Brew With Us

Brews 1-2 Cups – popular size for morning ritual and competition brewing

The ORIGAMI Dripper Small is sized for 1-2 cup brewing, for the morning ritual or on coffee competition stage.

Handcrafted in Toki City, Gifu Prefecture, the ceramic heartland of Japan, the ORIGAMI Small Ceramic Dripper carries the same Mino-yaki porcelain tradition as its larger counterpart: a craft four to five hundred years old, practiced today by only a few dozen artisans. In your hands it is a brewer. In theirs it is a continuation of something much older.

The 20-fold interior works with both conical and wave style filters, giving you the freedom to brew to the cup you want, not the equipment you have. Conical filters encourage faster airflow and a brighter extraction. Wave filters settle the flow, producing something fuller and rounder. The porcelain holds heat steadily through both.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery and washi paper. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The ORIGAMI Dripper was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

Excellent Brewer compatible with both wave and conical style filters 

The 20-fold interior of the ORIGAMI Dripper Small does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown.

The ORIGAMI Dripper Small brews one to two cups, holding up to around 25 grams of dry grounds. It is the right size for a morning pour over or Brewers Cup competition

Recommended Set

A dripper collar or holder is strongly recommended to stabilize the ORIGAMI Dripper during brewing and prevent it from sitting directly in the server. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both available separately and sized for this dripper. 

Compatible Filters

The ORIGAMI Dripper Small is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box

Conical  Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC, Sibarist Filters - SMALL CONE for 01,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets (small), Hario V60 Filter (01), Kono 1-2 cup filters

Wave  Origami Wave Small, Kalita Wave 155, April Small Wave Filter, Hiflux Wave Filter 155

We recommend trying different filters to explore recipes for your coffee

This listing is for one Barrel Flavor Cup.

If you are one of those who would appreciate a more holistic enjoyment of coffee akin to a wine drinking experience, the ORIGAMI Barrel Flavor Cup is for you. Shaped like a barrel - the Barrel Flavor Cup has a caved rim that is designed to capture the aroma of the coffee and to provide a heightened sensory experience.

The rim of the Barrel Flavor Cup is intentionally designed to be slightly thinner than its body for a smooth delivery. This thoughtful design, together with its specific size, fits the palm of the hand nicely to provide a comforting sipping experience.

This cup is at 7.1oz, 210ml volume. A pair of the barrel cup would fit perfectly to pair with our 360ml or 600ml Timemore Carafe.

Volume: 7.1oz / 210ml

Size　Φ76×78H

Material: Minoware Porcelain

Waste reconsidered. Craft unchanged.

The ORIGAMI ReWork Ceramic Dripper is the first release in the ReWork project, ORIGAMI’s considered effort to reclaim the porcelain discarded during production and put it back to work. Each dripper incorporates 20% recycled porcelain content, reclaimed from material that would otherwise be waste.

Handcrafted in Toki City, Gifu Prefecture, this is Mino-yaki porcelain: a tradition four to five hundred years old, practiced today by only a few dozen artisans. The recycled material doesn’t change the craft. It becomes part of it.

The ORIGAMI ReWork Ceramic Dripper brews one to two cups. It carries the same 20-fold interior as the rest of the ORIGAMI Dripper range, compatible with both conical and wave style filters, with the same heat retention and the same precise drip hole. What is different is the surface: unglazed, matte, with a quiet shimmer from the recycled material woven through the porcelain.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The shape of the ORIGAMI Ceramic Dripper, which the ORIGAMI ReWork Ceramic Dripper is based on, was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

The ReWork project extends that collaboration. Rather than discard the porcelain that does not meet the standard for regular production, ORIGAMI reintroduces it at 20% content into a new run. The quality standard does not change. The artisans, the kiln, the tolerances: all the same. The difference is in what gets used.

Compatible with Both Wave and Conical Style Filters

The 20-fold interior does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown. 

Recommended Set

A dripper collar or holder is strongly recommended to stabilise the ORIGAMI ReWork Ceramic Dripper during brewing. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both sized for this dripper and available separately.

Compatible Filters

The ORIGAMI ReWork Ceramic Dripper Medium is compatible with the following filter papers. The ORIGAMI Dripper Small is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box.

