There is a particular pleasure in watching coffee settle into a vessel that was made for it. The carafe on your counter is not just a holding place. It is part of the brew, part of the ritual, and part of what the cup becomes.

The Pourcano Carafe is a 500ml borosilicate glass server designed for shared brews and single-session pours alike. Its wide, bulbous body invites a gentle swirl that aerates the coffee as it settles, coaxing out acidity and releasing aromatics that a narrower vessel might hold back. It is a small detail that makes a quiet difference.

Designed as a companion to the Graycano Dripper, it fits naturally into a pour over setup without asking anything extra of the brewer.

Built Around the Brew

Borosilicate glass was chosen because it handles thermal stress without issues, moving from a cold counter to a hot brew and back again without the risk of cracking that comes with ordinary glass. Glass is non-porous, meaning it does not hold flavor between brews and does not interfere with what is in the cup.

The body shape was not accidental. The wider diameter at the belly of the carafe creates the room needed for an effective swirl. Swirling a finished brew, even briefly, allows the coffee to open up, softening sharp edges and letting the natural acidity come forward without bitterness. It is the same principle a sommelier applies to wine, brought into the pour over ritual.

The handle was designed for the act of pouring, not just carrying. Its ergonomic form keeps the hand relaxed during a controlled, steady pour, so the carafe feels like an extension of the process rather than an afterthought at the end of it.

Product Details

The Setup

The Pourcano Carafe sits cleanly beneath conical and flat bottom brewers, providing a stable base for the drip-through. When using a conical dripper without a dedicated stand, a compatible holder is recommended to keep the dripper stable and the brew uninterrupted. It is sized for a single full brew or a shared pour between two.

Compatible with conical brewers including the Graycano Dripper, Origami Dripper, Suprima Instrument SD-1R, and Hario V60, as well as flat bottom brewers such as the Solo Dripper and April Brewer.

What’s in the Box

•       Pourcano 0.5L Borosilicate Glass Carafe x 1

The Carafe

•       Glass: High-quality borosilicate construction, heat-resistant and crystal-clear for a clean view of the brew

•       Spout: Non-drip design for a smooth, mess-free pour from start to finish

•       Handle: Ergonomically shaped for a comfortable, controlled grip throughout the pour

Specifications

Capacity: 500ml (0.5L)

Weight: 275g

Material: High-quality borosilicate glass

Care: Dishwasher safe. Handle with care to avoid impact damage.

Origin: Made in China

The Pourcano Bundle brings together the Graycano Pourcano 500ml Borosilicate Glass Carafe with two Cupcano Glass Small cups. The carafe collects the brew. The cups receive it. Everything is sized to work together: a single session pour over yields enough for two, served into glasses designed to open up whatever is in them.

Both pieces come from the Graycano ecosystem and share the same design language: minimal, functional, and honest about what they are.

Two Pieces, One System

The Pourcano Carafe was developed as the dedicated server for the Graycano Dripper. Its wide, bulbous body is not decorative: the wider belly creates enough room for an effective swirl after drawdown, which aerates the coffee and allows acidity to come forward without sharpness. It is the same principle a sommelier applies to wine, brought into the pour over ritual. The borosilicate glass is non-porous, so it carries nothing between brews, and thermally stable enough to go from a cold counter to a hot brew without concern.

The Cupcano Glass Small follows the same thinking. Its wine glass-inspired bowl shape increases the liquid surface area, giving aromatic compounds more room to collect before each sip. At 110ml usable capacity, it is sized for espresso, short blacks, piccolo lattes, and the kind of careful pour over serving where less in the cup means more attention to what is there. The borosilicate walls are thin and lightweight, and the handleless form puts the warmth of the drink directly in the hand.

The Carafe

The Pourcano Carafe holds 500ml and sits cleanly beneath conical and flat bottom brewers. Its ergonomic handle keeps the hand relaxed during a controlled pour. The non-drip spout produces a clean, mess-free stream from start to finish. It is compatible with conical brewers including the Graycano Dripper, Origami Dripper, Suprima Instrument SD-1R, and Hario V60, as well as flat bottom brewers such as the Solo Dripper and April Brewer.

