Competitor Collections

Sign up to get notified!

The ORIGAMI Harmony Cup was developed in collaboration with Ryan Wibawa, Indonesia’s Brewers Champion in 2016 and 2024, who also represented his country and placed third in the 2024 World Brewers Cup (WBrC). His simple yet thought-provoking question  “Is it possible to create a cup that focuses particularly on aroma?”  became the inspiration behind its creation.

The Harmony Cup was designed to follow the growing trend in specialty coffee of uniting aroma and flavor. It was crafted to allow the subtle and layered characteristics of coffee to be fully experienced. Every sip is meant to reveal the richness and delicacy of carefully brewed coffee.

Shape that Enhances Aroma

The shape of the Harmony Cup draws from ORIGAMI’s Aroma Series. It is designed to capture the fragrance of coffee and release it gently as you lift the cup. The complex and fruity aromas of specialty coffee fill the senses before the first sip. The cup holds the aroma and warmth inside, so the coffee can be enjoyed fully from the first taste to the last drop.

Rim Shape that Smooths the Flow of Coffee

The rim of the Harmony Cup has a gentle, spreading angle. This allows the coffee to flow naturally across the tongue. The shape guides the liquid evenly, so the flavors touch every part of the mouth. The tip, center, sides, and back of the tongue all experience the coffee in balance. Each sip reveals the sweetness, body, and depth of the coffee. The rim allows the care and attention of the barista to be fully felt in the cup.

A Multi-Layered Taste Experience

The Harmony Cup combines the Aroma Series shape with the Pinot rim. The rim curves outward slightly. This allows the coffee to spread evenly across the tongue. The shape highlights the bright acidity and fruity notes, brings out sweetness in the center of the tongue, and leaves a soft, gentle bitterness at the back. Each sip becomes a layered, complete experience that reveals the richness and complexity of specialty coffee.

Dimensions: 3.78 inches wide × 3.54 inches tall (inner diameter 3.35 inches)
Capacity: 10.8 fl oz (when full)
Weight: Approximately 13.4 oz

Crafted to elevate the experience of hand-drip specialty coffee, this cup is designed with precision and intention. The thin rim offers a refined mouthfeel, allowing the delicate nuances and clarity of specialty coffee to come through with each sip.

Its form encourages the coffee to flow from the back of the tongue to the sides, enhancing the perception of clean acidity and balance. The gently curved inner shape is designed to trap and concentrate aroma when the cup is filled about one-third of the way, creating a rich aromatic experience as the scent rises toward your nose.

Available in two thoughtfully selected colorways - Alpine White, which beautifully showcases the color of the coffee, and Stoneware Grey, which minimizes visual distraction and allows aroma and taste to take center stage.

Now available with Wave Filter Option

Excellent Brewer compatible with both wave and conical style filters

Introducing the AS Resin ORIGAMI Air S Brewer - a modern take on a classic favorite!

Experience brewing perfection with our excellent Brewer, designed to be compatible with both wave and conical style filters.

Crafted with a cutting-edge styrene-acrylonitrile copolymer, the Air S has high thermal stability, eliminating the need to preheat your brewer. This is especially suitable for outdoors and commercial use. The thermal stability also helps with providing a stable temperature environment for a fast brewing process.

The AS Resin series comes in a variety of translucent and lively colors, boasting a frosted finish that adds a touch of elegance to your brewing experience. These AS drippers are a stunning representation of the beloved original Origami series, but with the added benefit of being made from resin material. 

Prepare to be captivated by our breathtaking range of colors! The Origami Air S is available in six vibrant shades, making it the perfect companion for your professional brew bars or your exciting camping adventures. These eye-catching drippers will not only enhance your brew bar's aesthetics but also serve as a fantastic introduction to the world of home brewing.

To complete your brewing setup, simply pair the Air S with either the conical or wave style filter and opt for our optional resin dripper holder. With everything in place, you're good to go on your journey to brewing excellence!

What's in the bundle

And that's not all! When you choose the ORIGAMI AIR S Brewing Bundle, you'll receive everything you need for 1-2 cup servings. Here's what's included:

• One Air S ORIGAMI Dripper in the color of your choice: Select the shade that resonates with your style and let it become the centerpiece of your brewing setup.

