Conical Brew Gear Collection

A 62-degree conical dripper with a built-in stand that sits on your carafe and keeps the flow even from bloom to drawdown

The DragonFly CT62 from DragonFly Design Center is a new bone china conical dripper with a 62-degree interior angle, built to hold the filter close and keep the flow even, available in Grey, Black, and White. Its built-in stand rests on the rim of a carafe or serving vessel, so it brews straight into your server on its own.

How the DragonFly CT62 Manages Flow

The interior is an original DragonFly Design Center design, refined through repeated brewing tests to reach a uniform flow rate. The goal is a balanced drawdown, which helps prevent clogging and over-extraction and preserves the coffee's aroma and flavor.

The cone is set at 62 degrees so the filter paper sits snugly against the inner wall. With the paper in steady contact, water percolates through the bed at a repeatable rate from one brew to the next, keeping extraction consistent.

The Shanwen Armor Exterior (山文甲)

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (山文甲) from China's Tang Dynasty. The 62 refers to the interior cone angle.

The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.

The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

Product Details

Brewing with the Built-In Stand

The built-in stand sits on the rim of a carafe or serving vessel and holds the dripper securely in place while you pour. Three curved sections at its center surround the bottom of the dripper to keep it from slipping.

One corner of the stand extends into a handle. It rises slightly at the tip and has concave and convex details on the top and underside, giving a secure three-finger grip when you set the dripper on the carafe or lift it off after drawdown.

The DragonFly CT62 brews 1 to 2 servings and takes V60 size 01 and 02 conical paper filters.

The 62-Degree Cone and Body

•     62-degree cone: Holds the filter paper snugly against the inner wall for consistent extraction.

•     Flow-tested interior: Refined through repeated brewing tests for a uniform flow rate and less clogging.

•     New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•     Dripper: DragonFly CT62 with built-in stand x 1

Specifications

A 62° conical dripper sized for 1- 4 cup, with an internal groove structure that keeps the drawdown steady at larger doses

The CT62 Dripper 02 (390ml) from DragonFly Design Center is a new bone china conical dripper made for a larger, 1-4 cup brew. It carries the 62° angle, internal grooves, and exterior texture of the original CT62, with a taller body that raises capacity from 1 to 2 servings to 1 to 4. It is available in Black and White.

How the CT62 Manages Flow

The cone is set at 62°, a proprietary angle DragonFly developed to give a broad, stable extraction range. It responds well to a centered pour or a wider circular spiral pour, so you can adjust your technique without the brew losing balance.

Inside, 24 grooves guide water down the wall. Instead of the raised ribs found in many conical drippers, the CT62 uses recessed channels, with an added ring of horizontal grooves near the base to regulate flow through the lower part of the cone.

DragonFly refined this channel design through repeated testing. The goal is a drawdown that holds a consistent pace from start to finish, which helps reduce clogging and the bitterness, astringency, and sourness that come with uneven extraction.

Product Details

Compatible with the DragonFly Design Center Conical Dripper Transit Base

Set the DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml) and you have instantly transformed it to a hybrid brewer with variable flow rate.

Brewing with the CT62 02

The dripper sits over a cup or server for standard pour over brewing. At 390ml, it handles 1 to 4 servings, so the same brewer works for a single morning cup or a shared pot. It takes 1-4 cup paper filters.

Its base has an integrated raised ring that seats into the DragonFly Conical Dripper Transit Base. It also pairs with the DragonFly Conical Dripper Holder and Silicone Ring for a more secure, stable setup on the brew table.

The new bone china body is heat resistant to 120°C (248°F) and safe for dishwashers, microwave ovens, and dish dryers.

The 62° Cone and Groove Structure

•     62° conical geometry: A proprietary angle that gives a wide working range and room to vary pour style.

•     24 recessed channels: Guide water downward along the wall in place of raised ribs, for a steadier drawdown.

•     Horizontal groove ring: Sits near the base and regulates flow through the lower cone as the bed settles.

The Shanwen Armor Exterior

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (Shanwen Jia) from China's Tang Dynasty. The 62 refers to the interior cone angle.

The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.

