WPM 10oz Latte Art Pitcher with Wide Spout in Peony
Regular price $41.25
Shipping calculated at checkout.
A latte art pitcher in Peony, sized for small milk based drinks and built for steady, consistent pours. The WPM 10oz Latte Art Pitcher with Wide Spout in Peony holds 10oz (300ml) of milk and combines WPM's signature slanted top with a wide diameter body and a full handle. The pitcher uses a WPM #06 round spout and is finished in a matte Peony exterior, a pink powder coating unique to this color series.
The wide diameter body leaves additional room for the milk to move during steaming, while the full handle supports a range of grip styles throughout the pour. WPM's slanted top directs the milk stream at an angle that reaches the crema layer sooner, producing fuller, higher contrast patterns without excessive tilt.
WHY YOU'LL LOVE IT
– Compact 10oz body sized for macchiato, cortado, and piccolo pours.
– WPM #06 round spout delivers a moderate, consistent flow for controlled placement.
– Signature slanted top brings the milk stream closer to the crema, reducing the tilt needed to start a pour.
– Wide body diameter gives steaming milk extra room to move, supporting smoother microfoam.
– Full handle accommodates a range of grip styles for comfort and stability during the pour.
– Matte Peony finish gives the exterior a distinct, vibrant pink appearance.
RECOMMENDED FOR
– Macchiato, cortado, and piccolo service.
– Hearts, stacked tulips, and wing based tulips.
– Baristas building pattern control before moving to narrower or wider spout profiles.
– Cafes seeking a distinct color option for small format pours.
DESIGN PHILOSOPHY
Peony belongs to WPM's color series, which pairs the brand's proven pitcher bodies with distinct exterior finishes rather than changing the underlying engineering. Model #26 carries the Peony finish in a 10oz format, and the same color is also available in a 15oz pitcher fitted with a WPM #06 round spout, giving cafes a matching set across pour volumes.
At 10oz, the Peony pitcher keeps the #06 spout's round profile and moderate, consistent flow, though the opening reads proportionally wider on this smaller body than it does on WPM's larger pitchers. The spout belongs to WPM's Push and Flow series, built for continuous pouring rather than the edge controlled drag techniques used with narrower competition spouts.
DESIGN FEATURES
WPM SIGNATURE SLANTED TOP
WPM's slanted top is original to the brand's pitcher line and angles the milk stream toward the crema surface sooner than a flat top design. This reduces the tilt needed to begin a pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.
WPM #06 ROUND SPOUT
The #06 spout is part of WPM's Push and Flow series, designed for continuous pouring with a moderate, consistent flow rather than a fast or narrow one. On this 10oz body, the opening reads proportionally wider than it does on larger WPM pitchers, though the flow rate matches other #06 spouts in the line. The round profile suits hearts, stacked tulips, and wing based tulips, and its forgiving flow makes it a practical option for baristas developing pattern control.
WIDE BODY DIAMETER
Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even at this compact volume.
FULL HANDLE
The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to finishing lines.
MATTE PEONY FINISH
The exterior is finished in Peony, a matte pink powder coating applied over a food grade stainless steel body. The matte finish gives the pitcher a distinct, vibrant appearance that sets it apart within WPM's color series.
The name Peony, a fuchsia pink finish, is credited to Amy Smithwick.
PERFORMANCE
RECOMMENDED DRINK SIZES
The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. At this volume, there is not enough milk for hybrid, multi stage pours.
POURING CHARACTERISTICS
The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Paired with the slanted top, this supports precise placement for hearts, stacked tulips, and wing based tulips.
WORKFLOW
The spout's moderate, forgiving flow suits baristas at a beginner and up skill level, while still rewarding more precise base and layering technique as skill develops. It also gives experienced baristas a dependable option for small format service pours.
SPECIFICATIONS
|
Specification |
Details |
|
Brand |
WPM |
|
Model |
#26 |
|
Name |
Peony |
|
Capacity |
10oz (300ml) |
|
Spout |
WPM #06 round spout, Push and Flow series |
|
Top Design |
Signature WPM slanted top |
|
Body |
Wide diameter relative to capacity |
|
Handle |
Full loop handle |
|
Material, Interior |
304 (18/8) food grade stainless steel, uncoated |
|
Material, Exterior |
Matte fuchsia powder coating (Peony finish) |
|
Origin |
China |
|
Manufacturer |
WPM |
WHAT'S INCLUDED
– 1 x WPM 10oz Latte Art Pitcher with Wide Spout in Peony.