Conical  ORIGAMI Conical Filter (Cup 4),  Sibarist Cone M,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets

Hybrid Sibarist B3 Hybrid Filter

Wave  Origami Wave Medium,  April Large Wave Filter, Hiflux Wave Filter 185, Kalita Wave 185,

We recommend to not only stick with one style of filter, but to try out different filters for your recipes.

Please Read Before Purchase

The ORIGAMI ReWork Ceramic Dripper is limited to one unit per person due to production quantities. Orders placing multiple units, or multiple orders under the same name, email address, or shipping address, may be cancelled. 

What’s in the Box

This listing is for one ORIGAMI ReWork Dripper. A dripper holder is available separately.

•       ORIGAMI ReWork Medium Dripper  x 1

Waste reconsidered. Craft unchanged.

The ORIGAMI ReWork Ceramic Dripper is the first release in the ReWork project, ORIGAMI’s considered effort to reclaim the porcelain discarded during production and put it back to work. Each dripper incorporates 20% recycled porcelain content, reclaimed from material that would otherwise be waste.

Handcrafted in Toki City, Gifu Prefecture, ORIGAMI ReWork Ceramic Dripper  is Mino-yaki porcelain: a tradition four to five hundred years old, practiced today by only a few dozen artisans. The recycled material doesn’t change the craft. It becomes part of it.

The ReWork Ceramic Dripper brews one to two cups. It carries the same 20-fold interior as the rest of the ORIGAMI Dripper range, compatible with both conical and wave style filters, with the same heat retention and the same precise drip hole. What is different is the surface: unglazed, matte, with a quiet shimmer from the recycled material woven through the porcelain.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The shape of the ORIGAMI Ceramic Dripper, which the ORIGAMI ReWork Ceramic Dripper is based on, was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

The ReWork project extends that collaboration. Rather than discard the porcelain that does not meet the standard for regular production, ORIGAMI reintroduces it at 20% content into a new run. The quality standard does not change. The artisans, the kiln, the tolerances: all the same. The difference is in what gets used.

Compatible with Both Wave and Conical Style Filters

The 20-fold interior does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown. 

Recommended Set

A dripper collar or holder is strongly recommended to stabilise the ORIGAMI ReWork Dripper during brewing. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both sized for this dripper and available separately.

Compatible Filters

The ORIGAMI Rework Ceramic Dripper Small is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box

Conical  Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC, Sibarist Filters - SMALL CONE for 01,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets (small), Hario V60 Filter (01), Kono 1-2 cup filters

Wave  Origami Wave Small, Kalita Wave 155, April Small Wave Filter, Hiflux Wave Filter 155

We recommend trying different filters to explore recipes for your coffee

Please Read Before Purchase

The ReWork Dripper is limited to one unit per person due to production quantities. Orders placing multiple units, or multiple orders under the same name, email address, or shipping address, may be cancelled. 

What’s in the Box

This listing is for one ORIGAMI ReWork Dripper. A dripper holder is available separately.

•       ORIGAMI ReWork Small Dripper  x 1

Watch it brew. Smell it open up. Pour when it’s ready.

The ORIGAMI Pinot Glass Server holds 480ml and is designed to sit under your dripper and work with the coffee, not just collect it. The flared rim and subtle base protrusion encourage natural convection as the brew descends, keeping the coffee in gentle movement through drawdown. The result is a more even extraction with less intervention from the brewer.

The crystal-clear borosilicate-style glass keeps the whole process visible. You can watch the bloom, track the drawdown, and read the colour as the brew develops. At 480ml it is sized for one to two cups, making it the natural companion for a morning pour over or a careful single-serve brew.

The pinot-shaped bowl does something else too. Like the wine glass it is named for, the widened body holds and concentrates aroma, releasing it as you pour.

Designed by ORIGAMI Japan

ORIGAMI Japan is best known for its Mino-yaki ceramic drippers, used by World Brewers Cup competitors and specialty coffee drinkers across the world. The Pinot Glass Server was developed as a companion piece: a server that brings the same considered design to the vessel below the dripper.

The form follows function at every point. The wide mouth accepts drippers without a collar or adapter. The base protrusion creates a small gap between the server and the surface, which, combined with the flared rim, promotes airflow and convection through the brew. The glass is heat-resistant and designed for daily use.