The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

What's in the Box

•     Dripper: DragonFly CT62 Dripper 02 (390ml) x 1

Specifications

Coming soon 10.9.26 - sign up for notification

A 62° conical bone china dripper with coral-pattern grooves, built for a quick, even drawdown for 1-2 Cup brew.

The SA62 Saddle Dripper from DragonFly Design Center is a new bone china conical dripper with a 62° wall angle and a grooved interior designed. It brews 1-2 cups with small conical filters and comes in Lilac, Grey, and Black.

How the SA62 Keeps Water Moving

Inside the SA62 Saddle Dripper, twelve long grooves run from the rim down to the outlet, evenly spaced around the wall. Eight shorter, curved grooves branch off them in a coral-like pattern, an original DragonFly design.

The groove pattern gives water more channels along the wall and toward the outlet. DragonFly designed it to speed up the flow rate and support an efficient extraction.

At the base, a ring lets the dripper sit on the DragonFly Transit Switch Base, so the same brewer can easily switch between a standard pour over and a hybrid setup.

For pourover, choose the DragonFly Bamboo Conical Dripper Holder with SA62 Silicone Ring for a traditional pourover and a snug fit.

The Saddle Pattern Exterior

The outer wall carries a repeating raised relief based on the saddle shape found in Tang Dynasty tri-color pottery (sancai): full, three-dimensional, and slightly upturned at the edges.

DragonFly arranges the relief in a regular pattern using a contemporary design language. It references the horse and saddle figures of Tang Dynasty ceramics, and marks 2026 as the Year of the Horse.

Product Details

Brewing with the SA62

It takes Conical 01 and 02 size cone paper filters. Compatible with ORIGAMI 2Cup, Hiflux
High Fast Folding V01, and Sibarist Cone S.

Used on its own, it brews as a fast-flowing cone. Set on the Transit Switch Base, it pairs with DragonFly's switch system for more control over when the brew drains.

The Coral Grooves and Bone China Body

•     Coral-pattern grooves: Twelve long grooves run top to bottom, with eight curved short grooves branching from them to speed up flow.

•     62° cone: The wall angle sets the shape of the coffee bed and fits standard V60 01 and 02 filters.

•     New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•     Dripper: DragonFly SA62 Saddle Dripper x 1

Specifications

The Graycano Dripper: Innovation at its finest, Graycano is the first of its kind.

The Sleeve Pro is not just an accessory. It’s a statement of quality, sustainability and design. Handmade in Portugal, the Sleeve Pro combines functionality, sustainability, and style. Designed for the Graycano Dripper, it provides enhanced insulation, ensuring that your brew stays at the perfect temperature while allowing you to handle the Dripper safely. Thanks to an integrated silicone band, the Sleeve Pro offers an improved grip, making it more secure during use. Crafted from premium cork, a highly sustainable and eco-friendly material, this Sleeve not only enhances your brewing experience but also adds a unique touch to your Dripper. Choose your style and build your collection with this versatile and nature-friendly accessory.

• Limited Edition Obsidian
• Stardust
• Slow Pour Special Edition
• Desert
• Jungle
• Magma
• Ocean
• Galaxy
• Blizzard

Excellent thermo dynamics perfect for floral and fruit forward coffees using lower range brew temperature

Graycano is not your regular metal dripper. Coated in high technology coating, the graycano dripper offers excellent heat conductivity and retention.  Featuring interior protrusions called Lava Ribs, the graycano dripper promotes even extraction through maintaining water flow and temperature consistency, allowing you to accentuate the floral notes and fruit forward notes yet maintaining a balance cup quality using lower range water temperatures. 

Lava Ribs

One of the main features of the graycano is the Lava Ribs.This intentional design of the Graycano brewer mimics the lava ribs of volcanoes, manipulating variables that are specific in creating a perfect brewing environment.  These lava ribs work to promote even flow as water travels downwards, while ensuring the proper channeling of air through the pockets it created. The design and process creates turbulence and allows for even water distribution throughout the coffee. Especially when used in conjunction with the Sibarist Filters, the graycano dripper is able to create a very high consistency in drainage rate.

