DragonFly Tri-Spin FS Flat Transit – Flat-Bottom Variable Flow Hybrid Brewer with Transit Base, 280ml
Precio habitual $90.00 Guardar $-90.00The DragonFly Tri-Spin FS Flat Transit is a hybrid brewer built from four distinct design choices working together: a turning transit base, a ribbed flat-bottom interior, a three-point hollow base, and a woven ceramic exterior. Each does a different job, from managing brew style to keeping water flowing evenly through the grounds.
The Transit Base sits beneath the ceramic dripper and controls the outflow with a turning knob. With the knob open, it brews like a fast-flowing flat-bottom pour over and gives a filter-style cup. With the knob closed, water stays in contact with the grounds for as long as you choose. This gives a more evenly extracted, immersion-led cup. You can also choose to variate the flow rate and explore the recipe that works best for your coffee.
The Tri-Spin FS Flat Transit belongs to DragonFly's Tri-Spin series, also known by its Chinese name Xuanwu (玄武), after the mythological figure represented in the dripper's design language. The model was named a winner of the German Design Award 2026, recognized alongside other DragonFly coffee pieces for combining extraction control with a distinct visual identity.
DragonFly Design was founded in 1996 in Taipei by Jeff Dayu Shi [石 大宇], who has spent much of his career working with bamboo and other traditional Chinese materials. The International Bamboo and Rattan Organization named him one of its 100 Heroes of China's Bamboo Industry for that work, and his designs have won the German Design Award, Red Dot, and iF Design Award, among others. That same material focus carries into DragonFly's coffee equipment, including this dripper, where the exterior surface uses a woven bamboo-inspired texture applied to New Bone China rather than a plain ceramic wall.
With the knob open, the Transit brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the knob closed, water stays in contact with the grounds for as long as you choose, then drains when you open it, giving a fuller, immersion-led cup. The base is built to hold its position as you turn the knob, so the dripper stays steady through the change. You can also variate the flow rate and explore your own new recipe for the coffee you choose to experiment with.
It holds 280ml, brews 1 to 2 servings, and takes 185 flat-bottom paper filters. The dripper can go in the dishwasher, while the Transit Base is rinsed by hand and wiped or left to air dry.
It comes in three combinations: a White dripper on a Black base with a Black knob, a Black dripper on a Black base with a Black knob, and a Black dripper on a Black base with a Blue knob.
• Rib structure: Twenty raised internal ribs support the filter paper and keep its shape through the brew.
• Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
The outer wall of the dripper carries a texture based on Wulong Weaving, a Chinese bamboo weaving technique. The texture forms an interwoven geometric pattern of repeating characters, bringing an element of Chinese tea culture to coffee brewing.

• Transit Dripper: DragonFly Tri-Spin FS Flat Transit Dripper (280ml) x 1
• Transit Base: DragonFly Tri-Spin FS Flat Transit Base x 1, in the knob color of your chosen option
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin FS Flat Transit (280ml) |
|
Weight |
TBC |
|
Dimensions |
Transit Dripper: 104mm top diameter x 60mm bottom diameter x 77mm height Transit Base: 110mm (L) x 112mm (W) x 78mm (H) |
|
Material |
Transit Dripper: new bone china Transit Base: PC/ABS, 316L stainless steel, silica |
|
Care |
Transit Dripper: dishwasher safe. Also safe in microwave ovens and dish dryers. Transit Base: rinse with water, then wipe or air dry. Keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
TBC |
|
Capacity |
280ml, 1 to 2 servings |
|
Filter |
185 flat-bottom paper filter |
|
Heat Resistance |
Transit Dripper: up to 120°C (248°F) |
|
Brewing Modes |
Drip (switch open), immersion (switch closed) |
For the 280ml size please use 185 filters.
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
Dragonfly Design Rock'n'Dew Coffee Glass Server - 650ml Classic Core Set
Precio habitual $68.00 Guardar $-68.00When coffee drains from a dripper into an open server, some of its aroma rises off with the steam before it ever reaches the cup. The Dragonfly Design Rock'n'Dew Coffee Glass Server is a 650ml glass server for pour over brewing, built to keep more of that aroma in the vessel. It pairs a closed lid with a spiral inner wall to increase contact and and a long handle set at 90 degrees to the spout, so you can brew, swirl, and serve with a turn of the wrist.
Dragonfly Design built the Rock'n'Dew around three priorities: protecting aroma, managing how coffee enters the server, and making the pour intuitive. It is crafted for competition brewing, where small losses in aroma and small inconsistencies in the pour are easy to notice.

