounder. The porcelain holds heat steadily through both.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery and washi paper. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The ORIGAMI Dripper was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

Excellent Brewer compatible with both wave and conical style filters 

The 20-fold interior of the ORIGAMI Dripper Medium does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown. 

Recommended Set

A dripper collar or holder is strongly recommended to stabilize the ORIGAMI Dripper during brewing and prevent it from sitting directly in the server. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both available separately and sized for this dripper.

Compatible Filters

The ORIGAMI Dripper Medium is compatible with the following filter papers. The ORIGAMI Dripper Medium is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box.

Conical  ORIGAMI Conical Filter (Cup 4),  Sibarist Cone M,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets

Hybrid Sibarist B3 Hybrid Filter

Wave  Origami Wave Medium,  April Large Wave Filter, Hiflux Wave Filter 185, Kalita Wave 185,

We recommend to not only stick with one style of filter, but to try out different filters for your recipes.

What’s in the Box

This listing is for one ORIGAMI Dripper Medium (dripper only). Available in a wide range of colours. A dripper holder is not included and is purchased separately.

–      ORIGAMI Dripper Medium  x 1

A glossy white exterior makes this a perfect competition pitcher.

Product Details

• Narrow Spout for delicate fine lines - swipe to the last photo to see the comparison between our sharp spout and round spout

• Signature WPM slanted top design with 6 oz milk volume indicator

• Full Handle for any gripping style

• Material: 304 18/8 Stainless Steel. Uncoated, food-safe interior. Gloss white powder-coated exterior.

• Wide diameter

Model #22 15oz Slow Pour Supply Signature Spout

A wider spout makes this a versatile pitcher for dramatic bold lines and service pours.

Product Details

• Our widest spout for dramatic bold lines - swipe to the last photo to see comparison between Periwinkle and our regular round spout.

• Signature WPM slanted top design with 6 oz milk volume indicator

• Full Handle for any gripping style

• Material: 304 18/8 Stainless Steel. Uncoated, food safe interior. Matte blue powder coated exterior.

• Wide diameter

A latte art pitcher in Peony, sized for small milk based drinks and built for steady, consistent pours. The WPM 10oz Latte Art Pitcher with Wide Spout in Peony holds 10oz (300ml) of milk and combines WPM's signature slanted top with a wide diameter body and a full handle. The pitcher uses a WPM #06 round spout and is finished in a matte Peony exterior, a pink powder coating unique to this color series.

The wide diameter body leaves additional room for the milk to move during steaming, while the full handle supports a range of grip styles throughout the pour. WPM's slanted top directs the milk stream at an angle that reaches the crema layer sooner, producing fuller, higher contrast patterns without excessive tilt.

WHY YOU'LL LOVE IT

–       Compact 10oz body sized for macchiato, cortado, and piccolo pours.

–       WPM #06 round spout delivers a moderate, consistent flow for controlled placement.

–       Signature slanted top brings the milk stream closer to the crema, reducing the tilt needed to start a pour.

–       Wide body diameter gives steaming milk extra room to move, supporting smoother microfoam.

–       Full handle accommodates a range of grip styles for comfort and stability during the pour.

–       Matte Peony finish gives the exterior a distinct, vibrant pink appearance.

RECOMMENDED FOR

–       Macchiato, cortado, and piccolo service.

–       Hearts, stacked tulips, and wing based tulips.

–       Baristas building pattern control before moving to narrower or wider spout profiles.

–       Cafes seeking a distinct color option for small format pours.

DESIGN PHILOSOPHY

Peony belongs to WPM's color series, which pairs the brand's proven pitcher bodies with distinct exterior finishes rather than changing the underlying engineering. Model #26 carries the Peony finish in a 10oz format, and the same color is also available in a 15oz pitcher fitted with a WPM #06 round spout, giving cafes a matching set across pour volumes.

At 10oz, the Peony pitcher keeps the #06 spout's round profile and moderate, consistent flow, though the opening reads proportionally wider on this smaller body than it does on WPM's larger pitchers. The spout belongs to WPM's Push and Flow series, built for continuous pouring rather than the edge controlled drag techniques used with narrower competition spouts.

DESIGN FEATURES

WPM SIGNATURE SLANTED TOP

WPM's slanted top is original to the brand's pitcher line and angles the milk stream toward the crema surface sooner than a flat top design. This reduces the tilt needed to begin a pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.

