Flat Bottom Brew Gear Collection

A 255ml bone china flat-bottom dripper for 1 to 2 servings, made to sit on a transit base for switch-controlled brewing or a bamboo holder for a standard pour over

The Tri-Spin CT Flat Dripper from DragonFly Design Center is a new bone china flat-bottom pour over dripper built to close that gap. It starts from the CT62 conical dripper and rebuilds it around a flat bottom, with a grooved inner wall and DragonFly's Tri-Spin base.

How the Tri-Spin CT Manages Flow

The inner wall is a flat surface cut with 12 long grooves and 12 short grooves. The filter paper adheres to a larger area of the wall, so there is less room for water to bypass the bed and more of each pour passes through the grounds.

The grooves act as flow guides and pressure relief channels, which keeps the drawdown smooth and the extraction even across the bed. The result is a even extracted cup with clear layers of sensory expression.

At the base, the Tri-Spin hollowed design with multiple grooves spreads the water's exit points to avoid concentration in the center. This reduces the risk of the clogging and helps water move through the whole bed. This matters even more with larger doses, where localized over-extraction is more likely.

DragonFly developed the CT Flat with competition brewing in mind, where a stable, repeatable extraction counts for more than speed.

The Shanwen Jia Exterior

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.

The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Product Details

Brewing with the Transit Base or Bamboo Flat Dripper Holder (Purchase separately)

Paired with the DragonFly Flat-Bottom Transit Base, the dripper brews two ways. With the transit knob open, it runs as a flat-bottom pour over and gives a clean, filter-style cup. With the switch closed gives a fuller, immersion-style cup.

You can also choose to brew with a Bamboo Flat Dripper Holder – using it as a traditional pourover dripper.

It holds 255ml, brews 1 to 2 servings, and takes foldable flat-bottom filter paper or 185 flat-bottom paper filters.

The Groove Structure and Tri-Spin Base

•       Groove structure: Twelve long and twelve short grooves on a flat inner wall let the filter sit closer to the wall while still guiding flow and relieving pressure.

•       Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.

•       New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•       Dripper: DragonFly Tri-Spin CT Flat Dripper (255ml) x 1

Specifications

A 280ml bone china flat-bottom dripper for 1 to 4 servings, made to sit on a transit base for switch-controlled brewing or a bamboo holder for a standard pour over

A flat-bottom pour over drains evenly when the coffee bed stays level and water can exit across the whole base. Uneven flow usually starts where the filter meets the brewer: the paper folds against the wall, fines collect in the center, and the middle of the bed slows while the edges drain through.

The Tri-Spin FS Flat Dripper from DragonFly Design Center, also known by its Chinese name 三旋空玄武 (Xuanwu), is a new bone china flat-bottom brewer designed to keep that flow even. Its transit base lets you brew as a standard pour over, or close the knob and steep as an immersion.

How the Tri-Spin FS Manages Flow

Inside the dripper, 20 raised ribs hold the filter paper off the wall so it keeps its shape through the brew. With the paper supported, water moves through the bed at a more consistent rate, and results vary less from one brew to the next.

The wall angle is set to keep the flow rate quick while still allowing a finer grind. A finer grind raises extraction yield, so a faster drawdown can still reach a full extraction and keep a clear, layered flavor.

At the base, DragonFly's Tri-Spin hollowed design spreads the water's exit points across the base rather than concentrating them in the center. This reduces clogging and keeps water moving through the whole bed instead of stalling in the middle, which matters most at larger doses where localized over-extraction is more likely.

The dripper received a German Design Award in 2026.

The Shanwen Jia Exterior

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.

The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Product Details

Brewing with the Transit Base

With the Transit Base open, it brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the switch closed, water stays in contact with the grounds until you open it, which gives a fuller, immersion-style cup.

Immersion is a forgiving starting point while your pour technique is still developing. The open setting gives experienced brewers direct control over pour rhythm and timing.

You can also choose to brew with a Bamboo Dripper Holder – using it as a traditional pourover dripper.

DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml brews 1 to 2 servings, and takes 185 flat-bottom paper filters. It is available in Shell Pink, Black, and White.

The Tri-Spin Base and Rib Structure

•       Rib structure: Twenty raised internal ribs support the filter paper and hold its shape through the brew.

•       Tri-Spin hollowed base: Spreads the outflow across the base instead of concentrating it in the center, which reduces clogging at larger doses.

•       New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•       Dripper: DragonFly Tri-Spin FS Flat Dripper (280ml) x 1

Specifications

THE AIR M: A Modern Twist on Classic Brewing

Brewing the perfect cup of coffee just got even better with the AS Resin ORIGAMI Air M Brewer. Designed to impress both coffee enthusiasts and professionals alike, this exceptional brewer combines style, functionality, and durability like no other. Share your favorite coffee with this 1-4 cup brewer!