The Rock'n'Dew Coffee Glass Server features a closed lid covers the server while coffee drains in. Volatile aromatic compounds that would otherwise escape during brewing stay inside the vessel and are released when the lid comes off at serving, which makes layered fragrance easier to pick up.
Inside the carafe, the glass wall carries a wave-like spiral texture modeled on the way water moves naturally. Brewed coffee runs along this curved surface instead of dropping straight to the base, which reduces splashing and turbulence as the server fills.

The Rock'n'Dew Coffee Glass Server features a handle and spout that are set 90 degrees apart, a layout drawn from traditional teapot design. Combined with a 9.5 elongated handle, this lets you lift, swirl, and pour using wrist motion alone rather than rotating from the shoulder. The reinforced base gives the server enough stability for light swirling mid-brew, which mixes the stronger early drips with the rest of the brew without needing a spoon.
Set your pour over dripper on the Rock'n'Dew and brew as you normally would, with the lid closed over the server. The server is designed as part of a modular setup and works with a range of pour over drippers. A dedicated placement cup acts as both a stand and an organizer, giving the dripper somewhere clean to rest once brewing is done.

Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml)
Precio habitual $95.75 Guardar $-95.75A 62° conical dripper sized for 1- 4 cup, with an internal groove structure that keeps the drawdown steady at larger doses
The CT62 Dripper 02 (390ml) from DragonFly Design Center is a new bone china conical dripper made for a larger, 1-4 cup brew. It carries the 62° angle, internal grooves, and exterior texture of the original CT62, with a taller body that raises capacity from 1 to 2 servings to 1 to 4. It is available in Black and White.

The cone is set at 62°, a proprietary angle DragonFly developed to give a broad, stable extraction range. It responds well to a centered pour or a wider circular spiral pour, so you can adjust your technique without the brew losing balance.
Inside, 24 grooves guide water down the wall. Instead of the raised ribs found in many conical drippers, the CT62 uses recessed channels, with an added ring of horizontal grooves near the base to regulate flow through the lower part of the cone.
DragonFly refined this channel design through repeated testing. The goal is a drawdown that holds a consistent pace from start to finish, which helps reduce clogging and the bitterness, astringency, and sourness that come with uneven extraction.
Set the DragonFly Design Center CT62 Transit Pro Dripper 02 (390ml) and you have instantly transformed it to a hybrid brewer with variable flow rate.
The dripper sits over a cup or server for standard pour over brewing. At 390ml, it handles 1 to 4 servings, so the same brewer works for a single morning cup or a shared pot. It takes 1-4 cup paper filters.
Its base has an integrated raised ring that seats into the DragonFly Conical Dripper Transit Base. It also pairs with the DragonFly Conical Dripper Holder and Silicone Ring for a more secure, stable setup on the brew table.
The new bone china body is heat resistant to 120°C (248°F) and safe for dishwashers, microwave ovens, and dish dryers.
• 62° conical geometry: A proprietary angle that gives a wide working range and room to vary pour style.
• 24 recessed channels: Guide water downward along the wall in place of raised ribs, for a steadier drawdown.
• Horizontal groove ring: Sits near the base and regulates flow through the lower cone as the bed settles.

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (Shanwen Jia) from China's Tang Dynasty. The 62 refers to the interior cone angle.
The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.
The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

• Dripper: DragonFly CT62 Dripper 02 (390ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
CT62 Dripper 02 (390ml) |
|
Weight |
250g net (415g gross, packaged) |
|
Dimensions |
119mm top diameter x 34mm bottom diameter x 92mm height |
|
Material |
New bone china (新骨瓷), matte glaze finish |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
390ml, 1 to 4 servings |
|
Filter |
V60 size 02, Sibarist Cone M, HIFLUX Folding V 02, ORIGAMI Cup4 paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Cone Angle |
62° |
|
Internal Structure |
24 grooves, recessed channels, horizontal groove ring near the base |
|
Designer |
Jeff Shi |
|
Compatible Accessories |
DragonFly Conical Dripper Transit Base · DragonFly Conical Dripper Holder and Silicone Ring |
|
Color |
Black, White |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center CT62 Coffee Dripper with Stand
Precio habitual $62.50 Guardar $-62.50A 62-degree conical dripper with a built-in stand that sits on your carafe and keeps the flow even from bloom to drawdown
The DragonFly CT62 from DragonFly Design Center is a new bone china conical dripper with a 62-degree interior angle, built to hold the filter close and keep the flow even, available in Grey, Black, and White. Its built-in stand rests on the rim of a carafe or serving vessel, so it brews straight into your server on its own.
The interior is an original DragonFly Design Center design, refined through repeated brewing tests to reach a uniform flow rate. The goal is a balanced drawdown, which helps prevent clogging and over-extraction and preserves the coffee's aroma and flavor.