WPM #06 ROUND SPOUT

The #06 spout is part of WPM's Push and Flow series, designed for continuous pouring with a moderate, consistent flow rather than a fast or narrow one. On this 10oz body, the opening reads proportionally wider than it does on larger WPM pitchers, though the flow rate matches other #06 spouts in the line. The round profile suits hearts, stacked tulips, and wing based tulips, and its forgiving flow makes it a practical option for baristas developing pattern control.

WIDE BODY DIAMETER

Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even at this compact volume.

FULL HANDLE

The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to finishing lines.

MATTE PEONY FINISH

The exterior is finished in Peony, a matte pink powder coating applied over a food grade stainless steel body. The matte finish gives the pitcher a distinct, vibrant appearance that sets it apart within WPM's color series.

The name Peony, a fuchsia pink finish, is credited to Amy Smithwick.

PERFORMANCE

RECOMMENDED DRINK SIZES

The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. At this volume, there is not enough milk for hybrid, multi stage pours.

POURING CHARACTERISTICS

The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Paired with the slanted top, this supports precise placement for hearts, stacked tulips, and wing based tulips.

WORKFLOW

The spout's moderate, forgiving flow suits baristas at a beginner and up skill level, while still rewarding more precise base and layering technique as skill develops. It also gives experienced baristas a dependable option for small format service pours.

SPECIFICATIONS

WHAT'S INCLUDED

–       1 x WPM 10oz Latte Art Pitcher with Wide Spout in Peony.

CARE & MAINTENANCE

Hand wash the pitcher with warm water and a mild detergent after each use. Dry it immediately with a soft cloth to keep the matte finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk residue left to sit can affect both the interior stainless steel and the exterior finish over time.

FREQUENTLY ASKED QUESTIONS

WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?

The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.

WHAT SPOUT DOES THIS PITCHER USE, AND WHAT PATTERNS DOES IT SUPPORT?

It uses the WPM #06 round spout from WPM's Push and Flow series. At this volume, it suits hearts, stacked tulips, and wing based tulips.

IS PEONY AVAILABLE IN OTHER SPOUT SHAPES?

Yes. Peony is also available in a 10oz pitcher fitted with a WPM #07 narrow spout.

IS THIS PITCHER SUITABLE FOR BEGINNERS?

Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for baristas building pattern control.

HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?

Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte exterior.

The WPM 10oz Latte Art Pitcher with Wide Spout in Peony brings WPM's proven slanted top design to a compact, cup matched size with a distinct matte finish. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small format pours in daily service or while building pattern control.

09 Wide Spout ( previously known as round spout) for a dramatic flow

Please note that this product name has changed to reflect the spout: pitcher size relationship. The product remains the same.

A versatile pitcher that is perfect for both to-go and in house pours. Great for large to-go cups, as well as milk sharing. Wider spout for dramatic lines.

Product Details

• Round Spout, perfect for bold dramatic pours

• Signature WPM slanted top design with 9.5 oz milk volume indicator

• Full Handle for any gripping style

• Material:  304 18/8 Stainless Steel. Uncoated, food safe interior. 

• Matte Black

• Wide diameter

Pour with definition

The WPM #21 is built for baristas who want crisp, defined lines on medium to large cups. Its protruding round tip and wider vessel make it the go-to choice for 10 to 12 oz pours where precision and contrast matter most.

Slanted Top Design

With dual volume indicators at 6 oz and 7.5 oz, the signature sloped rim gives you the same precise control WPM is known for, scaled for medium cup sizes. Tilt nearly horizontal before milk begins to flow, bringing the spout close to the surface for a gentler, more controlled pour every time.

Brushed Silver Finish

A non-coated, textured finish built for the demands of a commercial kitchen. The brushed surface naturally masks fingerprints, staying clean and professional-looking through the busiest service.

Round Tip #21 Spout

Designed for defined, high-contrast output, the protruding round tip delivers crisp lines and a more horizontal flow that gives you greater surface coverage and expressive detail on larger canvases.

Ergonomic Handle and 304 Stainless Steel

Balanced for extended use and comfortable across grip styles, the pitcher is built to hold its shape through daily temperature swings and heavy commercial wear.

A versatile round-spout pitcher in matte black, balanced for multiple latte art patterns across standard cup sizes.

The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black is a 15oz milk pitcher designed for standard latte and cappuccino pours. It uses WPM’s #06 spout, a round-profile spout that produces a broad, moderate pour stream compared to narrow spout profiles. This balanced flow makes it versatile across multiple latte art pattern types.

The pitcher includes a 6oz milk volume indent marked on the interior wall, allowing a set pour amount to be measured without a separate vessel, preventing milk waste. This format is commonly used for standard-size lattes and cappuccinos where baristas are learning and practicing pattern variation. The 15oz capacity provides ample milk for steaming and pouring.