WHO IS THIS BREWER FOR?

Portable and durable - this is the perfect shatterproof brewer from beginner to pro. National Champions around the world have used this brewer during their routine and yielded excellent results. 

Take it anywhere you go: from camping trips, road trip, home brewing to your commercial setting, the Air S is perfect for service, education and leisure!

One Brewer to fit Various Filters

The Air M is compatible with both wave and conical style filters, giving you the freedom to experiment and discover your preferred brewing method. Whether you enjoy the smoothness of a wave filter or the body of a conical brew, the Air M has you covered.

Unparalleled Strength and Beauty

Made with styrene-acrylonitrile copolymer, the Air M is built to withstand the test of time and perfect for outdoor and commercial brewing. The ORIGAMI Resin Drippers offer the beloved design of the high quality porcelain Origami series, now in a shatterproof version. Choose from a range of translucent, lively colors with a captivating frosted finish, adding a touch of elegance to your brewing routine.

Perfect Size, Perfect Brew

With its ideal size for brewing 1-4 cups, it has the capacity of dosing up to 30 grams of coffee, the Air M lets you share your favorite coffee with your love ones every time.

Resin for Thermal Stability

The Air M, part of the ORIGAMI series, is made with shatterproof styrene-acrylonitrile copolymer. This advanced material offers high thermal stability, eliminating the need for preheating. Perfect for outdoor adventures and commercial use, the Air M ensures a stable temperature environment for a speedy brewing process.

A Pop of Color for Every Occasion

Express your personality with the stunning Origami Air S. Available in six breathtaking colors, this brewer is not only an excellent companion for your professional brew bars but also a must-have for unforgettable camping trips. Prepare to turn heads with these eye-catching drippers, serving as a beautiful addition to your brew bar and a fantastic introduction to the world of home brewing.

Unleash Your Creativity: Looking for brewing inspiration? Explore our Brew Recipe Blog, where you'll find a treasure trove of recipes to ignite your passion. Discover printable recipe cards and unlock a world of exquisite flavors waiting to be savored.

Compatible with the following Filters:

Hario 02 / Cafe 4 cup / Kalita 185 / Sibarist Cone M / ORIGAMI Cup 4  

Air S Dripper + Resin Holder Bundle

In this bundle, you will get:

1. 1 x Air S Dripper in the color of your choice
2. 1 x AS Resin Holder

Excellent Brewer compatible with both wave and conical style filters

Introducing the AS Resin ORIGAMI Air S Brewer - a modern take on a classic favorite!

Experience brewing perfection with our excellent Brewer, designed to be compatible with both wave and conical style filters.

Crafted with a cutting-edge styrene-acrylonitrile copolymer, the Air S has high thermal stability, eliminating the need to preheat your brewer. This is especially suitable for outdoors and commercial use. The thermal stability also helps with providing a stable temperature environment for a fast brewing process.

The AS Resin series comes in a variety of translucent and lively colors, boasting a frosted finish that adds a touch of elegance to your brewing experience. These AS drippers are a stunning representation of the beloved original Origami series, but with the added benefit of being made from resin material. 

Prepare to be captivated by our breathtaking range of colors! The Origami Air S is available in six vibrant shades, making it the perfect companion for your professional brew bars or your exciting camping adventures. These eye-catching drippers will not only enhance your brew bar's aesthetics but also serve as a fantastic introduction to the world of home brewing.

To complete your brewing setup, simply pair the Air S with either the conical or wave style filter and opt for our optional resin dripper holder. With everything in place, you're good to go on your journey to brewing excellence!

What's in the bundle

And that's not all! When you choose the ORIGAMI AIR S Brewing Bundle, you'll receive everything you need for 1-2 cup servings. Here's what's included:

• One Air S ORIGAMI Dripper in the color of your choice: Select the shade that resonates with your style and let it become the centerpiece of your brewing setup.

• One ORIGAMI AS Resin Holder: Keep your dripper securely in place with our specially designed holder, ensuring stability and ease of use.

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

Check out our Brewing Recipes!

Are you looking for brewing inspiration? We've got you covered! Visit our Brew Recipe Blog for printable recipe cards!, where you'll find an array of recipes to excite your taste buds. We even offer printable recipe cards, making it convenient for you to explore new flavors and techniques.

Elevate your brewing journey with the AS Resin ORIGAMI Air S Brewer. Discover a world of flavors, craftsmanship, and possibilities. Order yours today and experience the perfect blend of style and functionality!