Flat Bottom Brew Gear Collection

A 255ml bone china flat-bottom dripper for 1 to 2 servings, made to sit on a transit base for switch-controlled brewing or a bamboo holder for a standard pour over

The Tri-Spin CT Flat Dripper from DragonFly Design Center is a new bone china flat-bottom pour over dripper built to close that gap. It starts from the CT62 conical dripper and rebuilds it around a flat bottom, with a grooved inner wall and DragonFly's Tri-Spin base.

How the Tri-Spin CT Manages Flow

The inner wall is a flat surface cut with 12 long grooves and 12 short grooves. The filter paper adheres to a larger area of the wall, so there is less room for water to bypass the bed and more of each pour passes through the grounds.

The grooves act as flow guides and pressure relief channels, which keeps the drawdown smooth and the extraction even across the bed. The result is a even extracted cup with clear layers of sensory expression.

At the base, the Tri-Spin hollowed design with multiple grooves spreads the water's exit points to avoid concentration in the center. This reduces the risk of the clogging and helps water move through the whole bed. This matters even more with larger doses, where localized over-extraction is more likely.

DragonFly developed the CT Flat with competition brewing in mind, where a stable, repeatable extraction counts for more than speed.

The Shanwen Jia Exterior

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.

The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Product Details

Brewing with the Transit Base or Bamboo Flat Dripper Holder (Purchase separately)

Paired with the DragonFly Flat-Bottom Transit Base, the dripper brews two ways. With the transit knob open, it runs as a flat-bottom pour over and gives a clean, filter-style cup. With the switch closed gives a fuller, immersion-style cup.

You can also choose to brew with a Bamboo Flat Dripper Holder – using it as a traditional pourover dripper.

It holds 255ml, brews 1 to 2 servings, and takes foldable flat-bottom filter paper or 185 flat-bottom paper filters.

The Groove Structure and Tri-Spin Base

•       Groove structure: Twelve long and twelve short grooves on a flat inner wall let the filter sit closer to the wall while still guiding flow and relieving pressure.

•       Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.

•       New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•       Dripper: DragonFly Tri-Spin CT Flat Dripper (255ml) x 1

Specifications

A 280ml bone china flat-bottom dripper for 1 to 4 servings, made to sit on a transit base for switch-controlled brewing or a bamboo holder for a standard pour over

A flat-bottom pour over drains evenly when the coffee bed stays level and water can exit across the whole base. Uneven flow usually starts where the filter meets the brewer: the paper folds against the wall, fines collect in the center, and the middle of the bed slows while the edges drain through.

The Tri-Spin FS Flat Dripper from DragonFly Design Center, also known by its Chinese name 三旋空玄武 (Xuanwu), is a new bone china flat-bottom brewer designed to keep that flow even. Its transit base lets you brew as a standard pour over, or close the knob and steep as an immersion.

How the Tri-Spin FS Manages Flow

Inside the dripper, 20 raised ribs hold the filter paper off the wall so it keeps its shape through the brew. With the paper supported, water moves through the bed at a more consistent rate, and results vary less from one brew to the next.

The wall angle is set to keep the flow rate quick while still allowing a finer grind. A finer grind raises extraction yield, so a faster drawdown can still reach a full extraction and keep a clear, layered flavor.

At the base, DragonFly's Tri-Spin hollowed design spreads the water's exit points across the base rather than concentrating them in the center. This reduces clogging and keeps water moving through the whole bed instead of stalling in the middle, which matters most at larger doses where localized over-extraction is more likely.

The dripper received a German Design Award in 2026.

The Shanwen Jia Exterior

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.

The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Product Details

Brewing with the Transit Base

With the Transit Base open, it brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the switch closed, water stays in contact with the grounds until you open it, which gives a fuller, immersion-style cup.

Immersion is a forgiving starting point while your pour technique is still developing. The open setting gives experienced brewers direct control over pour rhythm and timing.

You can also choose to brew with a Bamboo Dripper Holder – using it as a traditional pourover dripper.

DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml brews 1 to 2 servings, and takes 185 flat-bottom paper filters. It is available in Shell Pink, Black, and White.

The Tri-Spin Base and Rib Structure

•       Rib structure: Twenty raised internal ribs support the filter paper and hold its shape through the brew.