• One ORIGAMI AS Resin Holder: Keep your dripper securely in place with our specially designed holder, ensuring stability and ease of use.

• One pack of original ORIGAMI SMALL dripper filter (100 sheets) by CAFEC Japan: Experience the art of filtration with our high-quality filters, meticulously crafted to enhance the flavor and aroma of your brews.

Check out our Brewing Recipes!

Are you looking for brewing inspiration? We've got you covered! Visit our Brew Recipe Blog for printable recipe cards!, where you'll find an array of recipes to excite your taste buds. We even offer printable recipe cards, making it convenient for you to explore new flavors and techniques.

Elevate your brewing journey with the AS Resin ORIGAMI Air S Brewer. Discover a world of flavors, craftsmanship, and possibilities. Order yours today and experience the perfect blend of style and functionality!

Air S Dripper + Resin Holder Bundle

In this bundle, you will get:

1. 1 x Air S Dripper in the color of your choice
2. 1 x AS Resin Holder

Excellent Brewer compatible with both wave and conical style filters

Introducing the AS Resin ORIGAMI Air S Brewer - a modern take on a classic favorite!

Experience brewing perfection with our excellent Brewer, designed to be compatible with both wave and conical style filters.

Crafted with a cutting-edge styrene-acrylonitrile copolymer, the Air S has high thermal stability, eliminating the need to preheat your brewer. This is especially suitable for outdoors and commercial use. The thermal stability also helps with providing a stable temperature environment for a fast brewing process.

The AS Resin series comes in a variety of translucent and lively colors, boasting a frosted finish that adds a touch of elegance to your brewing experience. These AS drippers are a stunning representation of the beloved original Origami series, but with the added benefit of being made from resin material. 

Prepare to be captivated by our breathtaking range of colors! The Origami Air S is available in six vibrant shades, making it the perfect companion for your professional brew bars or your exciting camping adventures. These eye-catching drippers will not only enhance your brew bar's aesthetics but also serve as a fantastic introduction to the world of home brewing.

To complete your brewing setup, simply pair the Air S with either the conical or wave style filter and opt for our optional resin dripper holder. With everything in place, you're good to go on your journey to brewing excellence!

What's in the bundle

And that's not all! When you choose the ORIGAMI AIR S Brewing Bundle, you'll receive everything you need for 1-2 cup servings. Here's what's included:

• One Air S ORIGAMI Dripper in the color of your choice: Select the shade that resonates with your style and let it become the centerpiece of your brewing setup.

• One ORIGAMI AS Resin Holder: Keep your dripper securely in place with our specially designed holder, ensuring stability and ease of use.

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

Check out our Brewing Recipes!

Are you looking for brewing inspiration? We've got you covered! Visit our Brew Recipe Blog for printable recipe cards!, where you'll find an array of recipes to excite your taste buds. We even offer printable recipe cards, making it convenient for you to explore new flavors and techniques.

Elevate your brewing journey with the AS Resin ORIGAMI Air S Brewer. Discover a world of flavors, craftsmanship, and possibilities. Order yours today and experience the perfect blend of style and functionality!

[coming soon]

The TIMEMORE Black Mirror Basic 3 is the newest and most refined scale in the Timemore lineup. Lighter, thinner, and wider than its predecessor, the Basic 3 retains everything that made the Basic 2 a workhorse and builds meaningfully on it. With improved weighing sensitivity, a brew ratio calculator, static shielding, and dedicated physical controls, this scale is built for brewers who want every data point without the friction.

DESIGN AND BUILD

The Basic 3 arrives in a redesigned outer shell that is lighter, thinner, and wider than the Basic 2. A single forged top shell pairs with a precision-fit silicone gasket for IPX3-certified splash resistance, keeping moisture out during brewing. The matte surface resists fingerprints, and the included dual-function silicone pad supports both pourover brewing and espresso portafilter use.

CONTROLS AND DISPLAY

Where older generation scales relied on a single button to cycle through modes, the Basic 3 introduces three dedicated physical controls: a combined Mode/Power button, a Timer button, and a Tare button. Each does exactly one job, so there is no cycling through functions mid-service. The bright LED display shows all your data at a glance and is easy to read even in well-lit environments. The display is fully invisible while powered off, and the scale supports up to 24 hours of continuous use while plugged in and charging.