Perfect ThermoDynamics for a floral and fruit forward brew

In addition to the Lava Ribs, the graycano features a double-walled design with a conical center and a wrapped exterior. This works to create pockets of air under the cone between the center and exterior, assisting in maintaining a consistent and even temperature throughout the brewing process, and in the recirculation of heat from your fresh brew below. 

As a result of the aluminum metal used, the Graycano dripper is able to quickly reach the target temprature and maintaining it throughout the brewing process.  The graycano is coated with high technology coating - a  food safe and scratch resistant material and promotes a clean taste and does not interfere with the flavor of your coffee. The cast aluminum is an excellent choice for lower temperature brewing, a high heat retention and conductivity promotes a complex brew yet accentuating floral and fruity notes of the coffee.

Champion’s Choice

The graycano brewer was used at National Championships, making it to the World Stage - choice of brewer by the German National Champion Nicole Battefeld-Montgomery and Australian National Champion Martin Woelfl.

Made in Germany

Why do we choose to carry the graycano dripper?

BREW THE MOMENT 

Brew the moment is a lifestyle concept surrounding the graycano concept. It was created based on the concept of “Enjoy the moment”, which consists on the conscious appreciation of individual moments. This is very in tune with Slow Pour Supply’s belief in creating moments of intention for yourself 

“We live on a very fast and hectic world. This makes it even more important to slow down and breathe in. That is exactly where the “Brew the moment” begins. A conscious deceleration of the hustle achieved by brewing and enjoying coffee. To appreciate the coffee and also yourself. To pause for a moment and recharge your batteries. Brew the moment with the graycano and let the world pause for a bit.” - graycano

THE AIR M: A Modern Twist on Classic Brewing

Brewing the perfect cup of coffee just got even better with the AS Resin ORIGAMI Air M Brewer. Designed to impress both coffee enthusiasts and professionals alike, this exceptional brewer combines style, functionality, and durability like no other. Share your favorite coffee with this 1-4 cup brewer!

WHO IS THIS BREWER FOR?

Portable and durable - this is the perfect shatterproof brewer from beginner to pro. National Champions around the world have used this brewer during their routine and yielded excellent results. 

Take it anywhere you go: from camping trips, road trip, home brewing to your commercial setting, the Air S is perfect for service, education and leisure!

One Brewer to fit Various Filters

The Air M is compatible with both wave and conical style filters, giving you the freedom to experiment and discover your preferred brewing method. Whether you enjoy the smoothness of a wave filter or the body of a conical brew, the Air M has you covered.

Unparalleled Strength and Beauty

Made with styrene-acrylonitrile copolymer, the Air M is built to withstand the test of time and perfect for outdoor and commercial brewing. The ORIGAMI Resin Drippers offer the beloved design of the high quality porcelain Origami series, now in a shatterproof version. Choose from a range of translucent, lively colors with a captivating frosted finish, adding a touch of elegance to your brewing routine.

Perfect Size, Perfect Brew

With its ideal size for brewing 1-4 cups, it has the capacity of dosing up to 30 grams of coffee, the Air M lets you share your favorite coffee with your love ones every time.

Resin for Thermal Stability

The Air M, part of the ORIGAMI series, is made with shatterproof styrene-acrylonitrile copolymer. This advanced material offers high thermal stability, eliminating the need for preheating. Perfect for outdoor adventures and commercial use, the Air M ensures a stable temperature environment for a speedy brewing process.

A Pop of Color for Every Occasion

Express your personality with the stunning Origami Air S. Available in six breathtaking colors, this brewer is not only an excellent companion for your professional brew bars but also a must-have for unforgettable camping trips. Prepare to turn heads with these eye-catching drippers, serving as a beautiful addition to your brew bar and a fantastic introduction to the world of home brewing.

Unleash Your Creativity: Looking for brewing inspiration? Explore our Brew Recipe Blog, where you'll find a treasure trove of recipes to ignite your passion. Discover printable recipe cards and unlock a world of exquisite flavors waiting to be savored.

Compatible with the following Filters:

Hario 02 / Cafe 4 cup / Kalita 185 / Sibarist Cone M / ORIGAMI Cup 4  

Air S Dripper + Resin Holder Bundle

In this bundle, you will get:

1. 1 x Air S Dripper in the color of your choice
2. 1 x AS Resin Holder

Excellent Brewer compatible with both wave and conical style filters

Introducing the AS Resin ORIGAMI Air S Brewer - a modern take on a classic favorite!