The cone is set at 62 degrees so the filter paper sits snugly against the inner wall. With the paper in steady contact, water percolates through the bed at a repeatable rate from one brew to the next, keeping extraction consistent.

The CT in the DragonFly CT62 refers to its exterior texture, based on Shanwen armor (山文甲) from China's Tang Dynasty. The 62 refers to the interior cone angle.
The Shanwen design is an original concept from medieval China that takes a flat pattern and builds it directly into a three-dimensional form. DragonFly Design Center brought that approach to the dripper as a contemporary geometric exterior: curved surfaces and facets cover the full body, and the geometry repeats across it, giving the surface depth and perspective from any angle.
The built-in stand follows the same Shanwen Jia pattern, with one corner extended to form the handle, so the dripper and stand carry one visual language.

The built-in stand sits on the rim of a carafe or serving vessel and holds the dripper securely in place while you pour. Three curved sections at its center surround the bottom of the dripper to keep it from slipping.
One corner of the stand extends into a handle. It rises slightly at the tip and has concave and convex details on the top and underside, giving a secure three-finger grip when you set the dripper on the carafe or lift it off after drawdown.
The DragonFly CT62 brews 1 to 2 servings and takes V60 size 01 and 02 conical paper filters.
• 62-degree cone: Holds the filter paper snugly against the inner wall for consistent extraction.
• Flow-tested interior: Refined through repeated brewing tests for a uniform flow rate and less clogging.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
• Dripper: DragonFly CT62 with built-in stand x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
CT62 Coffee Dripper with Stand |
|
Weight |
260g net (390g gross, packaged) |
|
Dimensions |
113mm top diameter x 46mm bottom diameter x 70mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 servings |
|
Filter |
V60 size 01 and 02 conical paper filters, Sibarist Cone S, Hiflux Folding V 01 |
|
Cone Angle |
62 degrees |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Color |
Grey, Black, White |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Tri-Spin CT Flat Bottom Dripper - 255ml
Precio habitual $55.75 Guardar $-55.75The Tri-Spin CT Flat Dripper from DragonFly Design Center is a new bone china flat-bottom pour over dripper built to close that gap. It starts from the CT62 conical dripper and rebuilds it around a flat bottom, with a grooved inner wall and DragonFly's Tri-Spin base.
The inner wall is a flat surface cut with 12 long grooves and 12 short grooves. The filter paper adheres to a larger area of the wall, so there is less room for water to bypass the bed and more of each pour passes through the grounds.
The grooves act as flow guides and pressure relief channels, which keeps the drawdown smooth and the extraction even across the bed. The result is a even extracted cup with clear layers of sensory expression.
At the base, the Tri-Spin hollowed design with multiple grooves spreads the water's exit points to avoid concentration in the center. This reduces the risk of the clogging and helps water move through the whole bed. This matters even more with larger doses, where localized over-extraction is more likely.
DragonFly developed the CT Flat with competition brewing in mind, where a stable, repeatable extraction counts for more than speed.

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.
The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Paired with the DragonFly Flat-Bottom Transit Base, the dripper brews two ways. With the transit knob open, it runs as a flat-bottom pour over and gives a clean, filter-style cup. With the switch closed gives a fuller, immersion-style cup.
You can also choose to brew with a Bamboo Flat Dripper Holder – using it as a traditional pourover dripper.
It holds 255ml, brews 1 to 2 servings, and takes foldable flat-bottom filter paper or 185 flat-bottom paper filters.
• Groove structure: Twelve long and twelve short grooves on a flat inner wall let the filter sit closer to the wall while still guiding flow and relieving pressure.
• Tri-Spin hollowed base: Disperses the outflow instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