The Cups

Two Cupcano Glass Small cups are included. Each holds 110ml usably, with 210ml total capacity to the rim. The wide-bowl form is inspired by wine glassware, where the shape is chosen to direct aroma toward the nose before the drink reaches the palate. Lightweight and clear, the borosilicate construction lets you see the colour of the coffee as you serve.

Compatible Brewers

The Pourcano Carafe pairs with conical brewers including the Graycano Dripper, Origami Dripper Small, Origami Dripper Medium, Suprima Instrument SD-1R, and Hario V60, and with flat bottom brewers including the Solo Dripper and April Brewer. A compatible holder is recommended when using a conical dripper without a dedicated stand.

What’s in the Box

•       Pourcano 0.5L Borosilicate Glass Carafe  x 1

•       Cupcano Glass Small (210ml)  x 2

Specifications

Pourcano Carafe

Weight  275g

Capacity  500ml (0.5L)

Material  Borosilicate glass

Care  Dishwasher safe. Handle with care to avoid impact damage.

Origin  Made in China

Cupcano Glass Small (x2)

Weight  

Capacity  110ml (usable) / 210ml (to the rim)

Material  Borosilicate glass

Care  Hand washing recommended. Confirm dishwasher compatibility with supplier before publishing.

Origin  Made in China

*El Gotero mediano en color Chocolate con leche va a ser descontinuado y actualmente está a la venta*

Una cervecera de porcelana con 400 años de historia

Hecho de arcilla minoware, el Origami Dripper tiene 400 años de historia de producción de minoware en la región de Gifu, famosa por su papel washi y su cerámica.

El minoware es una técnica de fabricación de cerámica que tiene entre 400 y 500 años y sólo unas pocas docenas de artesanos que quedan en Japón todavía conocen el oficio. Al comprar un Gotero de Origami, incorporas esta rica tradición a tu rutina de preparación de café.

Excelente cafetera compatible con filtros ondulados y cónicos.

Elaborado con arcilla de alta densidad, el Origami tiene excelentes propiedades de retención de calor. Cuando se usa con el filtro cónico, los 20 pliegues fomentan un tiempo de preparación más rápido al permitir un flujo de aire más rápido. Cuando se usa con un filtro estilo onda, se puede usar como cafetera de base plana.

Información del Producto

Este Origami Dripper de forma elegante viene en varios colores y dos tamaños.

The UFO Dripper  V3 is a standalone dripper that can be adapted to the "Hario Switch" brewing system.

Geometry That Guides Extraction

At the core of the V3 is an 80° interior angle designed to promote steady drawdown while maintaining even bed saturation. This angle supports efficient flow through the coffee bed, helping reduce channeling and minimizing stall. Rather than relying on aggressive flow restriction or mechanical intervention, the structure itself regulates movement and extraction.

This geometry also improves performance across a wider grind spectrum - extraction remains controlled and predictable, allowing grind size and pour adjustments to translate clearly into the cup.

Profiles remain expressive yet structured.

Negative Channels and Flow Stability

The negative channel design supports balanced airflow during drawdown, preventing vacuum lock and reducing turbulence. By stabilizing the brew bed and minimizing uneven water distribution, the V3 maintains clarity and a controlled flow.

The result is faster, consistent drawdown without sacrificing balance.

Expanded Capacity for Recipe Flexibility

The larger brew chamber increases practical flexibility. It accommodates higher doses and a broader range of brew ratios while offering greater tolerance for controlled agitation. This enables movement between lighter, clarity-focused brews and fuller extractions without destabilizing the bed.

Designed for Hybrid Brewing

The V3 functions as a standalone percolation dripper with stable flow characteristics. It is equally engineered for adaptation. When paired with the Hario Switch base, it becomes a hybrid immersion system.

In this configuration, you can extend contact time, hold water before release, and intentionally increase extraction depth. The same geometry that supports clean percolation also ensures controlled immersion drawdown once the valve is opened.

One brewer with two distinct extraction approaches. The 80 degree UFO Dripper V3 delivers structural clarity, adaptable workflow, and repeatable results without unnecessary complexity.

Material: Food Safe Triton Resin

Weight: 250g approx

For up to 4 cup brewing.