Experience brewing perfection with our excellent Brewer, designed to be compatible with both wave and conical style filters.

Crafted with a cutting-edge styrene-acrylonitrile copolymer, the Air S has high thermal stability, eliminating the need to preheat your brewer. This is especially suitable for outdoors and commercial use. The thermal stability also helps with providing a stable temperature environment for a fast brewing process.

The AS Resin series comes in a variety of translucent and lively colors, boasting a frosted finish that adds a touch of elegance to your brewing experience. These AS drippers are a stunning representation of the beloved original Origami series, but with the added benefit of being made from resin material. 

Prepare to be captivated by our breathtaking range of colors! The Origami Air S is available in six vibrant shades, making it the perfect companion for your professional brew bars or your exciting camping adventures. These eye-catching drippers will not only enhance your brew bar's aesthetics but also serve as a fantastic introduction to the world of home brewing.

To complete your brewing setup, simply pair the Air S with either the conical or wave style filter and opt for our optional resin dripper holder. With everything in place, you're good to go on your journey to brewing excellence!

What's in the bundle

And that's not all! When you choose the ORIGAMI AIR S Brewing Bundle, you'll receive everything you need for 1-2 cup servings. Here's what's included:

• One Air S ORIGAMI Dripper in the color of your choice: Select the shade that resonates with your style and let it become the centerpiece of your brewing setup.

• One ORIGAMI AS Resin Holder: Keep your dripper securely in place with our specially designed holder, ensuring stability and ease of use.

Compatible with the following Filters:

Hario 01 / Cafe 2 cup / Kalita 155 / Sibarist Cone S / ORIGAMI Cup 2 / April Flat Bottom Filter

Check out our Brewing Recipes!

Are you looking for brewing inspiration? We've got you covered! Visit our Brew Recipe Blog for printable recipe cards!, where you'll find an array of recipes to excite your taste buds. We even offer printable recipe cards, making it convenient for you to explore new flavors and techniques.

Elevate your brewing journey with the AS Resin ORIGAMI Air S Brewer. Discover a world of flavors, craftsmanship, and possibilities. Order yours today and experience the perfect blend of style and functionality!

The 2026 World Brewers Cup Champion Nas Jaafar (representing Malaysia) brewer of choice.

The UFO Dripper  V3 is a standalone dripper that can be adapted to the "Hario Switch" brewing system.

Geometry That Guides Extraction

At the core of the V3 is an 80° interior angle designed to promote steady drawdown while maintaining even bed saturation. This angle supports efficient flow through the coffee bed, helping reduce channeling and minimizing stall. Rather than relying on aggressive flow restriction or mechanical intervention, the structure itself regulates movement and extraction.

This geometry also improves performance across a wider grind spectrum - extraction remains controlled and predictable, allowing grind size and pour adjustments to translate clearly into the cup.

Profiles remain expressive yet structured.

Negative Channels and Flow Stability

The negative channel design supports balanced airflow during drawdown, preventing vacuum lock and reducing turbulence. By stabilizing the brew bed and minimizing uneven water distribution, the V3 maintains clarity and a controlled flow.

The result is faster, consistent drawdown without sacrificing balance.

Expanded Capacity for Recipe Flexibility

The larger brew chamber increases practical flexibility. It accommodates higher doses and a broader range of brew ratios while offering greater tolerance for controlled agitation. This enables movement between lighter, clarity-focused brews and fuller extractions without destabilizing the bed.

Designed for Hybrid Brewing

The V3 functions as a standalone percolation dripper with stable flow characteristics. It is equally engineered for adaptation. When paired with the Hario Switch base, it becomes a hybrid immersion system.

In this configuration, you can extend contact time, hold water before release, and intentionally increase extraction depth. The same geometry that supports clean percolation also ensures controlled immersion drawdown once the valve is opened.

One brewer with two distinct extraction approaches. The 80 degree UFO Dripper V3 delivers structural clarity, adaptable workflow, and repeatable results without unnecessary complexity.

Material: Food Safe Triton Resin

Weight: 250g approx

For up to 4 cup brewing.