• Dripper: DragonFly Tri-Spin CT Flat Dripper (255ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin CT Flat Dripper (255ml) |
|
Weight |
221g net (324g gross, packaged) |
|
Dimensions |
110mm top diameter x 60mm bottom diameter x 75mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
255ml, 1 to 2 servings |
|
Filter |
Foldable flat-bottom filter paper or 185 flat-bottom paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Compatible Accessories |
DragonFly Flat-Bottom Switch Base · DragonFly Flat-Bottom Bamboo Dripper Holder |
|
Color |
Black, White |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml
Precio habitual $55.75 Guardar $-55.75A flat-bottom pour over drains evenly when the coffee bed stays level and water can exit across the whole base. Uneven flow usually starts where the filter meets the brewer: the paper folds against the wall, fines collect in the center, and the middle of the bed slows while the edges drain through.
The Tri-Spin FS Flat Dripper from DragonFly Design Center, also known by its Chinese name 三旋空玄武 (Xuanwu), is a new bone china flat-bottom brewer designed to keep that flow even. Its transit base lets you brew as a standard pour over, or close the knob and steep as an immersion.
Inside the dripper, 20 raised ribs hold the filter paper off the wall so it keeps its shape through the brew. With the paper supported, water moves through the bed at a more consistent rate, and results vary less from one brew to the next.
The wall angle is set to keep the flow rate quick while still allowing a finer grind. A finer grind raises extraction yield, so a faster drawdown can still reach a full extraction and keep a clear, layered flavor.
At the base, DragonFly's Tri-Spin hollowed design spreads the water's exit points across the base rather than concentrating them in the center. This reduces clogging and keeps water moving through the whole bed instead of stalling in the middle, which matters most at larger doses where localized over-extraction is more likely.

The dripper received a German Design Award in 2026.
The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.
The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

With the Transit Base open, it brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the switch closed, water stays in contact with the grounds until you open it, which gives a fuller, immersion-style cup.
Immersion is a forgiving starting point while your pour technique is still developing. The open setting gives experienced brewers direct control over pour rhythm and timing.

You can also choose to brew with a Bamboo Dripper Holder – using it as a traditional pourover dripper.
DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml brews 1 to 2 servings, and takes 185 flat-bottom paper filters. It is available in Shell Pink, Black, and White.
• Rib structure: Twenty raised internal ribs support the filter paper and hold its shape through the brew.
• Tri-Spin hollowed base: Spreads the outflow across the base instead of concentrating it in the center, which reduces clogging at larger doses.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
• Dripper: DragonFly Tri-Spin FS Flat Dripper (280ml) x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Tri-Spin FS Flat Dripper (280ml) |
|
Weight |
210g net (340g gross, packaged) |
|
Dimensions |
104mm top diameter x 60mm bottom diameter x 77mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
China |
|
Capacity |
280ml, 1 to 2 servings |
|
Filter |
185 flat-bottom paper filter |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Award |
German Design Award 2026 |
|
Color |
Shell Pink, Black, White |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center SA62 Saddle Dripper
Precio habitual $72.75 Guardar $-72.75Coming soon 10.9.26 - sign up for notification
A 62° conical bone china dripper with coral-pattern grooves, built for a quick, even drawdown for 1-2 Cup brew.
The SA62 Saddle Dripper from DragonFly Design Center is a new bone china conical dripper with a 62° wall angle and a grooved interior designed. It brews 1-2 cups with small conical filters and comes in Lilac, Grey, and Black.
Inside the SA62 Saddle Dripper, twelve long grooves run from the rim down to the outlet, evenly spaced around the wall. Eight shorter, curved grooves branch off them in a coral-like pattern, an original DragonFly design.

The groove pattern gives water more channels along the wall and toward the outlet. DragonFly designed it to speed up the flow rate and support an efficient extraction.
At the base, a ring lets the dripper sit on the DragonFly Transit Switch Base, so the same brewer can easily switch between a standard pour over and a hybrid setup.
For pourover, choose the DragonFly Bamboo Conical Dripper Holder with SA62 Silicone Ring for a traditional pourover and a snug fit.
The outer wall carries a repeating raised relief based on the saddle shape found in Tang Dynasty tri-color pottery (sancai): full, three-dimensional, and slightly upturned at the edges.
DragonFly arranges the relief in a regular pattern using a contemporary design language. It references the horse and saddle figures of Tang Dynasty ceramics, and marks 2026 as the Year of the Horse.