WEIGHING ACCURACY AND STATIC SHIELDING

At the heart of the Basic 3 is a high-precision pressure sensor developed in-house at Timemore. It detects weights as low as 0.2g, down from the Basic 2's 0.5g minimum, with 0.1g accuracy maintained even under heavier loads. The Basic 3 also introduces an advanced static shield that neutralizes interference from magnetic grinder vessels, a limitation of the previous generation that affected accuracy and slowed down workflow.

BREW DATA, FLOW RATE, AND RATIO CALCULATOR

The Basic 3 carries over the real-time flow rate display from the Basic 2, showing flow in 1/10ml per second for live feedback on your pour pace. New to the Basic 3 is a built-in brew ratio calculator, adding assisted ratio calculation on top of the flow rate display and giving you a complete picture of your brew from start to finish.

TIMER AND AUTO SHUTOFF

The weight-triggered auto timer, carried over from the Basic 2, starts the moment liquid hits your vessel, removing one more manual step from your routine. When your session is done, the scale powers down automatically after 15 minutes of timer inactivity or 3 minutes of total inactivity, keeping battery life in check between brews.

BATTERY LIFE

The Basic 3 runs on a 1600mAh rechargeable lithium-ion battery, good for approximately 280 five-minute pourovers on a single charge. Charging to full takes around 3.5 hours via USB-C. Use a 5V 1A-2A adapter; do not use a fast charger.

WHAT'S INCLUDED

One TIMEMORE Black Mirror Basic 3 Scale, dual-function silicone pad that is both pourover and portafilter compatible, and USB-C charging cable.

THE AIR M: A Modern Twist on Classic Brewing

Brewing the perfect cup of coffee just got even better with the AS Resin ORIGAMI Air M Brewer. Designed to impress both coffee enthusiasts and professionals alike, this exceptional brewer combines style, functionality, and durability like no other. Share your favorite coffee with this 1-4 cup brewer!

WHO IS THIS BREWER FOR?

Portable and durable - this is the perfect shatterproof brewer from beginner to pro. National Champions around the world have used this brewer during their routine and yielded excellent results. 

Take it anywhere you go: from camping trips, road trip, home brewing to your commercial setting, the Air S is perfect for service, education and leisure!

One Brewer to fit Various Filters

The Air M is compatible with both wave and conical style filters, giving you the freedom to experiment and discover your preferred brewing method. Whether you enjoy the smoothness of a wave filter or the body of a conical brew, the Air M has you covered.

Unparalleled Strength and Beauty

Made with styrene-acrylonitrile copolymer, the Air M is built to withstand the test of time and perfect for outdoor and commercial brewing. The ORIGAMI Resin Drippers offer the beloved design of the high quality porcelain Origami series, now in a shatterproof version. Choose from a range of translucent, lively colors with a captivating frosted finish, adding a touch of elegance to your brewing routine.

Perfect Size, Perfect Brew

With its ideal size for brewing 1-4 cups, it has the capacity of dosing up to 30 grams of coffee, the Air M lets you share your favorite coffee with your love ones every time.

Resin for Thermal Stability

The Air M, part of the ORIGAMI series, is made with shatterproof styrene-acrylonitrile copolymer. This advanced material offers high thermal stability, eliminating the need for preheating. Perfect for outdoor adventures and commercial use, the Air M ensures a stable temperature environment for a speedy brewing process.

A Pop of Color for Every Occasion

Express your personality with the stunning Origami Air S. Available in six breathtaking colors, this brewer is not only an excellent companion for your professional brew bars but also a must-have for unforgettable camping trips. Prepare to turn heads with these eye-catching drippers, serving as a beautiful addition to your brew bar and a fantastic introduction to the world of home brewing.

Unleash Your Creativity: Looking for brewing inspiration? Explore our Brew Recipe Blog, where you'll find a treasure trove of recipes to ignite your passion. Discover printable recipe cards and unlock a world of exquisite flavors waiting to be savored.