CARE & MAINTENANCE
Hand wash the pitcher with warm water and a mild detergent after each use. Dry it immediately with a soft cloth to keep the matte finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk residue left to sit can affect both the interior stainless steel and the exterior finish over time.
FREQUENTLY ASKED QUESTIONS
WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?
The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.
WHAT SPOUT DOES THIS PITCHER USE, AND WHAT PATTERNS DOES IT SUPPORT?
It uses the WPM #06 round spout from WPM's Push and Flow series. At this volume, it suits hearts, stacked tulips, and wing based tulips.
IS PEONY AVAILABLE IN OTHER SPOUT SHAPES?
Yes. Peony is also available in a 10oz pitcher fitted with a WPM #07 narrow spout.
IS THIS PITCHER SUITABLE FOR BEGINNERS?
Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for baristas building pattern control.
HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?
Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte exterior.
The WPM 10oz Latte Art Pitcher with Wide Spout in Peony brings WPM's proven slanted top design to a compact, cup matched size with a distinct matte finish. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small format pours in daily service or while building pattern control.
Colors of actual products might show up slightly different than in the product photos. This is due to the various settings of monitors. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
Products that have a shimmering coating will also show differently under different lighting setup. Colors might appear different even under a fluorescent light or a warmer shade bulb.
Perfect for <6oz cup sizes, these beautiful pitchers are the smallest size in our lineup. Available in both narrow, round and wide spout shape options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
Please note that this product name has changed to reflect the spout: pitcher size relationship. The product remains the same.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
WPM 15oz Snowfall Pitcher with Narrow Spout
Regular price $45.25
Shipping calculated at checkout.
A glossy white exterior makes this a perfect competition pitcher.
Product Details
-
Narrow Spout for delicate fine lines - swipe to the last photo to see the comparison between our sharp spout and round spout
-
Signature WPM slanted top design with 6 oz milk volume indicator
-
Full Handle for any gripping style
-
Material: 304 18/8 Stainless Steel. Uncoated, food-safe interior. Gloss white powder-coated exterior.
-
Wide diameter
Perfect for 6-8oz cups, these pitchers come with a 6oz milk volume indicator. Replacing the traditional 12oz pitchers for a more horizontal flow, enabling a less drastic initial contact. This gives the cup more contrast and higher color definition. This is our most popular size. Available in narrow, round and wide options.
We recommend using soap and warm water and focus on cleaning the interior of the milk pitcher after every shift. Milk contains fat, proteins, and sugars that can leave residue on surfaces, especially if only rinsed with water. Over time, this residue can harden and become more difficult to clean.
As milk spoils, lactose is fermented into lactic acid, increasing the acidity. Acids can slowly corrode metal, even stainless steel, though stainless steel is more resistant. Prolonged exposure to acidic substances can wear down the protective layer of stainless steel.
Using soap and warm water is standard for removing milk fats and proteins effectively. Soap helps break down the fat molecules that water alone cannot remove, preventing buildup.
After wash, we recommend you to dry it with towel and leave them right side up to air out. Drying is important because water left on the surface of stainless steel can cause water spots and possibly encourage corrosion in the long term. Proper drying extends the longevity of metal kitchenware.
NARROW SPOUT
Lipped sharp, slightly rounded narrow spout enables finer lines without sacrificing the flow. This versatile pitcher is great for combination patterns, rosettas, stacks, wing base tulips, and any patterns that require finer lines with a medium flow rate. Available in 10, 15, 17, and 22oz pitchers.
Slow Pour Supply WPM pitchers have proven to be superb in functionality, practicality, and accessibility - from your local neighborhood shops to national level competitions. You can find them on stage with the National Latte Art Champions, Barista Champions, as well as Coffeefest Latte Art World Championship Open winners, Slow Pour WPM pitchers accompany them on stage for an unparalleled flow control experience.
We offer four different size pitchers specifically for various specialty cup sizes.
10oz Pitcher: <6oz Cup
15oz Pitcher: 6-10oz
17oz Pitcher: 8-12oz
22oz Pitcher: 12-16oz