It takes Conical 01 and 02 size cone paper filters. Compatible with ORIGAMI 2Cup, Hiflux
High Fast Folding V01, and Sibarist Cone S.
Used on its own, it brews as a fast-flowing cone. Set on the Transit Switch Base, it pairs with DragonFly's switch system for more control over when the brew drains.
• Coral-pattern grooves: Twelve long grooves run top to bottom, with eight curved short grooves branching from them to speed up flow.
• 62° cone: The wall angle sets the shape of the coffee bed and fits standard V60 01 and 02 filters.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
• Dripper: DragonFly SA62 Saddle Dripper x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
SA62 Saddle Dripper |
|
Weight |
216g net (316g gross, packaged) |
|
Dimensions |
112mm top diameter x 34mm bottom diameter x 73mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 servings |
|
Filter |
Hario V60 01 or 02 paper filter |
|
Wall Angle |
62° |
|
Heat Resistance |
Up to 120°C (248°F) |
|
Compatible Base |
DragonFly Transit Switch Base |
|
Color |
Lilac, Gray, Black |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center “Caisson Ceiling” CC62 Dripper (with CT62 Groove)
Precio habitual $50.00 Guardar $-50.00Coming soon - sign up for notification
A 62° conical dripper with carved guide grooves, built to hold a steady drawdown from bloom to finish
On a small-dose cone, balance depends on how evenly the slurry drains. Water that bypasses the bed, or a flow that chokes near the outlet, pulls the cup toward under- or over-extraction.
The “Caisson Ceiling” CC62 Dripper from DragonFly Design Center is a new bone china conical dripper built on the CT62 interior, pairing a 62° cone with recessed guide grooves to keep the flow rate consistent through the brew. It brews 1-2 cups with small conical filters and comes in Pink and Green.
At 62°, the cone wall holds the paper in close contact, limiting bypass so the water you pour travels through the coffee bed rather than around it.
Where most conical drippers use raised ribs, the CC62 carves its channels into the wall. Water runs down these recessed longitudinal grooves, and a ring of channels at the base meters the outflow at the bottom of the cone.
The placement of that ring of channels, together with the shape and depth of the bottom cross-section, governs the final stage of the brew, when the bed settles toward the outlet. The result is a flow rate that neither rushes early nor stalls late, avoiding the bitterness and astringency of over-extraction and the sharp sourness of under-extraction.
It takes 1 to 2 cup cone filters, including ORIGAMI 1-2 cup filters, Sibarist Cone S, and Hiflux Folding V 01.
The new bone china body is heat resistant to 120°C (248°F) and dishwasher safe.
• 62° cone: Shared with the CT62, holding the paper close to the wall.
• Recessed longitudinal grooves: Carved into the wall in place of raised ribs.
• Transverse base ring: Regulates outflow at the bottom of the cone.
The exterior is based on a Chinese bamboo weaving technique, with strips interlaced horizontally and vertically in dense layers. Designed for the Year of the Snake, the weave’s outermost strip becomes a snake’s body.
Inverted and viewed from above, the pattern resembles a caisson ceiling, a structure that ancient Chinese architecture reserved for prestigious buildings. Like bamboo weaving, it is both structural and decorative, and the dripper takes its name from it.