Compatible Brewers

The ORIGAMI Pinot Glass Server is compatible with a wide range of pour over drippers. From the ORIGAMI range, it pairs with the ORIGAMI Dripper Small and ORIGAMI Dripper Medium. It also works with the Graycano, April Brewer, UFO Dripper, Timemore Crystal Eye B75, and Solo Dripper. If you brew with a conical or flat-bottom dripper in the small-to-medium range, this server will most likely fit.

What’s in the Box

This listing is for one ORIGAMI Pinot Glass Server 480ml. Dripper and filters are not included and are available separately.

•       ORIGAMI Pinot Glass Server 480ml  x 1

Due to the nature of heat-resistant glass, minor bubbles or surface variations may occasionally be present. These are inherent to the material and do not affect performance.

Specifications

•       Weight  approx. 170g

•       Dimensions  145mm (W) x 110mm (D) x 85mm (H), capacity 480ml

•       Material  Heat-resistant glass

•       Care  Hand washing recommended. Handle with care: heat-resistant glass is not shatterproof. Minor bubbles or surface variations are inherent to the material.

•       Origin  Made in China

The original paper filters designed specifically for the Origami Dripper, crafted by CAFEC in Japan.

Unlike traditional filters, these are cut for a smooth, ridge-free conical shape that sits cleanly inside the dripper, allowing for even water flow and consistent extraction, whether you're pouring fast for a brighter cup or slow for something richer and fuller-bodied.

Details:

• Style: Conical, no ridges. Designed to complement the Origami Dripper's fluted exterior while keeping the interior smooth for unrestricted flow
• Size: CUP4, ideal for 1–4 cups brew
• Quantity: 100 sheets per pack
• Material: Virgin pulp. Unbleached, chlorine-free, and free of any papery off-taste, so nothing gets between you and the coffee's true flavor
• Origin: Made in Japan by CAFEC, a name trusted by specialty coffee brewers worldwide

THE AIR M: A Modern Twist on Classic Brewing

Brewing the perfect cup of coffee just got even better with the AS Resin ORIGAMI Air M Brewer. Designed to impress both coffee enthusiasts and professionals alike, this exceptional brewer combines style, functionality, and durability like no other. Share your favorite coffee with this 1-4 cup brewer!

WHO IS THIS BREWER FOR?

Portable and durable - this is the perfect shatterproof brewer from beginner to pro. National Champions around the world have used this brewer during their routine and yielded excellent results. 

Take it anywhere you go: from camping trips, road trip, home brewing to your commercial setting, the Air S is perfect for service, education and leisure!

One Brewer to fit Various Filters

The Air M is compatible with both wave and conical style filters, giving you the freedom to experiment and discover your preferred brewing method. Whether you enjoy the smoothness of a wave filter or the body of a conical brew, the Air M has you covered.

Unparalleled Strength and Beauty

Made with styrene-acrylonitrile copolymer, the Air M is built to withstand the test of time and perfect for outdoor and commercial brewing. The ORIGAMI Resin Drippers offer the beloved design of the high quality porcelain Origami series, now in a shatterproof version. Choose from a range of translucent, lively colors with a captivating frosted finish, adding a touch of elegance to your brewing routine.

Perfect Size, Perfect Brew

With its ideal size for brewing 1-4 cups, it has the capacity of dosing up to 30 grams of coffee, the Air M lets you share your favorite coffee with your love ones every time.

Resin for Thermal Stability

The Air M, part of the ORIGAMI series, is made with shatterproof styrene-acrylonitrile copolymer. This advanced material offers high thermal stability, eliminating the need for preheating. Perfect for outdoor adventures and commercial use, the Air M ensures a stable temperature environment for a speedy brewing process.

A Pop of Color for Every Occasion

Express your personality with the stunning Origami Air S. Available in six breathtaking colors, this brewer is not only an excellent companion for your professional brew bars but also a must-have for unforgettable camping trips. Prepare to turn heads with these eye-catching drippers, serving as a beautiful addition to your brew bar and a fantastic introduction to the world of home brewing.

Unleash Your Creativity: Looking for brewing inspiration? Explore our Brew Recipe Blog, where you'll find a treasure trove of recipes to ignite your passion. Discover printable recipe cards and unlock a world of exquisite flavors waiting to be savored.

