Milk Pitchers Back in Stock

A latte art pitcher in Peony, sized for small milk based drinks and built for steady, consistent pours. The WPM 10oz Latte Art Pitcher with Wide Spout in Peony holds 10oz (300ml) of milk and combines WPM's signature slanted top with a wide diameter body and a full handle. The pitcher uses a WPM #06 round spout and is finished in a matte Peony exterior, a pink powder coating unique to this color series.

The wide diameter body leaves additional room for the milk to move during steaming, while the full handle supports a range of grip styles throughout the pour. WPM's slanted top directs the milk stream at an angle that reaches the crema layer sooner, producing fuller, higher contrast patterns without excessive tilt.

WHY YOU'LL LOVE IT

–       Compact 10oz body sized for macchiato, cortado, and piccolo pours.

–       WPM #06 round spout delivers a moderate, consistent flow for controlled placement.

–       Signature slanted top brings the milk stream closer to the crema, reducing the tilt needed to start a pour.

–       Wide body diameter gives steaming milk extra room to move, supporting smoother microfoam.

–       Full handle accommodates a range of grip styles for comfort and stability during the pour.

–       Matte Peony finish gives the exterior a distinct, vibrant pink appearance.

RECOMMENDED FOR

–       Macchiato, cortado, and piccolo service.

–       Hearts, stacked tulips, and wing based tulips.

–       Baristas building pattern control before moving to narrower or wider spout profiles.

–       Cafes seeking a distinct color option for small format pours.

DESIGN PHILOSOPHY

Peony belongs to WPM's color series, which pairs the brand's proven pitcher bodies with distinct exterior finishes rather than changing the underlying engineering. Model #26 carries the Peony finish in a 10oz format, and the same color is also available in a 15oz pitcher fitted with a WPM #06 round spout, giving cafes a matching set across pour volumes.

At 10oz, the Peony pitcher keeps the #06 spout's round profile and moderate, consistent flow, though the opening reads proportionally wider on this smaller body than it does on WPM's larger pitchers. The spout belongs to WPM's Push and Flow series, built for continuous pouring rather than the edge controlled drag techniques used with narrower competition spouts.

DESIGN FEATURES

WPM SIGNATURE SLANTED TOP

WPM's slanted top is original to the brand's pitcher line and angles the milk stream toward the crema surface sooner than a flat top design. This reduces the tilt needed to begin a pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.

WPM #06 ROUND SPOUT

The #06 spout is part of WPM's Push and Flow series, designed for continuous pouring with a moderate, consistent flow rather than a fast or narrow one. On this 10oz body, the opening reads proportionally wider than it does on larger WPM pitchers, though the flow rate matches other #06 spouts in the line. The round profile suits hearts, stacked tulips, and wing based tulips, and its forgiving flow makes it a practical option for baristas developing pattern control.

WIDE BODY DIAMETER

Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even at this compact volume.

FULL HANDLE

The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to finishing lines.

MATTE PEONY FINISH

The exterior is finished in Peony, a matte pink powder coating applied over a food grade stainless steel body. The matte finish gives the pitcher a distinct, vibrant appearance that sets it apart within WPM's color series.

The name Peony, a fuchsia pink finish, is credited to Amy Smithwick.

PERFORMANCE

RECOMMENDED DRINK SIZES

The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. At this volume, there is not enough milk for hybrid, multi stage pours.

POURING CHARACTERISTICS

The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Paired with the slanted top, this supports precise placement for hearts, stacked tulips, and wing based tulips.

WORKFLOW

The spout's moderate, forgiving flow suits baristas at a beginner and up skill level, while still rewarding more precise base and layering technique as skill develops. It also gives experienced baristas a dependable option for small format service pours.

SPECIFICATIONS

WHAT'S INCLUDED

–       1 x WPM 10oz Latte Art Pitcher with Wide Spout in Peony.

CARE & MAINTENANCE

Hand wash the pitcher with warm water and a mild detergent after each use. Dry it immediately with a soft cloth to keep the matte finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk residue left to sit can affect both the interior stainless steel and the exterior finish over time.

FREQUENTLY ASKED QUESTIONS

WHAT SIZE DRINKS IS THIS PITCHER DESIGNED FOR?

The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.

WHAT SPOUT DOES THIS PITCHER USE, AND WHAT PATTERNS DOES IT SUPPORT?

It uses the WPM #06 round spout from WPM's Push and Flow series. At this volume, it suits hearts, stacked tulips, and wing based tulips.

IS PEONY AVAILABLE IN OTHER SPOUT SHAPES?

Yes. Peony is also available in a 10oz pitcher fitted with a WPM #07 narrow spout.

IS THIS PITCHER SUITABLE FOR BEGINNERS?

Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for baristas building pattern control.

HOW SHOULD I CLEAN AND MAINTAIN THE FINISH?

Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte exterior.