• Dripper: DragonFly “Caisson Ceiling” CC62 Dripper x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
“Caisson Ceiling” CC62 Dripper (with CT62 Groove) |
|
Weight |
TBC |
|
Dimensions |
113mm top diameter x 30mm bottom diameter x 70mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
Made in China |
|
Capacity |
1 to 2 cups |
|
Filter |
1 to 2 cup cone filter: ORIGAMI 1-2 cup, Sibarist Cone S, Hiflux Folding V 01 |
|
Cone Angle |
62° |
|
Heat Resistance |
Up to 120°C (248°F) |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center “Mountain Path” MP62 Dripper with Coffee Blossom Channels
Precio habitual $50.00 Guardar $-50.00
A 62° new bone china cone for 1 to 2 servings, built to hold a consistent filter seat and an even drawdown
The “Mountain Path” MP62 Dripper from DragonFly Design Center is a new bone china pour over cone for 1-2 cup brew, designed for the Year of the Snake. It pairs a 62° wall angle with an interior groove pattern called the Coffee Blossom Channel, and takes small size conical paper filters.
The 62° angle gives the filter paper a tight fit against the dripper wall and bed forms consistently with a dialed-in recipe is easier to repeat.
Beneath the paper, the Coffee Blossom Channel continues the inward-sloping flow design of DragonFly’s CT62, with a revised number and layout of grooves. Twelve long grooves run down the wall in pairs, with a short groove set between each pair. Each short groove forks at its end like a snake’s tongue, and the branches meet the long grooves on either side to form a diamond-shaped petal. A smaller diamond sits between neighboring pairs.
Seen from above, the grooves form two coffee flowers set in a crisscross at the center of the cone. DragonFly describes the channel as a three-section design.
Product DetailsSet it on the DragonFly CC62 / FS62 / MP62 Dripper Holder over your server or mug. Rinse the filter with hot water to clear paper taste and preheat the cone, then bloom and pour to your recipe.
• Size 01: Hiflux Folidng V01, Sibarist Cone S, or Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC.
• 62° wall angle: Gives the filter a tight fit for even, repeatable bed formation.
• Coffee Blossom Channel: Paired long grooves and forked short grooves, continuing the inward-sloping flow design of the CT62.
• New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.
The outer wall carries a texture based on Mountain Path Bamboo Weaving, a Chinese bamboo weaving technique. Turned upside down, the cone takes the shape of a mountain, and the woven pattern reads as stone steps spiraling from the base to the peak.
Snake motifs are set evenly into the vertical bamboo strips, worked into the weave so they sit within the pattern rather than on top of it. DragonFly shaped the texture to follow the line of the cone as a symbol of steady progress upward.
• Dripper: DragonFly “Mountain Path” MP62 Dripper with Coffee Blossom Channel x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
“Mountain Path” MP62 Dripper with Coffee Blossom Channel |
|
Weight |
TBC |
|
Dimensions |
113mm top diameter x 30mm bottom diameter x 69mm height |
|
Material |
New bone china |
|
Care |
Dishwasher safe. Also safe in microwave ovens and dish dryers. |
|
Origin |
TBC |
|
Capacity |
1 to 2 servings |
|
Filter Size |
V60 01 or 02 size cone paper filter |
|
Recommended Filters |
Sibarist Filters - SMALL CONE for 01 · Sibarist Filters - MEDIUM CONE for 02 · Original ORIGAMI Conical Paper Filter for Small Dripper by CAFEC · Original ORIGAMI Conical Paper Filter for Medium Dripper by CAFEC |
|
Wall Angle |
62° |
|
Internal Structure |
Coffee Blossom Channel: 12 long grooves in pairs, forked short grooves forming diamond-shaped petals |
|
Heat Resistance |
Up to 120°C (248°F) |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center Conical Dripper Transit Base
Precio habitual $32.00 Guardar $-32.00A knob-controlled base for the DragonFly CT62 Transit Pro Dripper, letting it hold water for immersion or release it for drawdown
The Conical Dripper Transit Base from DragonFly Design Center is a knob-controlled base built for the DragonFly CT62 Transit Pro Dripper, available with a Black, White, Pink, or Purple knob. Turn the knob closed and the conical dripper becomes a full immersion brewer, holding the slurry for as long as your recipe calls for. Open it and the brew drains through the filter as a standard percolation pour over.
Setting the knob partway lets you meter the flow rate, so you can slow the drawdown without changing your grind size.
With the knob turned closed, water stays in contact with the grounds and extraction runs as immersion. Contact time is set by you, not by grind size and filter resistance. Turn the knob open and drawdown begins, finishing the brew as percolation, with water moving through the bed and the paper filter holding back fines and oils.
This makes hybrid recipes possible in a single brewer: a closed bloom for even saturation and degassing, an immersion phase to build body and extraction, then an open percolation finish for clarity. You can adjust the timing and balance of each phase on the fly, with no change to the dripper, filter, or grind.
The base comes apart in two sections joined by a magnetic connection, so it separates cleanly for rinsing and snaps back together for the next brew. Three feet keep it level on the server.
Set the CT62 Transit Pro Dripper on the base, place it over your server, and choose your starting configuration. With the knob closed, you control contact time directly. A closed bloom saturates the whole bed before any liquid drains, which reduces dry pockets and channeling and sets a foundation for even extraction.
With the knob open, the dripper behaves like a conventional conical pour over, and pour rate, pulse timing, and agitation drive the extraction.
The CT62 Transit Pro Dripper takes Size 02 conical paper filters.
• Knob control: A single knob opens and closes the flow path, moving between immersion and percolation mid-brew, with partial settings to adjust flow rate.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-controlled base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |

• Knob control: A single knob opens and closes the flow path, switching between immersion and drawdown mid-brew.
• Magnetic two-part base: The upper and lower sections join magnetically and detach for assembly and cleaning.
• Three-foot stand: A compact, three-foot footprint keeps the dripper stable over the server.
• Transit Base: DragonFly Conical Dripper Transit Base x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Conical Dripper Transit Base |
|
Weight |
150g net (300g gross, packaged) |
|
Dimensions |
110mm (L) x 112mm (W) x 82mm (H) |
|
Material |
Silicone, Tritan, POM, stainless steel (component breakdown TBC) |
|
Care |
Rinse with water, then wipe dry or air dry. Hand care only: keep out of the microwave, dishwasher, and dish dryer. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 Transit Pro Dripper |
|
Function |
Knob-operated switch base: closed for immersion, open for drawdown |
|
Knob Color |
Black, White, Pink, Purple |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center Bamboo Flat Dripper Holder with Silicone Ring
Precio habitual $24.00 Guardar $-24.00A bamboo holder and silicone ring that keep the Tri-Spin FS Flat Dripper seated level and steady on the vessel
The Bamboo Flat Dripper Holder from DragonFly Design Center is a four-petal bamboo base made for DragonFly’s flat-bottom dripper series, including the Tri-Spin FS Flat Dripper (280ml). Paired with the Tri-Spin FS Flat Dripper Silicone Ring, it gives the dripper a secure hold for an even flow.
The holder is shaped from bamboo into a four-petal outline with softened curves. Each of the four outward points is a gentle arc, so the holder can be picked up, placed, or adjusted from any side. Bamboo keeps it light on the table and warm to the touch.
Set the Tri-Spin FS Flat Dripper Silicone Ring securely in the bamboo the holder to form proper contact point to keeps the brewer aligned and cuts down on sliding and rocking.
![]()
Place the silicone ring in the center of the bamboo holder, then set the dripper into the ring. The holder is made for DragonFly’s flat-bottom dripper series and fits the DragonFly Design Center Tri-Spin FS Flat Dripper (280ml).
![]()
• Four-petal bamboo holder: Four outward points shaped with gentle arcs for handling from any side.
• Silicone ring: Seats the dripper at the center of the holder for a close, stable fit.
• Dedicated fit: Sized for DragonFly flat-bottom drippers, including the Tri-Spin FS Flat Dripper (280ml).
• Bamboo Flat Dripper Holder variant: DragonFly Bamboo Flat Dripper Holder x 1
• Silicone Ring variant: DragonFly Tri-Spin FS Flat Dripper Silicone Ring x 1
|
Brand |
DragonFly Design Center |
|
Product Name |
Bamboo Flat Dripper Holder |
|
Weight |
60grams (Gross) 43g (Net) |
|
Dimensions |
130mm x 130mm x 10mm |
|
Material |
Holder: bamboo |
|
Care |
Rinse after use, wipe gently, and keep dry. |
|
Origin |
Made in China |
|
Variants |
DragonFly Bamboo Flat Dripper Holder · DragonFly Tri-Spin FS Flat Dripper Silicone Ring |
|
Compatible Dripper |
DragonFly Design Center Tri-Spin FS Flat Dripper (280ml) |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center Bamboo Conical Dripper Holder with Silicone Ring
Precio habitual $20.50 Guardar $-20.50A bamboo holder and silicone ring that keep the DragonFly conical dripper level and steady while you pour
A conical dripper does its best work when it sits level and stays put. If it shifts on the server as the kettle stream hits the bed, the slurry tilts and water favors one side of the cone.
The Bamboo Conical Dripper Holder from DragonFly Design Center is a flat bamboo base made for the DragonFly CT62 / SA62 Conical Dripper. With the DragonFly CT62 / SA62 Dripper Silicone Ring fitted in its center, it rests between dripper and server and holds the dripper steady through the brew.
The setup has two parts, each with its own job. The bamboo holder is the frame, and the CT62 / SA62 silicone ring sits inside it as the contact point for the dripper.
The ring is shaped to match the texture of the dripper's outer wall. Once the dripper is seated, it stays balanced in the ring instead of resting on a hard, fixed edge, and the silicone adds grip where contact matters most.
The outline of the holder is based on the traditional shanwenjia motif. One corner extends into a point that works as a handle, so you can lift and reposition the holder with three fingers.
Bamboo keeps the piece light and gives it a visible natural grain.
Fit the silicone ring into the center of the bamboo holder, rest the holder on your server, then seat the DragonFly Conical Dripper in the ring.
Both pieces are available as options on this page. The complete setup uses the holder as the frame and the ring as the fitted seat for the dripper.
• Bamboo holder: Lightweight bamboo with a natural grain finish, shaped with an extended corner for lifting.
• CT62 / SA62 silicone ring: Matches the texture of the dripper's outer wall to keep it seated and balanced.
• Food-contact silicone: Conforms to GB4806.11-2016, China's national food safety standard for rubber materials in food contact.
• Holder option: DragonFly Bamboo Conical Dripper Holder x 1
• Silicone ring option:
DragonFly CT62 Dripper Silicone Ring x 1
or
DragonFly SA62 Dripper Silicone Ring
|
Brand |
DragonFly Design Center |
|
Product Name |
Bamboo Conical Dripper Holder |
|
Weight |
46g net (63g gross, packaged) |
|
Dimensions |
114mm (W) x 129mm (D) x 10mm (H) |
|
Material |
Holder: bamboo. Silicone ring: food-grade silicone, conforming to GB4806.11-2016. |
|
Care |
Rinse with water after use, wipe with a soft cloth, and keep dry. |
|
Origin |
Made in China |
|
Compatible Dripper |
DragonFly CT62 / SA62 Conical Dripper |
|
Paired Component |
DragonFly CT62 / SA62 Dripper Silicone Ring |
|
Options |
CT62 Dripper Silicone Ring / SA62 Dripper Silicone Ring |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
DragonFly Design Center 220 Flat-Bottom Paper Filter - 50 sheets
Precio habitual $14.25 Guardar $-14.25A 32gsm flat-bottom, 1-4 cup paper filter shaped for the DragonFly Tri-Spin FS Flat Dripper (390ml), for greater consistency with a deeper brew bed
The DragonFly 220 Flat-Bottom Paper Filter from DragonFly Design Center is a 32gsm virgin wood pulp filter made specifically for the DragonFly Tri-Spin FS Flat Dripper (390ml). Its pleated, cake-style form opens into a broad flat base matched to the dripper’s geometry, so the coffee bed builds deeper and more uniformly for consistent percolation. Each pack holds 50 filters.
The filter is designed to the specifications of 390ml Tri-Spin FS. The dripper’s 20 raised ribs hold the pleated walls in shape so the paper does not collapse against the brewer wall, while the flat base sits over the Tri-Spin hollowed base, which distributes outflow across several exit points instead of one central orifice.
With the paper seated evenly, the bed settles at a consistent depth and the water meets the same resistance on each brew. Flow rate and contact time stay repeatable, so when total brew time or extraction shifts, you can trace it to grind size, dose, or pour structure rather than the filter.
A deeper bed also lengthens the path water takes through the coffee, which extends contact time during percolation and supports a fuller extraction at a given grind setting.
Pre-wet the paper with hot water to seat it against the ribs and preheat the brewer, then discard the rinse water before dosing. You can do so by first adding a small amount directly to the center of the filter to set the base even. As the water moves up towards to folds, add more water in spiral motion to thoroughly rinse the paper.
Level the bed before the bloom for an even drawdown. Switch open for percolation, or switch closed for a full immersion steep before drawdown.
DragonFly Tri-Spin FS Flat Dripper (390ml).