Compatible with the following Filters:

Hario 02 / Cafe 4 cup / Kalita 185 / Sibarist Cone M / ORIGAMI Cup 4  

Four hundred years of craft in your hands, for your morning cup.

The ORIGAMI Dripper Medium is sized for 1-4 cup brewing, for a brew prepared for sharing or at cafés preparing larger brews up to 40 grams dosage.

Handcrafted in Toki City, Gifu Prefecture, the ceramic heartland of Japan, the ORIGAMI Small Ceramic Dripper carries the same Mino-yaki porcelain tradition as its larger counterpart: a craft four to five hundred years old, practiced today by only a few dozen artisans. In your hands it is a brewer. In theirs it is a continuation of something much older.

The 20-fold interior works with both conical and wave style filters, giving you the freedom to brew to the cup you want, not the equipment you have. Conical filters encourage faster airflow and a brighter extraction. Wave filters settle the flow, producing something fuller and rounder. The porcelain holds heat steadily through both.

A Craft Worth Knowing

Mino-yaki is the ceramic tradition of the Toki area in Gifu Prefecture, a region long celebrated in Japan for its pottery and washi paper. The techniques used to produce ORIGAMI Drippers are the same ones that have shaped ceramics in this region for generations, refined over centuries and carried forward by the artisans who remain.

The ORIGAMI Dripper was designed by the founder of Trunk Coffee in collaboration with these makers. The result is a brewer shaped by both the culture it comes from and the demands of specialty coffee. It has been used by World Brewers Cup competitors and sits equally well on a competition table or a kitchen counter.

Excellent Brewer compatible with both wave and conical style filters 

The 20-fold interior of the ORIGAMI Dripper Medium does two things well. With a conical filter, the folds create airflow channels between the filter and the dripper wall, encouraging faster, more even extraction. With a wave filter, the flat bed geometry changes the brew dynamic entirely, slowing flow rate and producing a fuller, rounder cup. One dripper, two distinct approaches.

The high-density Mino porcelain retains heat through the full pour, keeping the brew bed temperature stable from bloom to drawdown. 

Recommended Set

A dripper collar or holder is strongly recommended to stabilize the ORIGAMI Dripper during brewing and prevent it from sitting directly in the server. The ORIGAMI Wooden Holder and ORIGAMI AS Resin Holder are both available separately and sized for this dripper.

Compatible Filters

The ORIGAMI Dripper Medium is compatible with the following filter papers. The ORIGAMI Dripper Medium is compatible with the following filter papers. ORIGAMI also manufactures its own ORIGAMI Wave (Flat Bottom) Filter Box.

Conical  ORIGAMI Conical Filter (Cup 4),  Sibarist Cone M,  HIFLUX Coffee Filter - Cone Folding V 50 Sheets

Hybrid Sibarist B3 Hybrid Filter

Wave  Origami Wave Medium,  April Large Wave Filter, Hiflux Wave Filter 185, Kalita Wave 185,

We recommend to not only stick with one style of filter, but to try out different filters for your recipes.

What’s in the Box

This listing is for one ORIGAMI Dripper Medium (dripper only). Available in a wide range of colours. A dripper holder is not included and is purchased separately.

–      ORIGAMI Dripper Medium  x 1

The original paper filters designed specifically for the Origami Dripper, crafted by CAFEC in Japan.

Unlike traditional filters, these are cut for a smooth, ridge-free conical shape that sits cleanly inside the dripper, allowing for even water flow and consistent extraction, whether you're pouring fast for a brighter cup or slow for something richer and fuller-bodied.

Details:

• Style: Conical, no ridges. Designed to complement the Origami Dripper's fluted exterior while keeping the interior smooth for unrestricted flow
• Size: CUP2, ideal for 1–2 cups brew
• Quantity: 100 sheets per pack
• Material: Virgin pulp. Unbleached, chlorine-free, and free of any papery off-taste, so nothing gets between you and the coffee's true flavor
• Origin: Made in Japan by CAFEC, a name trusted by specialty coffee brewers worldwide

 As a safety precaution, all filters are final sale and not returnable.

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder

• One pack of ORIGAMI Wave Filter Pack (50 Sheets)

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!   

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder or Wooden Holder

- One pack of original ORIGAMI SMALL dripper filter (100 sheets) by CAFEC Japan

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!