Red and Pink Color Product Collection

A 280ml bone china flat-bottom dripper for 1 to 4 servings, made to sit on a transit base for switch-controlled brewing or a bamboo holder for a standard pour over

A flat-bottom pour over drains evenly when the coffee bed stays level and water can exit across the whole base. Uneven flow usually starts where the filter meets the brewer: the paper folds against the wall, fines collect in the center, and the middle of the bed slows while the edges drain through.

The Tri-Spin FS Flat Dripper from DragonFly Design Center, also known by its Chinese name 三旋空玄武 (Xuanwu), is a new bone china flat-bottom brewer designed to keep that flow even. Its transit base lets you brew as a standard pour over, or close the knob and steep as an immersion.

How the Tri-Spin FS Manages Flow

Inside the dripper, 20 raised ribs hold the filter paper off the wall so it keeps its shape through the brew. With the paper supported, water moves through the bed at a more consistent rate, and results vary less from one brew to the next.

The wall angle is set to keep the flow rate quick while still allowing a finer grind. A finer grind raises extraction yield, so a faster drawdown can still reach a full extraction and keep a clear, layered flavor.

At the base, DragonFly's Tri-Spin hollowed design spreads the water's exit points across the base rather than concentrating them in the center. This reduces clogging and keeps water moving through the whole bed instead of stalling in the middle, which matters most at larger doses where localized over-extraction is more likely.

The dripper received a German Design Award in 2026.

The Shanwen Jia Exterior

The outer wall carries the Shanwen Jia (山文甲) pattern first used on the CT62. Shanwen Jia, also known as Shanwen Armor, is a Tang Dynasty armor recognized by its repeating mountain pattern. On the dripper, that pattern wraps the outer wall as a continuous geometric repeat.

The exterior is the link between the two brewers. The CT62 pairs it with a conical interior, and the Tri-Spin CT pairs it with a flat bed and a grooved wall.

Product Details

Brewing with the Transit Base

With the Transit Base open, it brews as a fast-flowing flat-bottom pour over and gives a clean, filter-style cup. With the switch closed, water stays in contact with the grounds until you open it, which gives a fuller, immersion-style cup.

Immersion is a forgiving starting point while your pour technique is still developing. The open setting gives experienced brewers direct control over pour rhythm and timing.

You can also choose to brew with a Bamboo Dripper Holder – using it as a traditional pourover dripper.

DragonFly Tri-Spin FS Flat Bottom Dripper - 280ml brews 1 to 2 servings, and takes 185 flat-bottom paper filters. It is available in Shell Pink, Black, and White.

The Tri-Spin Base and Rib Structure

•       Rib structure: Twenty raised internal ribs support the filter paper and hold its shape through the brew.

•       Tri-Spin hollowed base: Spreads the outflow across the base instead of concentrating it in the center, which reduces clogging at larger doses.

•       New bone china body: Heat resistant to 120°C (248°F). Safe for dishwashers, microwave ovens, and dish dryers.

What's in the Box

•       Dripper: DragonFly Tri-Spin FS Flat Dripper (280ml) x 1

Specifications

*El Gotero mediano en color Chocolate con leche va a ser descontinuado y actualmente está a la venta*

Una cervecera de porcelana con 400 años de historia

Hecho de arcilla minoware, el Origami Dripper tiene 400 años de historia de producción de minoware en la región de Gifu, famosa por su papel washi y su cerámica.

El minoware es una técnica de fabricación de cerámica que tiene entre 400 y 500 años y sólo unas pocas docenas de artesanos que quedan en Japón todavía conocen el oficio. Al comprar un Gotero de Origami, incorporas esta rica tradición a tu rutina de preparación de café.

Excelente cafetera compatible con filtros ondulados y cónicos.

Elaborado con arcilla de alta densidad, el Origami tiene excelentes propiedades de retención de calor. Cuando se usa con el filtro cónico, los 20 pliegues fomentan un tiempo de preparación más rápido al permitir un flujo de aire más rápido. Cuando se usa con un filtro estilo onda, se puede usar como cafetera de base plana.

Información del Producto

Este Origami Dripper de forma elegante viene en varios colores y dos tamaños.