The WPM 10oz Latte Art Pitcher with Wide Spout in Peony brings WPM's proven slanted top design to a compact, cup matched size with a distinct matte finish. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small format pours in daily service or while building pattern control.

The WPM 10oz Latte Art Pitcher with Narrow Spout in Matte Black is built for small format espresso drinks that call for precise pour placement. Its narrow #07 spout slows the flow rate just enough to give baristas fine control when working in cups under 6oz. The matte black finish and wide-diameter body make it equally suited to daily service and focused practice sessions.

Why you'll love it

- Narrow #07 spout profile reduces flow rate for precise placement in small cups.

- WPM's signature slanted top design directs milk to a single exit point for consistent pours.

- Wide-diameter body holds a full 10oz for proper steaming without volume constraints.

- Full loop handle accommodates multiple grip positions during the pour.

- Matte black powder coated exterior resists visible wear during regular use.

- Uncoated 304 18/8 stainless steel interior keeps the pitcher food safe and easy to clean.

Recommended for

- Macchiatos, cortados, and piccolo lattes served under 6oz.

- Baristas learning controlled pour placement on small format drinks.

- Fine line latte art patterns that depend on a steady, focused stream.

- Cafe service where consistency across small drinks matters.

Design philosophy

WPM designed the Model #27, known as the Small Blankenburg, specifically for milk drinks under 6oz. Rather than scaling down a larger pitcher, WPM paired a 10oz body with its narrow #07 spout so the flow rate matches the smaller pour target. This keeps the milk stream controlled instead of overwhelming a small cup.

The wide-diameter shape preserves enough interior volume for proper steaming even at this smaller capacity. Combined with WPM's slanted top, the result is a pitcher built around the specific demands of small format espresso drinks rather than a general-purpose design shrunk to fit.

Design features

WPM #07 narrow spout

The #07 spout has a narrow, lipped profile that reduces flow rate at the pour point. This gives baristas more time to react and adjust placement, which matters most when working with the limited surface area of a cup under 6oz.

Signature slanted top

WPM's slanted top design angles the pour edge instead of using a flat rim, directing the milk stream to a single exit point. This produces a more consistent stream shape from pour to pour, which supports repeatable pattern work.

Wide-diameter body

The body is wide relative to its 10oz capacity, which gives the pitcher enough interior room to steam properly without being constrained by a taller, narrower shape. This helps maintain steaming consistency even at the smaller volume.

Full loop handle

The full loop handle is sized to accommodate different grip positions, letting baristas adjust their hold as needed without losing control of the pour.

Performance

Pouring characteristics

The narrow #07 spout reduces flow rate compared to a wide or round spout, giving the barista more control over exactly where the milk lands. This makes it easier to build fine lines and maintain clean pattern edges.

Recommended drink sizes

The 10oz (300ml) capacity is sized for drinks under 6oz, including macchiatos, cortados, and piccolo lattes. At this size, the reduced flow rate of the narrow spout suits smaller volumes where placement accuracy matters more than pour speed.

Suitable patterns

The controlled, focused flow works well for ripple hearts, traditional rosettas, wing base tulips, hanging hearts, and swans. The steady stream also makes pour placement approachable for beginners while still supporting the precision needed as skill develops.

Specifications

What's included

- 1 x WPM 10oz Latte Art Pitcher with Narrow Spout in Black.

Care & maintenance

Hand wash with warm water and mild soap after each use, paying close attention to the interior where milk residue builds up. Dry the pitcher fully with a towel and store it right side up to prevent water spots. Avoid prolonged exposure to acidic milk residue, since this can wear down the protective layer on stainless steel over time.

Frequently asked questions

What cup sizes is this pitcher designed for?

It is designed for drinks under 6oz, including macchiatos, cortados, and piccolo lattes.

Why does the narrow spout matter at this size?

The narrow #07 spout reduces flow rate, giving more precise control over pour placement in a smaller cup than a wide or round spout would allow.

Is this pitcher suitable for beginners?

Yes. The steady, focused flow makes pour placement easier to learn, and it continues to support precision as pouring skill develops.

What is the exterior finish and does it affect performance?

The exterior is a matte black powder coating. It does not affect pouring performance and is intended to maintain a clean appearance during regular use.

A round-spout latte art pitcher in matte black, sized for small milk based drinks and precise pour placement. The 10oz Latte Art Pitcher with Wide Spout in Black pairs WPM's signature slanted top with a compact, wide-diameter body, giving baristas a practical tool for macchiatos, cortados, and piccolos where careful placement matters more than volume.

Built on WPM's proven #26 pitcher body, this matte black edition combines a food-grade stainless steel interior with a durable powder-coated exterior. The result is a pitcher that holds its finish through daily service while keeping pours controlled at small volumes.

Why you'll love it

– Compact 10oz body sized for macchiato, cortado, and piccolo pours.

– WPM #06 round spout delivers a moderate, consistent flow for precise placement.