• Basis weight: 32gsm virgin wood pulp paper.
• Shape: Pleated, cake-style flat-bottom form matched to the Tri-Spin FS Flat Dripper (390ml).
• Food contact: Specified for direct and aqueous food contact, listed against GB 4806.1-2016, GB 4806.8-2022, GB 9685-2016, and GB 31603-2015.
Keep the box at room temperature in a dry place, away from direct light and strong odors. Stored this way, the filters have a shelf life of five years.
• Filters: DragonFly 220 Flat-Bottom Paper Filter x 50, boxed
|
Brand |
DragonFly Design Center |
|
Product Name |
220 Flat-Bottom Paper Filter |
|
Weight |
105.5 gram |
|
Dimensions |
4 x 4 x 5.5 inches |
|
Material |
Virgin wood pulp paper, 32gsm |
|
Care |
Store at room temperature in a dry place. Keep away from light and strong odors. |
|
Origin |
Made in China |
|
Paper Weight |
32gsm |
|
Quantity |
50 filters per pack |
|
Shape |
Flat-bottom, pleated cake-style |
|
Compatibility |
DragonFly Tri-Spin FS Flat Dripper (390ml) |
|
Shelf Life |
5 years |
Los colores de los productos reales pueden verse ligeramente diferentes a los de las fotografías del producto. Esto se debe a las distintas configuraciones de los monitores. Cada monitor o pantalla móvil tiene una capacidad diferente para mostrar colores, y cada individuo puede ver estos colores de manera diferente. Además, las condiciones de iluminación en el momento en que se tomó la fotografía también pueden afectar el color de la imagen.
Los productos que tienen una capa brillante también se verán de manera diferente bajo diferentes configuraciones de iluminación. Los colores pueden parecer diferentes incluso bajo una luz fluorescente o una bombilla de pantalla más cálida.
| Item | Price | Qty | Total | |
|---|---|---|---|---|
| Subtotal |
$0.00 |
|||
| Shipping | ||||
| Total | ||||