Product by Color - Black

*El Gotero mediano en color Chocolate con leche va a ser descontinuado y actualmente está a la venta*

Una cervecera de porcelana con 400 años de historia

Hecho de arcilla minoware, el Origami Dripper tiene 400 años de historia de producción de minoware en la región de Gifu, famosa por su papel washi y su cerámica.

El minoware es una técnica de fabricación de cerámica que tiene entre 400 y 500 años y sólo unas pocas docenas de artesanos que quedan en Japón todavía conocen el oficio. Al comprar un Gotero de Origami, incorporas esta rica tradición a tu rutina de preparación de café.

Excelente cafetera compatible con filtros ondulados y cónicos.

Elaborado con arcilla de alta densidad, el Origami tiene excelentes propiedades de retención de calor. Cuando se usa con el filtro cónico, los 20 pliegues fomentan un tiempo de preparación más rápido al permitir un flujo de aire más rápido. Cuando se usa con un filtro estilo onda, se puede usar como cafetera de base plana.

Información del Producto

Este Origami Dripper de forma elegante viene en varios colores y dos tamaños.

The 2026 World Brewers Cup Champion Nas Jaafar (representing Malaysia) brewer of choice.

The UFO Dripper  V3 is a standalone dripper that can be adapted to the "Hario Switch" brewing system.

Geometry That Guides Extraction

At the core of the V3 is an 80° interior angle designed to promote steady drawdown while maintaining even bed saturation. This angle supports efficient flow through the coffee bed, helping reduce channeling and minimizing stall. Rather than relying on aggressive flow restriction or mechanical intervention, the structure itself regulates movement and extraction.

This geometry also improves performance across a wider grind spectrum - extraction remains controlled and predictable, allowing grind size and pour adjustments to translate clearly into the cup.

Profiles remain expressive yet structured.

Negative Channels and Flow Stability

The negative channel design supports balanced airflow during drawdown, preventing vacuum lock and reducing turbulence. By stabilizing the brew bed and minimizing uneven water distribution, the V3 maintains clarity and a controlled flow.

The result is faster, consistent drawdown without sacrificing balance.

Expanded Capacity for Recipe Flexibility

The larger brew chamber increases practical flexibility. It accommodates higher doses and a broader range of brew ratios while offering greater tolerance for controlled agitation. This enables movement between lighter, clarity-focused brews and fuller extractions without destabilizing the bed.

Designed for Hybrid Brewing

The V3 functions as a standalone percolation dripper with stable flow characteristics. It is equally engineered for adaptation. When paired with the Hario Switch base, it becomes a hybrid immersion system.

In this configuration, you can extend contact time, hold water before release, and intentionally increase extraction depth. The same geometry that supports clean percolation also ensures controlled immersion drawdown once the valve is opened.

One brewer with two distinct extraction approaches. The 80 degree UFO Dripper V3 delivers structural clarity, adaptable workflow, and repeatable results without unnecessary complexity.

Material: Food Safe Triton Resin

Weight: 250g approx

For up to 4 cup brewing.

The UFO Dripper V3 01 from UFO Coffee Tools is the size 01 version of the V3, built around the same 80 degree interior angle and negative channel structure as the larger model, sized for doses in the 1-2 cup range. It brews on its own as a percolation dripper, and it sits directly onto a Hario Switch base when you want to hold the water instead.

The Story Behind It

The V3 line is built on one decision: open the cone from the 60 degree angle most conical brewers use out to 80 degrees. A wider wall means a shallower bed, and a shallower bed means the depth of the coffee barely moves when the dose does. That is what makes a conical repeatable in the way a flat bottom usually is, without giving up the clarity and acidity people brew conicals for in the first place.

Inside the cone, the wall carries negative channels instead of protruding ribs. The paper seats against a smooth surface rather than clinging to a rib, so airflow stays even and pressure equalizes above and below the brewer. In the 01, that structure sits around a smaller chamber, which is the whole point of this size: the geometry that keeps drawdown stable, on a size that suits the amount of coffee you are actually brewing.

Tritan, and Why the Material Matters Here

The body is Tritan, a food safe copolyeste. It is BPA free, it resists warping at boiling temperatures, and it conducts heat far less readily than metal or glass, so the slurry holds its temperature more steadily through the pour. On a smaller dose, where thermal loss shows up faster, that stability does more work than it does at volume.

Product Details

Geometry That Guides Extraction

The 80 degree interior angle promotes steady drawdown while keeping the bed evenly saturated. It supports efficient flow through the coffee, reduces channeling, and minimizes stall. Nothing here restricts flow mechanically or forces it: the structure itself regulates how water moves.

The same geometry widens the useful grind range. Extraction stays controlled and predictable, so a change in grind size or pour translates clearly into the cup. Profiles stay expressive and structured.

Negative Channels and Flow Stability

The negative channel design supports balanced airflow during drawdown, preventing vacuum lock and reducing turbulence. By stabilizing the brew bed and evening out water distribution, it holds clarity and a controlled flow. Drawdown is faster and consistent, and balance stays intact.

A Chamber Sized for Smaller Doses

The smaller brew chamber of the UFO V3 01 favors smaller brews and the precision that comes with them. It takes doses of roughly 12 to 18 grams on a bed surface that will feel familiar if you have brewed a size 01 conical before. There is still room to move between lighter, clarity focused brews and fuller extractions without destabilizing the bed.

The Silicone Base

The base of the UFO V3 01 is silicone rather than rigid plastic, so it has some give and sits softly on a server or cup. It detaches easily, which is what makes the hybrid setup below possible.

Percolation or Immersion, From One Brewer

On its own, it works as a percolation dripper with stable flow. Take the silicone base off and seat the cone on a Hario Switch base, and it becomes a hybrid immersion brewer. In that configuration you can extend contact time, hold water before releasing it, and deliberately push extraction deeper. The geometry that keeps percolation clean also keeps the immersion drawdown controlled once the valve opens.

One brewer, two distinct extraction approaches, without adding complexity to the workflow.

What’s in the Box

•       UFO Dripper V3 01, Tritan  x 1
•       UFO silicone base  x 1

Filter and Base Compatibility

The 01 takes UFO Type A 01 filters, Type F 01 filters, and the Sibarist FAST UFO Special Edition in size 01. It seats on a Hario Switch base for immersion brewing, and on the included silicone base for standard percolation.