– Signature slanted top brings the milk stream closer to the crema surface, reducing the tilt needed to start a pour.

– Wide body diameter supports easier steaming and milk texturing despite the pitcher's compact size.

– Full handle accommodates multiple grip styles for comfort and stability.

– Matte black powder coated exterior resists dings and holds its shape under repeated daily use.

Recommended for

– Macchiato, cortado, and piccolo service.

– Precise milk placement in small-format pours.

– Hearts, stacked tulips, and wing base tulips.

– Baristas learning pattern control before moving to narrower or wider spout profiles.

Design philosophy

This pitcher reflects WPM's long-standing approach to latte art equipment: pair a reliable, well-tested body with a spout profile matched to a specific pour volume. The WPM #06 spout belongs to WPM's Push and Flow, Service Pour series, developed to keep milk flow moderate and consistent rather than fast, which suits smaller cups where overpouring is easy.

Fitted to the 10oz body, the same #06 spout reads proportionally wider than it does on larger pitchers, while keeping its round profile and predictable flow. The slanted top, a detail original to WPM's pitcher line, angles the stream toward the crema sooner, so the barista does not have to tilt the pitcher as far to begin a pour.

Design features

WPM #06 round spout

The #06 spout is part of WPM's Push and Flow, Service Pour lineup. It produces a moderate, consistent flow rather than a fast or narrow one, which gives baristas more time to place milk accurately in small cups. At this 10oz volume, the spout suits hearts, stacked tulips, and wing base tulips, and its forgiving flow makes it a practical starting point for beginner and beginner-plus baristas building pattern control.

Signature slanted top

The slanted top is original to WPM's pitcher design and directs the milk stream at an angle that reaches the crema surface sooner. This reduces the tilt needed to start the pour, letting the spout sit closer to the surface for finer detail and higher contrast patterns.

Wide body diameter

Relative to its 10oz capacity, the pitcher has a wider body diameter. This gives steaming milk more room to move during texturing, supporting smoother microfoam even in a pitcher sized for small pours.

Full handle

The full loop handle is sized to accommodate a range of grip styles. It keeps the pitcher stable through the full motion of a pour, from initial tilt to the final finishing lines.

Matte black powder coated finish

The exterior is finished with a matte black powder coating over food-grade stainless steel. The coating resists dings and helps the pitcher hold its shape under the repeated handling of daily café use.

304 (18/8) stainless steel construction

The pitcher is built from 304 (18/8) food-grade stainless steel. The interior is left uncoated, keeping it food safe and easy to clean after each use.

Performance

Recommended drink sizes

The 10oz (300ml) capacity is sized for cups under 6oz, including macchiato, cortado, and piccolo. This keeps the milk volume matched to the cup, avoiding excess steamed milk left over after the pour.

Pouring characteristics

The WPM #06 spout produces a moderate, consistent flow that favors control over speed. Combined with the slanted top, this supports precise placement and finer detail work at small pour volumes, including hearts, stacked tulips, and wing base tulips.

Workflow

The spout's moderate, forgiving flow makes it a practical choice for baristas at a beginner-plus skill level who are building pattern control. It also gives more experienced baristas a dependable option for small-format service pours where consistency matters more than flow rate.

Specifications

What's included

– 1 x 10oz Latte Art Pitcher with Wide Spout in Matte Black.

Care & maintenance

Hand wash the pitcher with warm water and a mild detergent after each use, focusing on the interior where milk residue collects. Dry it immediately with a soft cloth to keep the matte black finish free of water spots. Avoid abrasive pads, harsh chemicals, or prolonged soaking, since milk's acidity can wear down stainless steel's protective layer over time if residue is left to sit.

Frequently asked questions

What size drinks is this pitcher designed for?

The 10oz (300ml) capacity is designed for cups under 6oz, such as macchiato, cortado, and piccolo.

What spout does this pitcher use, and what patterns does it support?

It uses the WPM #06 round spout from WPM's Push and Flow, Service Pour series. At this volume, it suits hearts, stacked tulips, and wing base tulips.

Is this pitcher suitable for beginners?

Yes. The #06 spout's moderate, consistent flow is forgiving during the pour, making it a practical starting point for learning pattern control before moving to narrower or wider spout profiles.

Does the wider body diameter affect steaming?

Yes. The wider diameter relative to the 10oz capacity gives milk more room to move during steaming, which supports smoother microfoam despite the pitcher's compact size.

How should I clean and maintain the finish?

Hand wash with warm water and mild detergent, then dry immediately with a soft cloth. Avoid abrasive pads and prolonged soaking to protect both the interior stainless steel and the matte black exterior.

The 10oz Latte Art Pitcher with Wide Spout in Matte Black brings WPM's proven slanted top design to a compact, cup-matched size. Between the moderate flow of the #06 spout and the wider body diameter, it gives baristas a dependable tool for precise, small-format pours in daily service or while building pattern control.