•       Tri-Spin hollowed base: Spreads the outflow across the base instead of concentrating it in the center, which reduces clogging at larger doses.

•       New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•       Dripper: DragonFly Tri-Spin FS Flat Dripper (280ml) x 1

Specifications

The 2.0 edition of the April Plastic Brewer. Made of improved plastic Makrolon®, the April plastic brewers keeps the brewing temperature more stable, enabling more consistency in the brewing process.

Features:

The bottom of the April Brewer features three "Filter Holder" wedges that hold your paper filter in place. This elevates the filter and enables a fast drawdown. The result is a perfectly balanced, transparent, and reliable taste experience.

The circular lines along the wall of the brewer allow more air pockets to be formed; enabling more air circulation. This helps brew consistency and enabling a cleaner, more transparent tasting cup.

FDA-approved Polycarbonate, Makrolon® has high thermo stability, enable you to maintain a consistent brewing temperature. 

As a safety precaution, all filters are final sale and not returnable.

What is the difference from the original version? 

• FDA-approved Polycarbonate, Makrolon® 2456 550115. This has increased the weight of the brewer by 7g and improved its ability to maintain a consistent brewing temperature. 
  
  
• Otherwise, the design is the same. 

Recommended Paper filter: April Filters or Kalita 155/185

April is a coffee roastery, rooted in Copenhagen, home to the Danish Roasting Champion 2019 and the 2nd place at World Brewers Cup 2019.

 As a safety precaution, all filters are final sale and not returnable.

April Plastic Brewers are crafted in Indonesia

A porcelain brewer with 400 years of history

Made of minoware clay, the Origami Dripper carries 400 years of history of minoware production of the Gifu region, famous for its washi paper and pottery.

Minoware is a ceramic-making technique some 400-500 years old and only a few dozen artisans left in Japan still know the craft. By purchasing a Origami Dripper, you are bringing this rich tradition into your coffee brewing routine.

Excellent Brewer compatible with both wave and conical style filters

Made with high density clay, the Origami has excellent heat retaining properties. When used with the conical filter, the 20 folds encourages faster brew time by enabling faster airflow. When used with a wave style filter, it can be used as a flatbed brewer.

This ORIGAMI Small Dripper Intro Bundle includes everything you need for 1-2 cups servings. We have chosen a rotation of seasonal colors!

What's in the bundle

- One SMALL size ORIGAMI Dripper in the color of your choice

- One ORIGAMI AS Resin Holder or Wooden Holder

- One pack of original ORIGAMI SMALL dripper filter (100 sheets) by CAFEC Japan

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

RECIPES Want to read some recipes for brewing inspiration? Visit our Brew Recipe Blog for printable recipe cards!   

In this competition set, you will get: 

1. THREE April Plastic Brewers in the color of your choice
2. THREE packs of April Large size filters, designed to fit perfectly with the brewer

The 2.0 edition of the April Plastic Brewer. Made of improved plastic Makrolon®, the April plastic brewers keeps the brewing temperature more stable, enabling more consistency in the brewing process.

Features:

The bottom of the April Brewer features three "Filter Holder" wedges that hold your paper filter in place. This elevates the filter and enables a fast drawdown. The result is a perfectly balanced, transparent, and reliable taste experience.

The circular lines along the wall of the brewer allow more air pockets to be formed; enabling more air circulation. This helps brew consistency and enabling a cleaner, more transparent tasting cup.

FDA-approved Polycarbonate, Makrolon® has high thermo stability, enable you to maintain a consistent brewing temperature. 

As a safety precaution, all filters are final sale and not returnable.

What is the difference from the original version? 

• FDA-approved Polycarbonate, Makrolon® 2456 550115. This has increased the weight of the brewer by 7g and improved its ability to maintain a consistent brewing temperature. 
  
  
• Otherwise, the design is the same. 

Recommended Paper filter: April Filters or Kalita 155/185

April is a coffee roastery, rooted in Copenhagen, home to the Danish Roasting Champion 2019 and the 2nd place at World Brewers Cup 2019.

 As a safety precaution, all filters are final sale and not returnable.

April Plastic Brewers are crafted in Indonesia