Product Details

The Pitcher

The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black uses WPM’s #06 spout in a 15oz format. It uses WPM’s slanted top design, an original WPM innovation where the pour edge is angled rather than flat. This slanted edge directs milk flow to a single exit point at an optimal angle, allowing the latte artist to reach the crema sooner and create fuller patterns with higher contrast. A 6oz milk volume indent is marked on the interior wall, allowing a set pour amount to be measured without a separate measuring vessel. The body is wide in diameter relative to its 15oz capacity, which allows the pitcher to hold enough milk to steam properly without the volume constraint of a taller, narrower shape. The handle is a full loop, sized to accommodate different grip positions. The exterior is finished in matte black.

Spout #06: Round Profile, Push and Flow

The #06 is a round-profile spout part of WPM’s Service Pour series. Round spouts produce a medium width ribbon of milk with a moderate, consistent flow rate. The #06 is categorized as a Push and Flow spout, meaning it’s designed for free-pour techniques using continuous, controlled milk movement rather than drag-and-draw styles.

Best for patterns: Wing base tulips, stacked hearts, medium-line rosettas (slozettas), and hybrid/combination pours. The moderate flow and broad pour stream make it forgiving for learning multiple pattern types.

Cup size fit: The 15oz pitcher volume is optimized for 6–8oz cups, making it ideal for flat white, small latte, and cappuccino. This mid-size cup format with the moderate #06 flow rate emphasizes precision and pattern definition in standard drinking vessels.

Skill level: Beginner friendly. The balanced flow of the round profile and the moderate volume of a 15oz pitcher make it a versatile choice for baristas who are learning and practicing multiple patterns without excessive difficulty.

What’s in the Box

WPM 15oz Latte Art Pitcher with Round Spout in Matte Black  x 1

The Core Component

Spout: WPM #06 spout in a 15oz format. Round profile produces a moderate, consistent flow rate — broader than narrow spout profiles but more controlled than wide profiles. Part of WPM Service Pour series with engineered lip design. Includes a 6oz milk volume indent. Uses WPM’s slanted top design, an original WPM innovation that directs milk flow at an optimal angle, allowing the barista to reach crema sooner for fuller patterns and higher contrast.

Body: Wide diameter relative to capacity, holding a full 15oz for steaming. Rounded interior bottom promotes smooth frothing, promoting breaking of large bubbles into silky microfoam.

Handle: Full loop handle, sized for multiple grip positions.

Specifications

Brand  WPM

Spout Type  WPM #06 spout, 15oz round-spout format; Push and Flow category; Service Pour series

Volume  15oz ; 6oz milk volume indent for measured pours; optimized for 6–8oz cups 

Material  Interior: 304 18/8 stainless steel, uncoated, food-safe. Exterior: matte black finish – coating material/process not specified in source data; confirm with supplier before publishing.

Care  Hand washed and wiped dry

Origin  China

Brews 1-2 Cups – popular size for morning ritual and competition brewing

The ORIGAMI Dripper Small is sized for 1-2 cup brewing, for the morning ritual or on coffee competition stage.

Handcrafted in Toki City, Gifu Prefecture, the ceramic heartland of Japan, the ORIGAMI Small Ceramic Dripper carries the same Mino-yaki porcelain tradition as its larger counterpart: a craft four to five hundred years old, practiced today by only a few dozen artisans. In your hands it is a brewer. In theirs it is a continuation of something much older.

The 20-fold interior works with both conical and wave style filters, giving you the freedom to brew to the cup you want, not the equipment you have. Conical filters encourage faster airflow and a brighter extraction. Wave filters settle the flow, producing something fuller and rounder. The porcelain holds heat steadily through both.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery and washi paper. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The ORIGAMI Dripper was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

Excellent Brewer compatible with both wave and conical style filters 

The 20-fold interior of the ORIGAMI Dripper Small does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown.

The ORIGAMI Dripper Small brews one to two cups, holding up to around 25 grams of dry grounds. It is the right size for a morning pour over or Brewers Cup competition

Recommended Set

A dripper collar or holder is strongly recommended to stabilize the ORIGAMI Dripper during brewing and prevent it from sitting directly in the server. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both available separately and sized for this dripper. 

Compatible Filters

The ORIGAMI Dripper Small is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box

Conical  Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC, Sibarist Filters - SMALL CONE for 01,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets (small), Hario V60 Filter (01), Kono 1-2 cup filters

Wave  Origami Wave Small, Kalita Wave 155, April Small Wave Filter, Hiflux Wave Filter 155

We recommend trying different filters to explore recipes for your coffee