Compatible with the following Filters:

Hario 02 / Cafe 4 cup / Kalita 185 / Sibarist Cone M / ORIGAMI Cup 4  

09 Wide Spout ( previously known as round spout) for a dramatic flow

Please note that this product name has changed to reflect the spout: pitcher size relationship. The product remains the same.

A versatile pitcher that is perfect for both to-go and in house pours. Great for large to-go cups, as well as milk sharing. Wider spout for dramatic lines.

Product Details

• Round Spout, perfect for bold dramatic pours

• Signature WPM slanted top design with 9.5 oz milk volume indicator

• Full Handle for any gripping style

• Material:  304 18/8 Stainless Steel. Uncoated, food safe interior. 

• Matte Black

• Wide diameter

A versatile round-spout pitcher in matte black, balanced for multiple latte art patterns across standard cup sizes.

The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black is a 15oz milk pitcher designed for standard latte and cappuccino pours. It uses WPM’s #06 spout, a round-profile spout that produces a broad, moderate pour stream compared to narrow spout profiles. This balanced flow makes it versatile across multiple latte art pattern types.

The pitcher includes a 6oz milk volume indent marked on the interior wall, allowing a set pour amount to be measured without a separate vessel, preventing milk waste. This format is commonly used for standard-size lattes and cappuccinos where baristas are learning and practicing pattern variation. The 15oz capacity provides ample milk for steaming and pouring.

Product Details

The Pitcher

The WPM 15oz Latte Art Pitcher with Round Spout in Matte Black uses WPM’s #06 spout in a 15oz format. It uses WPM’s slanted top design, an original WPM innovation where the pour edge is angled rather than flat. This slanted edge directs milk flow to a single exit point at an optimal angle, allowing the latte artist to reach the crema sooner and create fuller patterns with higher contrast. A 6oz milk volume indent is marked on the interior wall, allowing a set pour amount to be measured without a separate measuring vessel. The body is wide in diameter relative to its 15oz capacity, which allows the pitcher to hold enough milk to steam properly without the volume constraint of a taller, narrower shape. The handle is a full loop, sized to accommodate different grip positions. The exterior is finished in matte black.

Spout #06: Round Profile, Push and Flow

The #06 is a round-profile spout part of WPM’s Service Pour series. Round spouts produce a medium width ribbon of milk with a moderate, consistent flow rate. The #06 is categorized as a Push and Flow spout, meaning it’s designed for free-pour techniques using continuous, controlled milk movement rather than drag-and-draw styles.

Best for patterns: Wing base tulips, stacked hearts, medium-line rosettas (slozettas), and hybrid/combination pours. The moderate flow and broad pour stream make it forgiving for learning multiple pattern types.

Cup size fit: The 15oz pitcher volume is optimized for 6–8oz cups, making it ideal for flat white, small latte, and cappuccino. This mid-size cup format with the moderate #06 flow rate emphasizes precision and pattern definition in standard drinking vessels.

Skill level: Beginner friendly. The balanced flow of the round profile and the moderate volume of a 15oz pitcher make it a versatile choice for baristas who are learning and practicing multiple patterns without excessive difficulty.

What’s in the Box

WPM 15oz Latte Art Pitcher with Round Spout in Matte Black  x 1

The Core Component

Spout: WPM #06 spout in a 15oz format. Round profile produces a moderate, consistent flow rate — broader than narrow spout profiles but more controlled than wide profiles. Part of WPM Service Pour series with engineered lip design. Includes a 6oz milk volume indent. Uses WPM’s slanted top design, an original WPM innovation that directs milk flow at an optimal angle, allowing the barista to reach crema sooner for fuller patterns and higher contrast.

Body: Wide diameter relative to capacity, holding a full 15oz for steaming. Rounded interior bottom promotes smooth frothing, promoting breaking of large bubbles into silky microfoam.

Handle: Full loop handle, sized for multiple grip positions.

Specifications

Brand  WPM

Spout Type  WPM #06 spout, 15oz round-spout format; Push and Flow category; Service Pour series

Volume  15oz ; 6oz milk volume indent for measured pours; optimized for 6–8oz cups 

Material  Interior: 304 18/8 stainless steel, uncoated, food-safe. Exterior: matte black finish – coating material/process not specified in source data; confirm with supplier before publishing.

Care  Hand washed and wiped dry

Origin  China